TPIPU16C TOTAL-POWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

15W Desk Top Switching Power Supplies For Industrial Equipment The 16C series of AC/DC switching mode power supplies provide 15 Watts of continuous output power and is well-suited for a variety of applications. All supplies are UL 94V-1 min compliant. All model meet FCC Part-15 class B and CISPR-22 class B emission Limits and are designed to comply with UL/c-UL(UL 60950-1), TUV/GS(EN 60950-1) and new CE requirements. All units are 100% burned-in and tested. Features: Wide Input Voltage 90 to 264 VAC,47 to 63 Hz IEC-320-C6 Input Inlet Optional Output Connector (See appendix) Single Output Splash proof Class I 2 year warranty Operating temperature -20~70 Description: Environmental : Hr Relative Humidity 5 95 % Toper Operating Temperature Tstg Storage Temperature Pd 85 -40 -20 Sym. Parameter Min. Typ. Max. Unit Derate linearly from 100% load at 40 C to 50% load at 70 C Test Conditions C C Sym. Parameter Test Conditions Min. Typ. Max. Unit Vin Input Voltage Operating Voltage 90 264 VAC fin Input Frequency 47 63 Hz Po Output Power Range Vin=90 to 264VAC 15 W Vo Output Voltage Range See rating chart V Io Output Current Range See rating chart A Iil Input Current (Low Line) Io=Full load, Vin=115VAC 0.4 A Iih Input Current (High Line) Io=Full load, Vin=230VAC 0.26 A Irl Low Line Inrush Current Io=Full load, 25c, Cool start, Vin=115VAC 12 15 A Irh High Line Inrush Current Io=Full load, 25c, Cool start, Vin=230VAC 26 30 A Eff Efficiency Io=Full Load, Vin=230VAC 72 85 % REG-i Line Regulation Io=Full Load 0.5 1 % REG-o Load Regulation Vin=230VAC 3 10 % OVP Over Voltage Protection Nil % OCP Over Current Protection Nil.But,Output protected to short circut conditions % Ttr Time of Transient Response Io=Full Load to Half Load, Vin=100VAC 4 mS Thold Hold-Up Time Io=Full Load, Vin=110VAC 5 mS Ts Start Up Time Io=Full Load, Vin=100VAC 0.3 1 2 S Vrn Ripple & Noise (Peak to Peak) Full Load, Vin=90VAC 0.5 1 % Ilk Safety Ground Leakage Current Io=Full Load, Vin=240VAC 0.5 0.75 mA TC Temperature Coefficient All output -0.04 0.04 %/c Pno No-Load Power Consumption No load, Vin=240VAC 0 0.4 0.5 W Electrical Characteristics: Note: The Ripple & Noise which is under 3.3VCD at 2% max Safety Approvals: CB S E P S&E Hrs MTBF Operating Temperature at 25 C, Calculated per MIL-HDBK-217F 0.1 M C

15W Desk Top Switching Power Supplies For Industrial Equipment Safety Specifications: Model Number Output Voltage Output Current Total Regulation Maximum Output Power TPIPU16C-101 03 ~ 05 VDC 2.50 A max 7% 12W TPIPU16C-102 05 ~ 06 VDC 2.50 ~ 2.00 A 5% 12W TPIPU16C-103 06 ~ 08 VDC 2.00 ~ 1.50 A 5% 12W TPIPU16C-104 08 ~ 11 VDC 1.87 ~ 1.36 A 5% 15W TPIIPU16C-105 11 ~ 13 VDC 1.36 ~ 1.15 A 5% 15W TPIPU16C-106 13 ~ 16 VDC 1.15 ~ 0.94 A 5% 15W TPIPU16C-107 16 ~ 21 VDC 0.94 ~ 0.72 A 5% 15W TPIPU16C-108 21 ~ 27 VDC 0.72 ~ 0.55 A 5% 15W TPIPU16C-109 27 ~ 33 VDC 0.55 ~ 0.45 A 5% 15W TPIPU16C-110 33 ~ 40 VDC 0.45 ~ 0.37 A 3% 15W TPIPU16C-111 40 ~ 48 VDC 0.37 ~ 0.31 A 3% 15W Mechanical Specifications : Note: 1. Dimensions are shown in mm. 2. Weight: 165gs approx. 3. Optional output connector: See page Appendix. Output Voltage And Current Rating Chart ( Single Output ) : Parameter Test Conditions Min. Typ. Max. Unit Dielectric Withstanding Voltage for Primary to secondary Primary to secondary 4242 VDC Primary to ground 2121 Test Voltage=500VDC 50 M Vin=220VAC B CLASS Sym. Vps Vpg Ris CISPR FCC Isolation Resistance EMI requirements for CISPR-22 Vin=110VAC VDC B CLASS Dielectric Withstanding Voltage for Primary to Ground EMI requirements for FCC PART-15 The output voltage under 30V had been approved by TUV/PSE. *Mark " " means approved by CEC level V.