TPV MSYSTEM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
MODEL: TPV TPV SPECIFICATIONS ES-3320 Rev.11 Page 1/2 http://www.m-system.co.jp/ Super-mini Two-wire Signal Conditioners T-UNIT P/I TRANSDUCER Functions & Features
- Converting a standard pneumatic signal into a proportional 4 – 20 mA DC output
- Monitor terminals
- High-density mounting ZERO SPAN 25 (.98) (2.95) (2.36) mm (inch) MODEL: TPV[1]
ORDERING INFORMATION
- Code number: TPV[1] Specify a code from below for [1]. (e.g. TPV/A2S/P7) [1] OPTIONS (multiple selections) Input blank: 0.2 – 1.0 kgf/cm2 /A1S: 19.6 – 98.1 kPa /A2S: 20 – 100 kPa /A3S: 20.7 – 103.4 kPa /A2: 0.2 – 1.0 bar /A3: 3 – 15 psig Pneumatic Connection blank: Rc 1/4" /P7: 1/4" NPT fitting GENERAL SPECIFICATIONS Construction: Stand-alone; terminal access at the front Connection Output: Euro type terminal (applicable wire size: 0.25 to 1.5 mm2, stripped length 7 mm) Pneumatic: Rc 1/4" or 1/4" NPT female (torque ≤ 12 N·m) Grounding: M4 screw terminal (torque: 1.2 N·m) Screw terminal
- Grounding: Nickel-plated brass Housing material: Diecast aluminum Zero adjustment: -5 to +5 % (front) Span adjustment: 95 to 105 % (front) INPUT SPECIFICATIONS ■ Input 19.6 – 98.1 kPa, 0.2 – 1.0 kgf/cm2 20 – 100 kPa, 0.2 – 1.0 bar 20.7 – 103.4 kPa, 3 – 15 psig OUTPUT SPECIFICATIONS Output: 4 – 20 mA DC Load resistance vs. supply voltage: Load Resistance (Ω) = (Supply Voltage (V) – 12 (V)) ÷ 0.02 (A) (including leadwire resistance) 10 12 15 20 25 28 200 400 600 800 LOAD RESISTANCE [Ω ] SUPPLY VOLTAGE [V ] (600Ω maximum at 24V DC) INSTALLATION Supply voltage: 12 – 28 V DC Operating temperature: -5 to +60°C (23 to 140°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: Surface Weight: 150 g (0.33 lb) PERFORMANCE in percentage of span Accuracy: ±0.3 % Temp. coefficient: ±0.03 %/°C (±0.02 %/°F) Response time: ≤ 0.5 sec. (0 – 90 %) Permissible overrange: 196 kPa (2.0 kgf/cm2, 1.96 bar, 28 psig)
MODEL: TPV TPV SPECIFICATIONS ES-3320 Rev.11 Page 2/2 http://www.m-system.co.jp/ EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch) 18 (.70) 19 (.75) 25 (.98) 53 (2.08) 60 (2.36) 60 (2.36) (.51) 75 (2.95) PNEUMATIC CONNECTION Rc 1/4” or 1/4” NPT EURO TYPE TERMINALS 2 – 4.4 (.17) dia. MTG HOLE NPT FITTING approx. 27 (1.06) M4 (.16) SCREW
- When mounting, no extra space is needed between units. SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Semiconductor Pressure Sensor Constant Current Differential AmplifierINPUT Z S Output Driver 2 1 + mA MONITOR 3 + LOADOUTPUT 24V DC 4 – 20mA DC Specifications are subject to change without notice.