TPOS3316F TRANSKO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Rev 1: 05-29-2018

FEATURES

  • Magnetic shielded • Halogen Free RoHS compliant
  • Low DCR Power Inductor SMD (13.0 X 9.5 X 5.21 mm) Part No. Inductance (μH) Tolerance (%) DC Resistance (Ω) Max. Rated DC Current (A) Typ. TPOS3316F-1R0M 1.0 ±20% 0.021 5.00 TPOS3316F-1R5M 1.5 ±20% 0.022 4.50 TPOS3316F-2R2M 2.2 ±20% 0.032 3.80 TPOS3316F-3R3M 3.3 ±20% 0.039 3.30 TPOS3316F-4R7M 4.7 ±20% 0.054 2.70 TPOS3316F-6R8M 6.8 ±20% 0.075 2.20 TPOS3316F-100M 10 ±20% 0.101 2.00 TPOS3316F-150M 15 ±20% 0.150 1.50 TPOS3316F-220M 22 ±20% 0.207 1.30 TPOS3316F-330M 33 ±20% 0.334 1.10 TPOS3316F-470M 47 ±20% 0.472 0.80 TPOS3316F-680M 68 ±20% 0.660 0.70 TPOS3316F-101M 100 ±20% 1.110 0.60 TPOS3316F-151M 150 ±20% 1.550 0.50 TPOS3316F-221M 220 ±20% 2.000 0.37 TPOS3316F-102M 1000 ±20% 8.300 0.17 SCHEMATIC A B C D E G H I F SPECIFICATION
  • Measurement frequency of Inductance value : at 100KHz, 1V
  • Test equipment: CH1062A / CH1320A / CH16502 DIMENSIONS SOLDER PATTERN

Rev 1: 05-29-2018 REEL DIMENSIONS (1000 pcs per reel) W D C T1 N T2 E W1 I F P0 G P1 C t0 D H

Rev 1: 05-29-2018 RELIABILITY TEST 1.Operating temperature range -40 TO + 105°C (Includes temperature when the coil is heated) 2. External appearance On visual inspection, the coil has no external defects. 3. Terminal strength After soldering. Between copper plate and terminals of coil. Push in two directions of X.Y withstanding at below conditions. Terminal should not peel off. (refer to figure at right) 5.0N 60 sec. 4. Insulating resistance Over 100MΩ at 100V D.C. between coil and core. 5. Dielectric strength No dielectric breakdown at 100V D.C. for 1 minute between coil and core. 6. Temperature characteristics Inductance coefficient (0~2,000)x10-6 /°C (-25~+80°C) inductance deviation within ±5.0%, after 96 hours 7. Humidity characteristics (Moisture Resistance) Inductance deviation within ±5%, after 96 hours in 90~95% relative humidity at 40 ±2°C and 1 hour drying under normal condition. 8. Vibration resistance Inductance deviation within ±5%, after vibration for 1 hour. In each of three orientations at sweep vibration (10~55~10 Hz) with 1.5mm P-P amplitudes. 9. Shock resistance Inductance deviation within ±5%, after being dropped once with 981m/s 2 (100G) shock attitude upon a rubber block method shock testing machine, in three different orientations. 10. Resistance to Soldering Heat: 260°C, 10 seconds (See recommend reflow) 11. Storage environment Temperature: 0°C~35°C; -40°C~105°C (after mounting on PCB) Humidity Range: 50% ~ 70% RH 12. Use components within 12 months. If 12 months or more have elapsed, check solderability before use. Transko Electronics, Inc reserves the right to make changes to the product (s), service (s), and specification (s) described herein without notice. See “Terms of Sale” for details on our website. LEAD-FREE HEAT ENDURANCE TEST LEAD-FREE RECOMMENDED REFLOW