DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

AC/DC EXTERNAL DESKTOP ADAPTER UNIVERSAL INPUT SINGLE OUTPUT 45-51 WATTS SWITCHING POWER SUPPLIES TPES51 SERIES FEATURES: „ ACCOMMODATE UNIVERSAL AC SOURCE „ LOW PROFILE & HIGH POWER DENSITY „ DESKTOP IEC320-2P AC RECEPTACLE „ MEET UNIVERSAL SAFETY STANDARDS „ EMI EN55022 / FCC CLASS B „ CE MARKING COMPLIANCE GENERAL SPECIFICATION Efficiency: 85% typical. Switching Frequency: Approximate 90K Hz. Circuit Topology: Fixed Frequency Flyback circuit. Transient Response: Output voltage returns in less than 3mS following a 25% load change. Safety Standard: Meet UL60950-1/ EN60950-1 Class II. Power Density: 4.67Watts / Cubic Inch. Operating Temperature: 0 to +25/35/40°C without derating. (various with output voltage) Storage Temperature: -20 to +85°C. Temperature Coefficient: 0.04% /°C. Cooling: Free air convection. Construction: Impact resistant thermo- plastic case. Desktop Format. NOTE: (1) All measurements are at nominal input, full load, and +25°C unless otherwise specified. (2) Load regulation is measured at 115Vac or 230Vac in percentage to indicate the change in output voltage as the load is varie d from half load to full load (±%). (3) The exact obtainable load regulation depends upon the output load current & cord selected. Upper data are for 6 ft.(2 m)cord AWG#18 wires. (4) Due to requests in market and advances in technology, specifications subject to change without notice. OUTPUT SPECIFICATION Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Wattage: 45-51Watt typical. Output Connector & Cord: Optional. Output LED Indicator: Installed. Line Regulation: 0.1% typical. Load Regulation: ±1.5-3.0% typical. Noise & Ripple: 1.0% typical peak to peak. OVP: Built-in Zener diode clamping. Over Current Protection (OCP): Installed. Current limiting can be set precisely as per request. Overload Protection (OLP): Fully protected against output overload or short circuit. Typical set at 130% max. load. Consult the factory for special OLP setting. SPECIFICATION INPUT SPECIFICATION Input Voltage: 90-264Vac typical. Input Connector: IEC320-2P DT8 AC inlet receptacle. Input Frequency: 47-63Hz. Inrush Current: 30A @240Vac typical. Input Current: 1.0A @115Vac & 0.5A @230Vac typical. Dielectric Withstand: Meet IEC60950-1. EMI: Meet EN55022 / FCC Class B. Hold-up Time: 8mS @115Vac typical. 50mS @230Vac typical. Over Temp. Protection: By NTC. For the details of safety approval, please consult the factory. Total Power International, Inc. Toll Free: 877-646-0900(US) PH# 978-453-7272 www.total-power.com Total Power International, Inc.

MODEL NO. DESCRIPTION: TPES51 - X X X Y Y OUTPUT CURRENT OUTPUT VOLTAGE SERIES NAME (Total Power External Switcher): About 51W. OUTPUT VOLTAGE/CURRENT RATINGS CHART DEFINED OUTPUT VOLTAGE(Vdc) OUTPUT VOLTAGE(Vdc) / CURRENT (A) 9.0Vdc ≤ Any Voltage ≤ 15.0Vdc 15.0Vdc <Any Voltage ≤ 30.0Vdc Note: Refer to the upper Chart or specify the V/A ratings and consult factory for the exact Model No. SINGLE OUTPUT (Model No. for example) MODEL NO. O/P VOLTAGE O/P CURRENT TPES51-05080 5.0Vdc 8.0A TPES51-09050 9.0Vdc 5.0A TPES51-12040 12.0Vdc 4.0A TPES51-15034 15.0Vdc 3.4A TPES51-16031 16.0Vdc 3.1A TPES51-18028 18.0Vdc 2.8A TPES51-19630 19.6Vdc 3.0A TPES51-24021 24.0Vdc 2.1A TPES51-30017 30.0Vdc 1.7A TPES51-48010 48.0Vdc 1.0A TPES51-58007 58.0Vdc 0.7A MECHANICAL DIMENSIONS: MM [INCHES] WEIGHT: 185.0g (6.53 Oz.) Total Power International, Inc. Toll Free: 877-646-0900(US) PH# 978-453-7272 www.total-power.com Total Power International, Inc.