TPCP8505 TOSHIBA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

TOSHIBA Transistor Silicon NPN Epitaxial Type (PCT Process) TPCP8505 High-Speed Switching Applications DC-DC Converter Applications

  • High DC current gain: hFE = 400 to 1000 (IC = 0.3 A)
  • Low collector-emitter saturation: VCE (sat) = 0.14 V (max)
  • High-speed switching: tf = 120 ns (typ.) Absolute Maximum Ratings (Ta = 25°C) Characteristic Symbol Rating Unit Collector-base voltage VCBO 100 V VCEX 80 Collector-emitter voltage VCEO 50 V Emitter-base voltage VEBO 7 V DC (Note 1) I C 3.0 Collector current Pulse (Note 1) I CP 5.0 A Base current IB 0.3 A t = 10s 3.0 Collector power dissipation (t = 10 s) DC PC (Note 2) 1.25 W Junction temperature Tj 150 °C Storage temperature range Tstg −55 to 150 °C Note 1: Ensure that the junction temperature does not exceed 150°C during use of this device. Note 2: Mounted on an FR4 board (glass epoxy, 1.6 mm thick, Cu area: 645 mm 2) Note 3: Using continuously under heavy loads (e.g. t he application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Unit: mm JEDEC ― JEITA ― TOSHIBA 2-3V1A Weight: 0.017 g (typ.) 0.33±0.05 0.28+0.1 -0.11 1.12+0.13 -0.12 2.4±0.1 0.475 0.65 2.8±0.1 A 0.05 M 2.9±0.1 0.8±0.05 0.17±0.02 B B0.05 M A S 0.025S 1.12+0.13 -0.12 0.28+0.1 -0.111.Collector 2.Collector 3.Collector 4.Base 5.Emitter 6.Collector 7.Collector 8.Collector

0.001 1 10000 1000 0.01 0.1 Ta = 100°C −55 0.001 0.1 0.01 0.1 Ta = −55°C 0.001 0.01 0.1 0.01 0.1 Ta = 100°C 0.4 1.2 1.6 2.5 3.0 −55 Ta = 100°C 25 Collector current I C (A) Base−emitter saturation voltage VBE (sat) (V) Collector−emitter voltage V CE (V) IC – VCE Collector current I C (A) Collector current I C (A) hFE – IC DC current gain h FE Collector current I C (A) VCE (sat) – IC Collector−emitter saturation voltage VCE (sat) (V) Collector current I C (A) VBE (sat) – IC Base−emitter voltage V BE (V) IC – VBE 0.8 1.6 2.0 2.4 0.5 2.5 3.0 Common emitter Ta = 25°C Single nonrepetitive pulse IB = 1 mA 2.0 1.0 1.20.4 0.5 2.0 1.0 0.8 Common emitter VCE = 2 V Single nonrepetitive pulse Common emitter β = 50 Single nonrepetitive pulse Common emitter β = 50 Single nonrepetitive pulse Common emitter VCE = 2 V Single nonrepetitive pulse 10 1 30 40 1.5 100 −55 100 1.5

Transient thermal impedance rth(j-a) (°C/W) rth – tw Pulse width t w (s) 1000 0.001 1000 0.01 0.1 10 100 100 1 ms* 10 ms* 100 μs* IC max (Pulse)* DC operation Ta = 25°C IC max (Continuous)* 100 ms* VCEO max Collector−emitter voltage V CE (V) Safe operating area 0.01 0.1 0.1 1 10 100 Collector current I C (A) 10 s* 10 μs* Curves apply only to limited areas of thermal resistance. Single nonrepetitive pulse Ta = 25°C Mounted on FR4 board (glass epoxy, 1.6 mm thick, Cu area: 645 mm2) *: Single nonrepetitive pulse Ta = 25°C Note that the curves for 100 ms, 10 s and DC operation will be different when the devices aren’t mounted on an FR4 board (glass epoxy, 1.6 mm thick, Cu area: 645 mm 2). These characteristic curves must be derated linearly with increase in temperature.

RESTRICTIONS ON PRODUCT USE 20070701-EN

  • The information contained herein is subject to change without notice.
  • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity an d vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA produc ts, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIB A products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconduct or Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.
  • The TOSHIBA products listed in this document are in tended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfuncti on or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage incl ude atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, et c.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk.
  • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations.
  • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringement s of patents or other rights of the third parties which may result from its use. No license is granted by implic ation or otherwise under any patents or other rights of TOSHIBA or the third parties.
  • Please contact your sales representative for product- by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.