TPIPU20B TOTAL-POWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Sym. Parameter Test Conditions Min. Typ. Max. Unit Vin Input Voltage Operating Voltage 90 264 VAC fin Input Frequency 47 63 Hz Po Output Power Range Vin=90 to 264VAC 0 20 W Vo Output Voltage Range See rating chart V Io Output Current Range See rating chart A Iil Input Current (Low Line) Io=Full load, Vin=115VAC 0.4 A Iih Input Current (High Line) Io=Full load, Vin=230VAC 0.25 A Irl Low Line Inrush Current Io=Full load, 25c, Cool start, Vin=115VAC 12 15 A Irh High Line Inrush Current Io=Full load, 25c, Cool start, Vin=230VAC 26 30 A Eff Efficiency Io=Full Load, Vin=230VAC 75 85 95 % REG-i Line Regulation Io=Full Load 0.5 1 % REG-o Load Regulation Vin=230VAC 1 3 5 % OVP Over Voltage Protection Nil % OCP Over Current Protection 110 150 % Ttr Time of Transient Response Io=Full Load to Half Load, Vin=100VAC 4 mS Thold Hold-Up Time Io=Full Load, Vin=110VAC 12 14 16 mS Ts Start Up Time Io=Full Load, Vin=100VAC 0.25 0.5 S Vrn Ripple & Noise (Peak to Peak) Full Load, Vin=90VAC 0.5 1 % Ilk Safety Ground Leakage Current Io=Full Load, Vin=240VAC 0.15 0.25 mA TC Temperature Coefficient All output -0.04 0.04 %/c Pno No-Load Power Consumption No load, Vin=240VAC 0 0.4 0.5 W TPIPU20B SERIES 20W Desk Top Switching Power Supplies For Industrial Equipment Description: Electrical Characteristics: Features: Safety Approvals: Wide Input Voltage 90 to 264 VAC,47 to 63 Hz IEC-320-C8 Input Inlet Optional Output Connector (See appendix) Single Output Splash proof Class II CEC and Energy Star compliance Approved as Limited Power Source (LPS). 3 year warranty Operating temperature -20~70 The 20B series of AC/DC switching mode power supplies provide 20 Watts of continuous output power and is well-suited for a variety of applications. All supplies are UL 94V-1 min compliant. All models meet FCC Part-15 class B and CISPR-22 class B emission Limits and are designed to comply with UL/c-UL(UL 60950-1), TUV/GS (EN 60950-1) and new CE requirements. All units are 100% burned in and tested. Environmental : Hr 5 0.3 M Hrs Toper MTBF Operating Temperature Tstg Storage Temperature Pd 85 -40 -20 Sym. Parameter Min. Typ. Max. Unit Relative Humidity Operating Temperature at 25 C, Calculated per MIL-HDBK-217F Derate linearly from 100% load at 40 C to 50% load at 70 C Test Conditions C C CB S E P C

20W Desk Top Switching Power Supplies For Industrial Equipment Safety Specifications: Model Number Output Voltage Output Current Total Regulation Max. Output Power TPIPU20B-102 5 ~ 6 VDC 3.00 ~ 2.50 A 5% 15W TPIPU20B-105 11 ~ 13 VDC 1.81 ~ 1.53 A 4% 20W TPIPU20B-106 13 ~ 16 VDC 1.53 ~ 1.25 A 4% 20W TPIPU20B-108 21 ~ 27 VDC 0.95 ~ 0.74 A 3% 20W TPIPU20B-109 27 ~ 33 VDC 0.74 ~ 0.60 A 3% 20W TPIPU20B-111 40 ~ 48 VDC 0.50 ~ 0.41 A 3% 20W Note: 1. Dimensions are shown in mm. 2. Weight: 170gs approx. 3. Optional output connector: See page Appendix. Output Voltage And Current Rating Chart ( Single Output ) : Parameter Test Conditions Min. Typ. Max. Unit Dielectric Withstanding Voltage for Primary to secondary Primary to secondary 4242 VDC Test Voltage=500VDC 50 M Vin=220VAC B CLASS Sym. Vps Ris CISPR FCC Isolation Resistance EMI requirements for CISPR-22 Vin=110VAC B CLASSEMI requirements for FCC PART-15 Mechanical Specifications : The total regulation on each model is required to use AWG#18/4FT output cable. ① The regulation will be changed by modified output cable. The output voltage under 30V had been approved by TUV/PSE.