TPRH10D40F TRANSKO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Rev 1: 04 -27 -2018 Power Inductor SMD (10.10 X 10.0 X 3.8 mm)

FEATURES

  • Magnetic shielded
  • Halogen Free RoHS compliant SPECIFICATION DC Resistance Rated DC Current (A) Typ. Part No. Inductance (µH) Marking Max. (mΩ ) TPRH10D40F -1R5_ 1.5 1R5 8.1 10.0 6.50 TPRH10D40F -2R2_ 2.2 2R2 10.0 8.00 6.20 TPRH10D40F -2R5_ 2.5 2R5 10.5 7.50 6.10 TPRH10D40F -3R3_ 3.3 3R3 13.0 6.10 5.60 TPRH10D40F -4R7_ 4.7 4R7 22.0 5.70 5.40 TPRH10D40F -5R2_ 5.2 5R2 25.0 5.50 5.40 TPRH10D40F -7R0_ 7.0 7R0 27.0 4.80 4.50 TPRH10D40F -100_ 10 100 35.0 4.40 3.80 TPRH10D40F -150_ 15 150 50.0 3.60 3.10 TPRH10D40F -220_ 22 220 73.0 2.90 2.50 TPRH10D40F -330_ 33 330 93.0 2.30 2.20 TPRH10D40F -470_ 47 470 128 2.10 1.90 TPRH10D40F -680_ 68 680 213 1.50 1.42 TPRH10D40F -101_ 100 101 304 1.35 1.25 TPRH10D40F -151_ 150 151 506 1.15 0.85 TPRH10D40F -221_ 220 221 756 0.92 0.70 TPRH10D40F -331_ 330 331 1090 0.70 0.52
  • Measurement frequency of Inductance value : at 100KHz, 0.25V
  • Test equipment: CH1062A / CH1320
  • Inductance tolerance: Letter at end of part number: N = ±30% ; M = ±20% SOLDER PATTERN SCHEMATIC A B C D E F DIMENSION

Rev 1: 04 -27 -2018 LEAD -FREE HEAT ENDURANCE TEST LEAD -FREE RECOMMENDED REFLOW REEL DIMENSIONS (1000 pcs per reel) mm W1 24.00±0.3 I 1.75±0.1 F 11.5±0.1 P0 4.00±0.1 G 2.00±0.1 P1 16.00±0.1 C 10.50±0.1 t0 0.35±0.05 D 10.50±0.1 H 4.3±0.1 mm W 330±1.5 D 21.5+0.5/-0 C 13+0.5/-0.2 T1 24.5+0.5/-0 N 100±1.5 T2 29.5±0.4 E 2.00±0.5

Rev 1: 04 -27 -2018 1.Operating temperature range -40 TO + 125°C (Includes temperature when the coil is heated) 2. External appearance On visual inspection, the coil has no external defects. 3. Terminal strength After soldering. Between copper plate and terminals of coil. Push in two directions of X.Y withstanding at below conditions. Terminal should not peel off. (refer to figure at right) 5.0N 60 sec. 4. Insulating resistance Over 100MΩ at 100V D.C. between coil and core. 5. Dielectric strength No dielectric breakdown at 100V D.C. for 1 minute between coil and core. 6. Temperature characteristics Inductance coefficient (0~2,000)x10 -6 /°C ( -25~+80°C) inductance deviation within ±5.0%, after 96 hours 7. Humidity characteristics (Moisture Resistance) Inductance deviation within ±5%, after 96 hours in 90~95% relative humidity at 40 ±2°C and 1 hour drying under normal condition. 8. Vibration resistance Inductance deviation within ±5%, after vibration for 1 hour. In each of three orientations at sweep vibration (10~55~10 Hz) with 1.5mm P -P amplitudes. 9. Shock resistance Inductance deviation within ±5%, after being dropped once with 981m/s 2 (100G) shock attitude upon a rubber block method shock testing machine, in three different orientations. 10. Resistance to Soldering Heat: 260°C, 10 seconds (See recommended reflow) 11. Storage environment Temperature: 0°C~35°C; -40°C~125°C (after mounting on PCB) Humidity Range: 50% ~ 70% RH 12. Use components within 12 months. If 12 months or more have elapsed, check solderability before use. RELIABILITY TEST