DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

FENG-JUI TECHNOLOGY CO., LTD S MD POWER INDUCTOR-RoHS Your Perfect Inductor REV.1801 TPRH0705 TYPE

  • FEATURE 1. Low core loss for high frequency power application 2. Large terminal surface
  • Applications 1. Hard Disk drives, and other electronic equipment
  • Shape and Dimension ●Schematics and Land Patterns(mm)
  • Specification Part Number L(uH) DCR(Ω Max) Rated Current(A) (Max) TPRH0705-1R0N 1.0±30% 0.0110 7.60 TPRH0705-2R2N 2.2±30% 0.0190 6.60 TPRH0705-3R3N 3.3±30% 0.0218 5.80 TPRH0705-4R7N 4.7±30% 0.0245 5.20 TPRH0705-6R8N 6.8±30% 0.0368 4.70 TPRH0705-100M 10±20% 0.0455 4.10 TPRH0705-150M 15±20% 0.0684 3.10 TPRH0705-220M 22±20% 0.0883 2.70 TPRH0705-330M 33±20% 0.1205 1.90 TPRH0705-470M 47±20% 0.1657 1.70 TPRH0705-680M 68±20% 0.2625 1.50 TPRH0705-101M 100±20% 0.3605 1.20 TPRH0705-151M 150±20% 0.5820 0.90 TPRH0705-221M 220±20% 0.7540 0.70 TPRH0705-331M 330±20% 1.1440 0.65 TPRH0705-471M 470±20% 1.8040 0.60 TPRH0705-102M 1000±20% 4.3000 0.30 2.10REF 7.60REF 1.30REF 2.60REF

FENG-JUI TECHNOLOGY CO., LTD S MD POWER INDUCTOR-RoHS Your Perfect Inductor REV.1801 Note1. Measurement frequency of Inductance value : 100KHz, 0.25V Note2. Measurement ambient temperature of L, DCR and IDC : at 25℃ Note3. The rated current indicates the current when the inductance decreases to 70% over of it’s nominal value or D.C. current when the temperature rising Δt=40℃ lower, whichever is lower Note4. Inductance tolerance: M: ±20%, N: ±30% Note5. Packing: Taping ; Quantity: 900pcs/reel

FENG-JUI TECHNOLOGY CO., LTD S MD POWER INDUCTOR-RoHS Your Perfect Inductor REV.1801 GENERAL CHARACTERISTICS 1. Operating temperature range: -40 TO + 105℃(Includes temperature when the coil is heated) 2. External appearance: On visual inspection, the coil has no external defects. 3. Terminal strength: After soldering. Between copper plate and terminals of coil. Push in two directions of X.Y withstanding at below conditions. Terminal should not peel off. (refer to figure at right) 5. 0N 60 sec. 4. Insulating resistance: Over 100MΩ at 100V D.C. between coil and core. 5. Dielectric strength: No dielectric breakdown at 100V D.C. for 1 minute between coil and core. 6. Temperature characteristics: Inductance coefficient (0~2,000)x10-6/℃(-25~+80℃). 7. Humidity characteristics(Moisture Resistance): Inductance deviation within ±5%, after 96 hours in 90~95% relative humidity at 40 ±2℃and 1 hour drying under normal condition. 8. Vibration resistance: Inductance deviation within ±5%, after vibration for 1 hour. In each of three orientations at sweep vibration (10~55~10 Hz) with 1.5mm P-P amplitudes. 9. Shock resistance: Inductance deviation within ±5%, after being dropped once with 981m/s2 (100G) shock attitude upon a rubber block method shock testing machine, in three different orientations. 10. Resistance to Soldering Heat: 260℃, 10 seconds(See attached recommend reflow) 11. Storage environment: Storage condition: Temperature Range: 10℃ ~ 35℃ (Generally: 21℃ ~ 31℃) , Humidity Range: 50% ~ 80% RH (Generally: 65% ~ 75%) ; Transportation condition: Temperature Range: -35℃ ~ 85℃ , Humidity Range: 50% ~ 95% RH 12. Use components within 12 months. If 12 months or more have elapsed, check solderability before use. 13. Reflow profile recommend: 260 ℃ 230 ℃ 300 250 200 150 100 T( ℃ ) T(s 300240180120600 Lead-free heat endurance test 245 ℃ Peak 230 ℃ 170 ± 10℃ ,6 0-120S 300 250 200 150 100 T( ℃ ) T(s) 300240180120600 Lead-free the recom m ended refl ow condi ti on