TPD TTELEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

IRC reserves the right to make changes in product specification without notice or liability. All information is subject to IRC’s own data and is considered accurate at time of going to print. A subsidiary of TTelectronics plcAdvanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com TPD Series Issue May 2012 Operation Characteristics

  • Fusing Temperature 235°C ± 15°C
  • Continuous Operation 55A at 135°C
  • One-Shot Non-Resettable Design
  • High Temperature DAP (Diallyl Phthalate) Case
  • Rugged Vibration Resistant Potted Construction
  • RoHS Compliant High Current Thermal Fuse Fusing Current Characteristic Value Resistance at 25°C ≤ 0.700mW Functioning Temperature 235°C ± 15°C Rated Current 55A Operating Temperature at Rated Current -40°C to 135°C Max Operating Temperature (0A) 175°C Lead Diameter 1.3mm (0.050”) Lead Spacing 15.2mm (0.600”) TPD Series 100 110 120 130 120 130 140 150 160 170 180 190 200 210 220 230 240 250 Pin Temperature (°C) Current (A) CONTINUOUS OPERATION ZONE FUSE ACTIVATION ZONE Short Term Operation Limit (24hrs Max) High Current Thermal Fuse TPD Series Fusing Temperature 235°C ± 15°C Continuous Operation 55A at 135°C One-Shot Non-Resettable Design High Temperature DAP Case Rugged Vibration Resistant Potted Construction RoHS Compliant Resistors Make Possible 10.14 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc www.ttelectronicsresistors.com All parts are Pb-free and comply with EU Directive 2011/65/EU (RoHS2) OBSOLETE

Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com High Current Thermal Fuse Physical Data Dimensional Tolerances (unless noted) are ± 0.010” (0.25mm) Date Code is “YYWW” where “YY” is the Y ear and “WW” is the Week Prefix TPD - 235C - 55A Thermal Protection Device (TPD) Fusing Temperature 235 degres Celsius Current Rating

55 Amps

For additional information or to discuss your specific requirements, please contact our Applications Team using the contact details below. Ordering Data Test Method Max Specification High Temperature Exposure MIL-STD-202G, Method 108A 500hrs at 150°C 20% ∆R & ≤ 0.700mW Fuse Open1 ≤ 250°C Thermal Shock MIL-STD-202G, Method 107G

300 Cycles -55°C to +165°C Fuse Open1 ≤ 250°C

Heavy Load 60A at 135°C for 24hrs Fuse Open1 ≤ 250°C Moisture/Humidity MIL-STD-202G, Method 106G Fuse Open1 ≤ 250°C Solderability J-STD-002 >95% Coverage Resistance to Solder Heat MIL-STD-202G, Method 210F 20% ∆R & ≤ 0.700mW Vibration MIL-STD-202G, Method 204 20% ∆R & ≤ 0.700mW Life/High Temperature Endurance MIL-STD-202G, Method 108A 55A at 135°C 20% ∆R & ≤ 0.700mW Mechanical Shock MIL-STD-202G, Method 213B 50G for 6ms performed 10X per axis 20% ∆R & ≤ 0.700mW Terminal Strength MIL-STD-202G, Method 211A 20% ∆R & ≤ 0.700mW Note1 : “Open” when resistance ≥ 100kW. Environmental Performance TPD Series Issue May 2012 Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com High Current Thermal Fuse Physical Data Dimensional Tolerances (unless noted) are ± 0.010” (0.25mm) Date Code is “YYWW” where “YY” is the Y ear and “WW” is the Week Prefix TPD - 235C - 55A Thermal Protection Device (TPD) Fusing Temperature 235 degres Celsius Current Rating For additional information or to discuss your specific requirements, please contact our Applications Team using the contact details below. Ordering Data Test Method Max Specification High Temperature Exposure MIL-STD-202G, Method 108A 500hrs at 150°C 20% ∆R & ≤ 0.700mW Fuse Open1 ≤ 250°C Thermal Shock MIL-STD-202G, Method 107G Heavy Load 60A at 135°C for 24hrs Fuse Open1 ≤ 250°C Moisture/Humidity MIL-STD-202G, Method 106G Fuse Open1 ≤ 250°C Solderability J-STD-002 >95% Coverage Resistance to Solder Heat MIL-STD-202G, Method 210F 20% ∆R & ≤ 0.700mW Vibration MIL-STD-202G, Method 204 20% ∆R & ≤ 0.700mW Life/High Temperature Endurance MIL-STD-202G, Method 108A 55A at 135°C 20% ∆R & ≤ 0.700mW Mechanical Shock MIL-STD-202G, Method 213B 50G for 6ms performed 10X per axis 20% ∆R & ≤ 0.700mW Terminal Strength MIL-STD-202G, Method 211A 20% ∆R & ≤ 0.700mW Note1 : “Open” when resistance ≥ 100kW. Environmental Performance Process Recommendations Wave solder 10s contact time (total) maximum 260°C maximum Two cycles maximum Hand solder Tip temperature 350°C maximum Contact time 5s maximum Permit cooling between soldering first & second terminal Make Possible 10.14 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc www.ttelectronicsresistors.com