DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

FENG-JUI TECHNOLOGY CO., LTD SMD POWER INDUCTOR-RoHS Y o u r P e r f e c t I n d u c t o r Rev.1702 TPRH1205M TYPE

  • FEATURE 1. Low core loss for high frequency power application 2. Mn-Zn material of drum core, High saturation
  • Applications 1. Portable communication equipment, notebook computer 2. Hard Disk drives, and other electronic equipment
  • Shape and Dimension ●Schematics and Land Patterns(mm)
  • Specification Part Number L(uH) STAMP DCR( Ω Max) Isat(A) Irms(A) TPRH1205M-R47N 0.47±30% R47 0.0036 33.2 14.7 TPRH1205M-1R0N 1.0±30% 1R0 0.0051 23.7 12.7 TPRH1205M-1R5N 1.5±30% 1R5 0.0047 18.4 12.9 TPRH1205M-2R2N 2.2±30% 2R2 0.0040 15.1 10.6 TPRH1205M-3R3N 3.3±30% 3R3 0.0105 12.8 8.63 TPRH1205M-4R7N 4.7±30% 4R7 0.0132 9.76 7.67 TPRH1205M-6R8N 6.8±30% 6R8 0.0168 8.74 6.81 TPRH1205M-8R2N 8.2±30% 8R2 0.0192 7.90 6.41 TPRH1205M-100M 10±20% 100 0.0231 7.22 5.57 TPRH1205M-150M 15±20% 150 0.0363 5.72 4.45 TPRH1205M-220M 22±20% 220 0.0462 4.74 3.95 TPRH1205M-330M 33±20% 330 0.064 3.86 3.19 TPRH1205M-470M 47±20% 470 0.097 3.13 2.59 TPRH1205M-680M 68±20% 680 0.144 2.64 2.13 TPRH1205M-820M 82±20% 820 0.162 2.41 2.01 TPRH1205M-101M 100±20% 101 0.214 2.21 1.75 TPRH1205M-151M 150±20% 151 0.33 1.79 1.41 TPRH1205M-221M 220±20% 221 0.50 1.47 1.14 TPRH1205M-331M 330±20% 331 0.65 1.19 1.00 5.40REF 12.60REF 2.80REF

FENG-JUI TECHNOLOGY CO., LTD SMD POWER INDUCTOR-RoHS Y o u r P e r f e c t I n d u c t o r Rev.1702 Part Number L(uH) STAMP DCR( Ω Max) Isat(A) Irms(A) TPRH1205M-471M 470±20% 471 0.95 1.100 0.826 TPRH1205M-681M 680±20% 681 1.44 0.834 0.673 TPRH1205M-821M 820±20% 821 1.63 0.758 0.632 TPRH1205M-102M 1000±20% 102 2.13 0.695 0.552 Note1. Measurement frequency of Inductance value : at 100KHz, 0.25V Note2. Measurement ambient temperature of L, DCR and IDC : at 25℃ Note3. Isat: DC current at which the inductance drops 30%(typ) from its value without current Note4. Irms: Average current for 40℃ temperature rise from 25 ℃ ambient(typical) Note5 Inductance tolerance: M: ±20%, N: ±30%

  • Order Code(Part Number) 1. TYPE NAME : TPRH1205M 2. INDUCTANCE VALUE : 100(10uH) 3. INDUCTANCE TOLERANCE : M(±20%)

FENG-JUI TECHNOLOGY CO., LTD SMD POWER INDUCTOR-RoHS Y o u r P e r f e c t I n d u c t o r Rev.1702 GENERAL CHARACTERISTICS 1. Operating temperature range: -40 TO + 125 ℃(Includes temperature when the coil is heated) 2. External appearance: On visual inspection, the coil has no external defects. 3. Terminal strength: After soldering. Between copper plat e and terminals of coil. Push in two directions of X.Y withstanding at below conditions. Terminal should not peel off. (refer to figure at right) 5. 0N 60 sec. 4. Insulating resistance: Over 100M Ω at 100V D.C. between coil and core. 5. Dielectric strength: No dielectric breakdow n at 100V D.C. for 1 minute between coil and core. 6. Temperature characteristics: Indu ctance coefficient (0~2,000)x10-6/℃(-25~+80℃ degree Celsius), inductance deviation within±5.0%, after 96 hours. 7. Humidity characteristics(Moisture Resistance): Indu ctance deviation within ±5%, after 96 hours in 90~95% relative humidity at 40 ±2℃and 1 hour drying under normal condition. 8. Vibration resistance: Inductance deviation within ±5%, af ter vibration for 1 hour. In each of three orientations at sweep vibration (10~55~10 Hz) with 1.5mm P-P amplitudes. 9. Shock resistance: Inductance deviation within ±5 %, after being dropped once with 981m/s2 (100G) shock attitude upon a rubber block method shock testing machine, in three different orientations. 10. Resistance to Soldering Heat: 260℃, 10 seconds(See attached recommend reflow) 11. Storage condition: Temperature Range: 0 ℃ ~ 35 ℃；-40℃ ~ 125 ℃ (after PCB) ，Humidity Range: 50% ~ 70% RH 12. Use components within 12 months. If 12 months or more have elapsed, check solderability before use. 13. Reflow profile recommend: 260 ℃ 230 ℃ 300 250 200 150 100 T( ℃ ) T(s 300240180120600 Lead-free heat endurance test 245℃ Peak 230℃ 170±10℃,60-120 S 300 250 200 150 100 T(℃) T(s) 300240180120600 Lead-free the recommended reflow condition