TPIPU80 TOTAL-POWER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
80W Desk Top Switching Power Supplies For Industrial Equipment Description: Wide Input Voltage 90 to 260 VAC,47 to 63 Hz IEC-320-C14 Input Inlet Single Output Optional Output Connector (See appendix) Input Surge Current, Over Voltage And Over Load protection Power Factor Correction Output Voltage Protection(Crowbar Design) Splash proof Class I 2 year warranty Operating temperature -20~70 CB Features: The 80 series of AC/DC switching mode power supplies provide 80 Watts of continuous output power. All supplies are UL 94V-1 min compliant, include IEC-320-C14 input for worldwide applications. All models meet FCC Part-15 class B and CISPR-22 class B emission Limits and are designed to comply with UL/c-UL(UL 60950-1), TUV/GS(EN 60950-1) and new CE requirements. All units are 100% burned in and tested. Electrical Characteristics: Sym. Parameter Test Conditions Min. Typ. Max. Unit Iil 1.07 Irh Eff REG-i REG-o OVP OCP Ttr Thold Ts 0.3 1 2 Vp-p Ilk Iih 0.5 Irl 0.5 1 TC -0.04 0.04 Vin=90 to 260 VAC Io=Full load, Vin=115VAC Vin=230VAC W V A A A A A Input Voltage Output Power Range Efficiency Line Regulation Load Regulation Over Voltage Protection Time of Transient Response Hold-Up Time Safety Ground Leakage Current Temperature Coefficient S mA mS 260 90 See rating Chart 42 45 88 92 0.750.5 0.5 Low Line Inrush Current VAC Hz Vin fin Po Vo Io 132 150 110 112 High Line Inrush Current Input Frequency Output Voltage Range Output Current Range Input Current (Low Line) Input Current (High Line) Io=Full load, Vin=230VAC Io=Full load, 25 C,Cool start, Vin=115VAC Io=Full load, 25 C,Cool start, Vin=230VAC Io=Full load, Vin=110VAC Io=Full load Over Current Protection Io=Full load to Half Load, Vin=100VAC Start Up Time Io=Full load, Vin=100VAC Ripple & Noise (Peak to Peak) Full load, Vin=90VAC 1 Io=Full load, Vin=240VAC See rating Chart mS16 %/ C Io=Full load, Vin=230VAC All output Operating Voltage Environmental : Hr Relative Humidity 5 95 % Toper Operating Temperature Tstg Storage Temperature Pd 85 -40 -20 Sym. Parameter Min. Typ. Max. Unit Derate linearly from 100% load at 40 C to 50% load at 70 C Test Conditions C C PF Power Factor Correction Io=Full load, Vin=90~260VAC 0.95 0.97 1.0 Safety Approvals : Hrs MTBF Operating Temperature at 25 C, Calculated per MIL-HDBK-217F 0.1 M C
80W Desk Top Switching Power Supplies For Industrial Equipment Output Voltage And Current Rating Chart (Single Output) : Note: 1. Dimensions are shown in inches or mm. 2. Weight: 600-700gs approx. 3. Optional output connector: See page Appendix. Mechanical Specifications: Safety Specifications: Parameter Test Conditions Min. Typ. Max. Unit Dielectric Withstanding Voltage for Primary to secondary Primary to secondary 4242 VDC Primary to ground 2121 Test Voltage=500VDC 50 M Vin=220VAC B CLASS Sym. Vps Vpg Ris CISPR FCC Isolation Resistance EMI requirements for CISPR-22 Vin=110VAC VDC B CLASS Dielectric Withstanding Voltage for Primary to Ground EMI requirements for FCC PART-15 Model Number Output Voltage Output Current Total Regulation TPIPU80-105 11 ~ 13 VDC 7.27 ~ 6.15 A 5% 80W TPIPU80-106 13 ~ 16 VDC 6.15 ~ 5.00 A 5% 80W TPIPU80-107 16 ~ 21 VDC 5.00 ~ 3.80 A 5% 80W TPIPU80-108 21 ~ 27 VDC 3.80 ~ 2.96 A 5% 80W TPIPU80-109 27 ~ 33 VDC 2.96 ~ 2.42 A 5% 80W TPIPU80-110 33 ~ 40 VDC 2.42 ~ 2.00 A 5% 80W TPIPU80-111 40 ~ 48 VDC 2.00 ~ 1.66 A 5% 80W Out Power Maximum Mark " " means " PSE approval " The output voltage under 30V had been approved by TUV/PSE