TPES09 TOTAL-POWER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
AC TO DC EXTERNAL WALLMOUNT ADAPTOR 2-BLADE USA OR EURO-STECKER AC PLUG SINGLE OUTPUT 9-10 WATTS SWITCHING POWER SUPPLIES TPES09 SERIES FEATURES: VERY SMALL & COMPACT IN SIZE 2-BLADE USA OR EURO-STECKER AC PLUG EMI MEET EN55022 / FCC CLASS B MEET UNIVERSAL SAFETY STANDARDS CE MARKING COMPLIANCE GENERAL SPECIFICATION Efficiency: 75% typical. Switching Frequency: Fixed 100K Hz. Circuit Topology: Fixed Frequency flyback circuit. Transient Response: Output voltage returns in less than 3 mS following a 25% load change. Safety Standard: UL1950 / EN60950 Class II. Power Density: 1.73 Watts / Cubic Inch. Operating Temperature: 0 to +40°C. Storage Temperature: -20 to +85°C. Temperature Coefficient: 0.04%/°C. Cooling: Free air convection. Construction: Impact resistant thermo-plastic e nclosure case. Wallmount Format. Notes: (1) All measurements are at nominal input, full load, and +25°C unless otherwise specified. (2) Load regulation is measured at 115Vac or 230Vac in percentage to indicate the change in output voltage as the load is varied from half load to full load (±%). (3) The exact obtainable load regulation depends upon the output cord selected and load current. Upper data are for 6 ft. (2 m) cord AWG#18 wires. OUTPUT SPECIFICATION Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Wattage: 9 ~ 10 Watts typical. Output Connector: Optional. Line Regulation: 0.1% typical. Load Regulation: ±1.5 ~3.0% typical. Noise & Ripple: Typ. 1.0% peak to peak. OVP: Built-in, Zener Diode clamping. Overload Protection: Typ. 125 ~ 150% of max. power overrange or short circuit, power foldback & self-recovering. SPECIFICATION INPUT SPECIFICATION Input Voltage: 90-132Vac or 90-264Vac. Input Connector: 2-blade USA WM1 or E uro-Stecker WM3 AC plug. Input Frequency: 47-63Hz. Inrush Current: Typical 34A @230Vac. 21A @ 230 Vac by adding the thermister. Input Current: 0.22A@115Vac. / 0.1A @ 230Vac. Dielectric Withstand: Meet IEC950. EMI: Meet EN55022 / FCC Class B. Hold-up Time: 10mS @115Vac or 40m S @230Vac typical. For the details of safety approval, please consult the factory.
MODEL NO. DESCRIPTION: TPES09 - X X X Y Y Y – S ( 1 ) ( 1) IF INPUT VOLTAGE 90-132Vac I NPUT AC PLUG: [1]WM1,[3]WM3. O UTPUT CURRENT O UTPUT VOLTAGE SE RIES NAME (Total Power External Switcher): About 9W OUTPUT VOLTAGE / CURRENT RATINGS CHART DEFINED OUTPUT VOLTAGE (Vdc) OUTPUT VOLTAGE (Vdc)/CURRENT (A) 5.0Vdc ≤ Any Voltage ≤ 15.0Vdc Note: Refer to the upper Chart or consult factory for the exact Model No. and V/A ratings. SINGLE OUTPUT (Model No. for example.) MODEL NO. AC INPUT AC PLUG O/P VOLTAGE O/P CURRENT TPES09-050160-1(1) 90-132Vac WM1 5.0V 1.60A TPES09-050180-1 90-264Vac WM1 5.0V 1.80A TPES09-050180-1(1) 90-132Vac WM1 5.0V 1.80A TPES09-050180-3 90-264Vac WM3 5.0V 1.80A TPES09-050200-1 90-264Vac WM1 5.0V 2.00A TPES09-050200-3 90-264Vac WM3 5.0V 2.00A TPES09-120075-1 90-264Vac WM1 12.0V 0.75A TPES09-120075-1(1) 90-132Vac WM1 12.0V 0.75A TPES09-120075-3 90-264Vac WM3 12.0V 0.75A TPES09-150060-1 90-264Vac WM1 15.0V 0.60A TPES09-150060-1(1) 90-132Vac WM1 15.0V 0.60A TPES09-150060-3 90-264Vac WM3 15.0V 0.60A MECHANICAL DIMENSIONS: MM [INCHES] W EIGHT: 113.0g (4.0 Oz)