Datasheet search site | www.alldatasheet.com
Document overview
- PDF pages: 4
Technical content
5IFQSPEVDUJOUIJTDBUBMPHJTOPUSFDPNNFOEFEGPSOFXEFTJHO Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20210217 (1/4) transpondercoil_automotive_tplc55_en.fm INDUCTORS Transponder coils TPLC series (for automotive) TPLC553030 type
FEATURES
Transponder coils that ensure high reliability suitable for automotive applications. Ensures high reliability suitable for automotive applications by adopting higher heat resistance wire and welding wire connection. Operating temperature: –40 to +125°C (including self-temperature rise) Compliant with AEC-Q200 APPLICATION Tire-pressure monitoring system (TPMS) PART NUMBER CONSTRUCTION CHARACTERISTICS SPECIFICATION TABLE This inductance value is an example of the current commercial product.If a different inductance is needed, please contact us. TEMPERATURE RANGE, PACKAGE QUANTITY Operating temperature range includes self-temperature rise. TPLC 553030 - 592 H Series name L×W×T dimensions Inductance Inductance tolerance (mm) (mH) (%) 553030 5.5×3.0×3.0 L Q Measurement frequency (kHz) DC resistance () Part No. (mH) Tolerance min. max. 5.89 ±3% 35 125 70 TPLC553030-592H Operating temperature range Storage temperature range Package quantity –40 to +125 °C –40 to +125 °C 2500 pcs/reel REACH SVHC-FreeRoHS AEC-Q200
5IFQSPEVDUJOUIJTDBUBMPHJTOPUSFDPNNFOEFEGPSOFXEFTJHO Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20210217 (2/4) transpondercoil_automotive_tplc55_en.fm INDUCTORS TPLC553030 type L FREQUENCY CHARACTERISTICS Q FREQUENCY CHARACTERISTICS 10 100 1000 Inductance (mH) Frequency (kHz) 100 1000 Frequency (kHz) Q
5IFQSPEVDUJOUIJTDBUBMPHJTOPUSFDPNNFOEFEGPSOFXEFTJHO Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20210217 (3/4) transpondercoil_automotive_tplc55_en.fm INDUCTORS TPLC553030 type SHAPE & DIMENSIONS RECOMMENDED LAND PATTERN PACKAGING STYLE REEL DIMENSIONS TAPE DIMENSIONS Dimensions in mm 5.5max. 3.0max. 3.0max. 0.7 1.9 2.3 3.7 6.2 Dimensions in mm ø13.0±0.5 ø21.0±0.8 2.0±0.5 ø329+0.5/–1.5 (1.0) Dimensions in mm ø100±1.0 2.0 17.4±1.0 21.4±1.0 K B 1.75±0.1 16.0±0.3 4.0±0.12.0±0.1 8.0±0.1A 7.5±0.11.5 +0.1 Dimensions in mm Sprocket hole Cavity 0.3 Type A B K TPLC553030 3.1 5.6 3.1 Dimensions in mm 160min. Taping 200min. 300min.Drawing direction
5IFQSPEVDUJOUIJTDBUBMPHJTOPUSFDPNNFOEFEGPSOFXEFTJHO Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20210217 (4/4) transpondercoil_automotive_tplc55_en.fm INDUCTORS REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using these products. The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set therm al design. Use a wrist band to discharge static electricity in your body through the grounding wire. Do not expose the products to magnets or magnetic fields. Do not use for a purpose outside of the contents regulated in the delivery specifications. If an ultrasonic process is used, thoroughly check the condition setting in order to prevent disconnection. Do not clean the products with solvents. If a potting resin or a moisture-proof coat containing a solvent such as acetone, tolu ene or xylene is used, consult with us in advance. The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us. (1) Aerospace/Aviation equipment (2) Transportation equipment (electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipment (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment. REMINDERS