TPRH10D50F TRANSKO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Rev 1: 05 -04 -2019 Power Inductor SMD (10.1 X 10.0 X 5.1 mm)

FEATURES

  • Magnetic shielded • Halogen Free RoHS compliant
  • High current • Low DCR SPECIFICATION DC Resistance Rated DC Current (A) Typ. Part No. Inductance (µH) Marking (mΩ) Max. TPRH10D50F -1R5_ 1.5 1R5 5.8 10.5 8.30 TPRH10D50F -2R2_ 2.2 2R2 7.2 9.25 7.50 TPRH10D50F -3R3_ 3.3 3R3 10.4 7.80 6.50 TPRH10D50F -4R7_ 4.7 4R7 12.3 6.40 6.10 TPRH10D50F -6R8_ 6.8 6R8 18 5.40 5.40 TPRH10D50F -8R2_ 8.2 8R2 20 4.85 5.00 TPRH10D50F -100_ 10 100 26 4.45 4.45 TPRH10D50F -120_ 12 120 33 4.00 3.80 TPRH10D50F -150_ 15 150 41 3.60 3.40 TPRH10D50F -180_ 18 180 46 3.20 3.10 TPRH10D50F -220_ 22 220 61 2.95 2.90 TPRH10D50F -270_ 27 270 69 2.70 2.60 TPRH10D50F -330_ 33 330 84 2.40 2.50 TPRH10D50F -390_ 39 390 106 2.30 2.25 TPRH10D50F -470_ 47 470 130 2.00 2.00 TPRH10D50F -560_ 56 560 149 1.90 1.90 TPRH10D50F -680_ 68 680 201 1.65 1.60 TPRH10D50F -820_ 82 820 227 1.50 1.45 TPRH10D50F -101_ 100 101 253 1.35 1.35 TPRH10D50F -121_ 120 121 303 1.28 1.18 TPRH10D50F -151_ 150 151 370 1.12 1.10 TPRH10D50F -181_ 180 181 419 1.04 1.00 TPRH10D50F -221_ 220 221 500 0.94 0.94 TPRH10D50F -271_ 270 271 672 0.84 0.80 TPRH10D50F -331_ 330 331 812 0.75 0.73 TPRH10D50F -391_ 390 391 953 0.70 0.70 TPRH10D50F -471_ 470 471 1290 0.60 0.54 TPRH10D50F -561_ 560 561 1430 0.54 0.52 TPRH10D50F -681_ 680 681 1600 0.52 0.51 TPRH10D50F -821_ 820 821 1770 0.50 0.48 TPRH10D50F -102_ 1000 102 1990 0.48 0.42
  • Inductance tolerance: Letter at end of part number N = ±30% ; M = ±20%
  • Measurement frequency of Inductance value : at 100KHz, 0.25V
  • Test equipment: CH1062A / CH1320

Rev 1: 05 -04 -2019 REEL DIMENSIONS (750 pcs per reel) mm W1 24.00±0.3 I 1.75±0.1 F 11.50±0.1 P0 4.00±0.1 G 2.00±0.1 P1 16.00±0.1 C 10.50±0.1 t0 0.35±0.05 D 10.50±0.1 H 5.20±0.1 mm W 330±1.5 D 21.5+0.5/-0 C 13+0.5/-0.2 T1 24.5+0.5/-0 N 100±1.5 T2 29.5±0.4 E 2.00±0.5 A B C D E F SCHEMATIC DIMENSIONS SOLDER PATTERN

Rev 1: 05 -04 -2019 1.Operating temperature range -40 TO + 105°C (Includes temperature when the coil is heated) 2. External appearance On visual inspection, the coil has no external defects. 3. Terminal strength After soldering. Between copper plate and terminals of coil. Push in two directions of X.Y withstanding at below conditions. Terminal should not peel off. (refer to figure at right) 5.0N 60 sec. 4. Insulating resistance Over 100MΩ at 100V D.C. between coil and core. 5. Dielectric strength No dielectric breakdown at 100V D.C. for 1 minute between coil and core. 6. Temperature characteristics Inductance coefficient (0~2,000)x10 -6 /°C ( -25~+80°C) inductance deviation within ±5.0%, after 96 hours 7. Humidity characteristics (Moisture Resistance) Inductance deviation within ±5%, after 96 hours in 90~95% relative humidity at 40 ±2°C and 1 hour drying under normal condition. 8. Vibration resistance Inductance deviation within ±5%, after vibration for 1 hour. In each of three orientations at sweep vibration (10~55~10 Hz) with 1.5mm P -P amplitudes. 9. Shock resistance Inductance deviation within ±5%, after being dropped once with 981m/s 2 (100G) shock attitude upon a rubber block method shock testing machine, in three different orientations. 10. Resistance to Soldering Heat: 260°C, 10 seconds (See recommend reflow) 11. Storage environment Temperature: 0°C~35°C; -40°C ~ 105°C (after PCB) Humidity Range: 50% ~ 70% RH 12. Use components within 12 months. If 12 months or more have elapsed, check solderability before use. LEAD -FREE HEAT ENDURANCE TEST LEAD -FREE RECOMMENDED REFLOW RELIABILITY TEST Transko Electronics, Inc reserves the right to make changes to the product (s), service (s), and specification (s) described herein without notice. See “Terms of Sale” for details on our website.