TPCI100 TEWS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

TPCI100 PCI Carrier for 2 Industry Packs®

Application Information

The TPCI100 is a standard 33 MHz 32 bit PCI Carrier for up to two single-size or one double-size IndustryPack (IP) modules allowing to build up modular, flexible and cost effective I/O solutions for all kinds of applications like process control, medical systems, telecommunication and traffic control. Two 50 pin 0.1 inc h flat ribbon cable connectors provide access to all IP I/O lines. Status indicators for IP access, +5V and +/-12V are provided. The TPCI100 can operate with 3.3V and 5.0V PCI I/O signaling voltage for I/O. This guaranties compatibility with nearly all PC mainboards. 3.3V required by on board logic is generated locally. All IP interrupt request lines are mapped to PCI INTA. For fast interrupt source detection, the TPCI100 provides a special IP interrupt status register. The IP power lines are fuse protected by self healing fuses and RF filtered. The operating temperature range is -40°C to +85°C. Software Support (CARRIER-SW-xx) for different operating systems is available. TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice. All trademarks mentioned are property of their respective owners. Issue 1.0.1 2018-08-31 TEWS TECHNOLOGIES GmbH Am Bahnhof 7 25469 Halstenbek, Germany Phone: +49 (0) 4101 4058 0 Fax: +49 (0) 4101 4058 19 e-mail: info@tews.com www.tews.com

 PCI Card Interface  PCI 2.2 compliant interface  Size: 107 mm x 125 mm  PCI I/O signaling voltage: 3.3V or 5.0V  ANSI/VITA 4-1995 compliant interface to IndustryPack modules  IndustryPack slots: two single-size or one double- size  8/32 MHz interface, no DMA  8 Mbytes memory space per IP  Routing of all IP interrupts to PCI INTA, local interrupt status register  I/O access: 50 pin 0.1 inch flat ribbon cable connector per IP  Status LED’s  ACK LED for each IP module  +5V Power LED for each IP slot  +12V and –12V Power LED  Self Healing fuses and RF-filtering on all IP power lines  Operating temperature –40°C to +85°C TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice. All trademarks mentioned are property of their respective owners. Issue 1.0.1 2018-08-31 TEWS TECHNOLOGIES GmbH Am Bahnhof 7 25469 Halstenbek, Germany Phone: +49 (0) 4101 4058 0 Fax: +49 (0) 4101 4058 19 e-mail: info@tews.com www.tews.com

TPCI100-10R 2 Slot IndustryPack Carrier, 50 pin ribbon cable connectors For the availability of non-RoHS compliant (leaded solder) products please contact TEWS. Documentation TPCI100-DOC User Manual Software CARRIER-SW-42 VxWorks Software Support (Legacy and VxBus-enabled Software Support) CARRIER-SW-65 Windows IP Carrier Software Support CARRIER-SW-82 Linux IP Carrier Software Support CARRIER-SW-95 QNX IP Carrier Software Support For other operating systems please contact TEWS.

Related Products

TA305 Cable Kit for modules with 50 pin ribbon cable connector TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice. All trademarks mentioned are property of their respective owners. Issue 1.0.1 2018-08-31 TEWS TECHNOLOGIES GmbH Am Bahnhof 7 25469 Halstenbek, Germany Phone: +49 (0) 4101 4058 0 Fax: +49 (0) 4101 4058 19 e-mail: info@tews.com www.tews.com