TPC-110W

TPC-100W_V01 ADVANTECH | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 70

Technical content

Datasheet sections

• 1.1 Introduction
• 1.1.1 Accessories Ordering P/N
• 1.2 Specifications
• 1.2.1 System Kernel
• 1.2.2 Communication Interface
• 1.2.3 LCD Panel
• 1.2.4 Touchscreen
• 1.2.5 Environment
• 1.2.6 EMC and Safety
• 1.2.7 Power
• 1.2.8 External I/O
• 1.3 Mounting
• 1.4 Dimensions and Cutout
• 2.1 Transport and Unpacking
• 2.2 System Configuration
• 2.3.2 PoE Module Installation
• 2.4 System Power on
• 2.4.1 Embedding the TPC-100W System and Earth Grounding Setup20
• 3.2.1 System Default Software
• 3.2.2 GPU Accelerations
• 3.2.4 First Login
• 3.3 TPC-100W Module Extension
• 3.3.1 Module Information
• 3.3.2 The Configuration and Connection of WIFI Module
• 3.3.3 The Configuration and Connection of Bluetooth Module
• 3.4 Time and Date Setting
• 3.5 CAN Setting
• 3.6 Brightness Setting
• 3.7 COM Setting
• 3.8 Firewall Setting
• 3.9 Recovery
• 3.10 GUI Settings Tool
• 3.11 Weston Keyboard Shortcuts
• 4.1 Android
• 4.2 Android 10 Software Support
• 4.2.1 System Default Software
• 4.2.2 Other Applications

電腦 7"/10.1"/15.6"/21.5" Touch Panel Computer with ARM® Cortex®-A53 Processor

TPC-100W Series User Manual ii 限用物質含有情況標示聲明書 Declaration of the Presence Condition of the Restricted Substances Marking 製造商：研華股份有限公司 地址：台北市內湖區瑞光路 26 巷 20 弄 1 號 電話：02-27927818 Manufacturer: ADVANTECH Co., Ltd. Address: No. 1 Alley 20 Lane 26, Rueiguang Rd., Neihu District, Taipei City Telephone: 02-27927818 設備名稱： 電腦 型號 （型式）：TPC-107W、TPC-115W、TPC-110W Equipment name Type designation (Type) 單元 Unit 限用物質及其化學符號 Restricted substances and their chemical symbols 鉛 Lead (Pb) 汞 Mercury (Hg) 鎘 Cadmium (Cd) 六價鉻 Hexavalent chromium (Cr+6) 多溴聯苯 Polybrominated biphenyls (PBB) 多溴二苯醚 Polybrominated diphenyl ethers (PBDE) 內外殼( 外殼、內部 其它固定組件 (螺 配件 (滑鼠、鍵盤、 電源線、排線、傳輸 線、網路線…等) 備考1.“超出 0.1 wt %”及“超出 0.01 wt %”係指限用物質之百分比含量超出百分比含量基準 Note 1. “Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the content of the restricted substance exceeds the defined concentration limit. 備考2.“○”係指該項限用物質之百分比含量未超出百分比含量基準值。 Note 2. “○” indicates that the content of the restricted substance does not exceed the defined concen- tration limit. 備考3.“－”係指該項限用物質為排除項目。 Note 3. “-” indicates that the restricted substance is not present in the product.

iii TPC-100W Series User Manual Copyright The documentation and the software included with this product are copyrighted 2023 to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. The information provided in this manual is intended to be accurate and reliable. However, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringements of the rights of third parties that may result from its use. Acknowledgments NXP and Freescale are registered trademarks of NXP Semiconductors N.V. All other product names or trademarks are properties of their respective owners. This manual is applicable to the following models: TPC-107W TPC-107W-N31YB TPC-107W-N31AB TPC107WXXXXXXXXX-T TPC-110W TPC-110W-N31YB TPC-110W-N31AB TPC110WXXXXXXXXX-T TPC-115W TPC-115W-N31YB TPC-115W-N31AB TPC115WXXXXXXXXX-T TPC-121W TPC-121W-N31YB TPC-121W-N31AB TPC121WXXXXXXXXX-T Part No. 2004100W00 Edition 1 Printed in Taiwan April 2023

TPC-100W Series User Manual iv Product Warranty (2 years) Advantech warrants the original purchaser that each of its products will be free from defects in materials and workmanship for two years from the date of purchase. This warranty does not apply to any products that have been repaired or altered by persons other than repair personnel authorized by Advantech, or products that have been subject to misuse, abuse, accident, or improper installation. Advantech assumes no liability under the terms of this warranty as a consequence of such events. Because of Advantech’s high quality-control standards and rigorous testing, most customers never need to use our repair service. If an Advantech product is defective, it will be repaired or replaced free of charge during the warranty period. For out-of- warranty repairs, customers will be billed according to the cost of replacement mate- rials, service time, and freight. Please consult your dealer for more details. If you believe your product to be defective, follow the steps outlined below. 1. Collect all the information about the problem encountered. (For example, CPU speed, Advantech products used, other hardware and software used, etc.) Note anything abnormal and list any onscreen messages displayed when the prob- lem occurs. 2. Call your dealer and describe the problem. Please have your manual, product, and any helpful information readily available. 3. If your product is diagnosed as defective, obtain a return merchandise authori- zation (RMA) number from your dealer. This allows us to process your return more quickly. 4. Carefully pack the defective product, a completed Repair and Replacement Order Card, and a proof of purchase date (such as a photocopy of your sales receipt) into a shippable container. Products returned without a proof of pur- chase date are not eligible for warranty service. 5. Write the RMA number clearly on the outside of the package and ship the pack- age prepaid to your dealer. Technical Support and Assistance 1. Visit the Advantech website at www.advantech.com/support to obtain the latest product information. 2. Contact your distributor, sales representative, or Advantech's customer service center for technical support if you need additional assistance. Please have the following information ready before calling: – Product name and serial number – Description of your peripheral attachments – Description of your software (operating system, version, application software, etc.) – A complete description of the problem – The exact wording of any error messages

v TPC-100W Series User Manual Declaration of Conformity CE This product has passed the CE test for environmental specifications when shielded cables are used for external wiring. We recommend the use of shielded cables. This type of cable is available from Advantech. Please contact your local supplier for ordering information. Test conditions for passing also include the equipment being operated within an industrial enclosure. In order to protect the product from damage caused by electro - static discharge (ESD) and EMI leakage, we strongly recommend the use of CE- compliant industrial enclosure products. FCC Class A This equipment has been tested and found to comply with the limits for a Class A dig- ital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro - vide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Opera- tion of this equipment in a residential area is likely to cause harmful interference. In this event, users are required to correct the interference at their own expense. 甲類資訊技術設備 甲類設備為其他符合甲類設備限制值之資訊技術設備，而非符合乙類資訊技術設備的 限制值；雖然不可限制此類設備之行銷，但使用場所必須被限制，不得進行居住的環 境中，且應於其機器本體及使用說明書中含有下列警語:

TPC-100W Series User Manual vi Warnings, Cautions, and Notes Warning! Warnings indicate conditions that if not observed can cause personal injury! Les avertissements indiquent des conditions qui, si elles ne sont pas respectées, peuvent blessure! Warning! Do not expose the equipment to direct sunlight, or install the equipment in an environment with direct sunlight, as this may cause damage. N'exposez pas l'équipement à la lumière directe du soleil et n'installez pas l'équipement dans un environnement exposé à la lumière directe du soleil, car cela pourrait causer des dommages. Caution! Cautions are included to help prevent hardware damage and data losses. For example, “Batteries are at risk of exploding if incorrectly installed. Do not attempt to recharge, force open, or heat the battery. Replace the battery only with the same or equivalent type as recommended by the manufacturer. Discard used batteries according to the manufacturer's instructions.” Des précautions sont incluses pour aider à prévenir les dommages matériels et les données pertes. Par exemple, Les piles risquent d'exploser si elles sont mal installées. Ne pas tenter pour recharger, forcer l'ouverture ou chauffer la batterie. Remplacer la batterie uniquement avec le même type ou un type équivalent recom- mandé par le fabricant. Jetez les piles usagées conformément aux instructions du fabricant. Note! Notes provide additional optional information. Les remarques fournissent des informations facultatives supplémen- taires.

vii TPC-100W Series User Manual Safety Instructions 1. Read these safety instructions carefully. 2. Retain this user manual for future reference. 3. Disconnect the equipment from all power outlets before cleaning. Use only a damp cloth for cleaning. Do not use liquid or spray detergents. 4. For pluggable equipment, the power outlet socket must be located near the equipment and easily accessible. 5. Protect the equipment from humidity. 6. Place the equipment on a reliable surface during installation. Dropping or letting the equipment fall may cause damage. 7. The openings on the enclosure are for air convection. Protect the equipment from overheating. Do not cover the openings. 8. Ensure that the voltage of the power source is correct before connecting the equipment to a power outlet. 9. Position the power cord away from high-traffic areas. Do not place anything over the power cord. 10. All cautions and warnings on the equipment should be noted. 11. If the equipment is not used for a long time, disconnect it from the power source to avoid damage from transient overvoltage. 12. Never pour liquid into an opening. This may cause fire or electrical shock. 13. Never open the equipment. For safety reasons, the equipment should be opened only by qualified service personnel. 14. If any of the following occurs, have the equipment checked by service personnel: – The power cord or plug is damaged. – Liquid has penetrated the equipment. – The equipment is malfunctioning, or does not operate according to the user manual. – The equipment has been dropped and damaged. – The equipment shows obvious signs of breakage. 15. Do not leave the equipment in an environment with a storage temperature of below -30° C (-22° F) or above 70° C (158° F) as this may damage the compo- nents. The equipment should be kept in a controlled environment. 16. CAUTION: Batteries are at risk of exploding if incorrectly replaced. Replace only with the same or equivalent type as recommended by the manufacturer. Discard used batteries according to the manufacturer’s instructions. 17. In accordance with IEC 704-1:1982 specifications, the sound pressure level at the operator’s position does not exceed 70 dB (A). 18. This product is not intended for use by children (this product is not a toy). 19. This equipment is not suitable for use in locations where children are likely to be present. 20. By means of a power cord connected to a socket-outlet with earthing connec- tion. Assurez-vous que la tension de la source d'alimentation est correcte avant de connecter l'équipement à la prise de courant. Au moyen d'un cordon d'alimenta- tion connecté à une prise de courant avec mise à la terre. 21. Caution: The wire of the protective bonding conductor shall be green-and-yel- low, 22AWG/0.3mm2 minimum. Attention: Le fil du conducteur de liaison de protection doit être vert et jaune, 22AWG/0,3 mm2 minimum. DISCLAIMER: These instructions are provided according to IEC 704-1 standards. Advantech disclaims all responsibility for the accuracy of any statements contained herein.

TPC-100W Series User Manual viii 安全指示 1. 請仔細閱讀此安全操作說明。 2. 請妥善保存此用戶手冊供日後參考。 3. 用濕抹布清洗設備前，請從插座拔下電源線。請不要使用液體或去汙噴霧劑清洗 設備。 4. 對於使用電源線的設備，設備周圍必須有容易接觸到的電源插座。 5. 請不要在潮濕環境中使用設備。 6. 請在安裝前確保設備放置在可靠的平面上，意外跌落可能會導致設備損壞。 7. 設備外殼的開口是用於空氣對流，從而防止設備過熱。請不要覆蓋這些開口。 8. 當您連接設備到電源插座上前，請確認電源插座的電壓是否符合要求。 9. 請將電源線佈置在人們不易絆到的位置，並不要在電源線上覆蓋任何雜物。 10. 請注意設備上的所有警告和注意標示。 11. 如果長時間不使用設備，請將其同電源插座斷開，避免設備被超標的電壓波動損 12. 請不要讓任何液體流入通風口，以免引起火災或者短路。 13. 請不要自行打開設備。為了確保您的安全，請由經過認證的工程師來打開設備。 14. 如遇下列情況，請由專業人員來維修： – 電源線或者插頭損壞； – 設備內部有液體流入； – 設備曾暴露在過於潮濕的環境中使用； – 設備無法正常工作，或您無法通過用戶手冊來使其正常工作； – 設備跌落或者損壞； – 設備有明顯的外觀破損。 15. 請不要把設備保存在超出我們建議的溫度範圍的環境，即不要低於 -30°C（-4 °F）或高於 70°C（140°F），否則可能會損壞設備。 16. 注意：如果電池放置不正確，將有爆炸的危險。因此，只可以使用製造商推薦的 同一種或者同等型號的電池進行替換。請按照製造商的指示處理舊電池。 17. 根據 IEC 704-1:1982 的規定，操作員所在位置的音量不可高於 70dB(A)。 18. 限制區域：請勿將設備安裝於限制區域使用。 19. 免責聲明：該安全指示符合 IEC 704-1 的要求。研華公司對其內容的準確性不 承擔任何法律責任。 20. 使用過度恐傷害視力。 21. 使用 30 分鐘請休息 10 分鐘。 22. 未滿 2 歲幼兒不看螢幕，2 歲以上每天看螢幕不要超過 1 小時。 23. 本產品為國內裝置使用時，其電源僅限使用架構電源模組所提供電源直流輸入， 不得使用交流電源及附加其他電源轉換裝置提供電源這者，其電源輸入電壓及電 流請依說明書規定使用。 Caution! Danger d'explosion si la batterie est mal remplace. Remplacer unique- ment par le meme type ou equivalent recommandé par le fabricant. Jeter les piles usagées selon les instructions du fabricant.

ix TPC-100W Series User Manual Wichtige Sicherheishinweise 1. Bitte lesen sie Sich diese Hinweise sorgfältig durch. 2. Heben Sie diese Anleitung für den späteren Gebrauch auf. 3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Verwenden Sie Keine Flüssig-oder Aerosolreiniger. Am besten dient ein angefeuchtetes Tuch zur Reinigung. 4. Die NetzanschluBsteckdose soll nahe dem Gerät angebracht und leicht zugänglich sein. 5. Das Gerät ist vor Feuchtigkeit zu schützen. 6. Bei der Aufstellung des Gerätes ist auf sicheren Stand zu achten. Ein Kippen oder Fallen könnte Verletzungen hervorrufen. 7. Die Belüftungsöffnungen dienen zur Luftzirkulation die das Gerät vor über- hitzung schützt. Sorgen Sie dafür, dass diese Öffnungen nicht abgedeckt werden. 8. Beachten Sie beim. Anschluss an das Stromnetz die AnschluBwerte. 9. Verlegen Sie die Netzanschlussleitung so, dass niemand darüber fallen kann. Es sollte auch nichts auf der Leitung abgestellt werden. 10. Es sollte auch nichts auf der Leitung abgestellt werden. Alle Hinweise und War- nungen die sich am Ger?ten befinden sind zu beachten. 11. Wird das Gerät über einen längeren Zeitraum nicht benutzt, sollten Sie es vom Stromnetz trennen. Somit wird im Falle einer Überspannung eine Beschädigung vermieden. 12. Durch die Lüftungsöffnungen dürfen niemals Gegenstände oder Flüssigkeiten in das Gerät gelangen. Dies könnte einen Brand bzw. elektrischen Schlag aus- lösen. 13. Öffnen Sie niemals das Gerät. Das Gerät darf aus Gründen der elektrischen Sicherheit nur von authorisiertem Servicepersonal geöffnet werden. 14. Wenn folgende Situationen auftreten ist das Gerät vom Stromnetz zu trennen und von einer qualifizierten Servicestelle zu überprüfen: – Netzkabel oder Netzstecker sind beschädigt. – Flüssigkeit ist in das Gerät eingedrungen. – Das Gerät war Feuchtigkeit ausgesetzt. – Wenn das Gerät nicht der Bedienungsanleitung entsprechend funktioniert oder Sie mit Hilfe dieser Anleitung keine Verbesserung erzielen. 15. VOSICHT: Explisionsgefahr bei unsachgemaben Austausch der Batterie.Ersatz nur durch densellben order einem vom Hersteller empfohlene-mahnlichen Typ. Entsorgung gebrauchter Batterien navh Angaben des Herstellers. 16. ACHTUNG: Es besteht die Explosionsgefahr, falls die Batterie auf nicht fach- männische Weise gewechselt wird. Verfangen Sie die Batterie nur gleicher oder entsprechender Type, wie vom Hersteller empfohlen. Entsorgen Sie Batterien nach Anweisung des Herstellers. 17. Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 Teil 1000 beträgt 70dB(A) oder weiger. 18. Haftungsausschluss: Die Bedienungsanleitungen wurden entsprechend der IEC-704-1 erstellt. Advantech lehnt jegliche Verantwortung für die Richtigkeit der in die- sem Zusammenhang getätigten Aussagen ab. 19. Assurez-vous que la tension de la source d'alimentation est correcte avant de connecter l'équipement à la prise de courant. Au moyen d'un cordon d'alimen- tation connecté à une prise de courant avec mise à la terre. 20. Attention: Le fil du conducteur de liaison de protection doit être vert et jaune, 22AWG/0,3 mm2 minimum.

TPC-100W Series User Manual x Safety Precaution - Static Electricity Follow these simple precautions to protect yourself from harm and the products from damage.  To avoid electrical shock, always disconnect the power from your PC chassis before you work on it. Don't touch any components on the CPU card or other cards while the PC is on.  Disconnect power before making any configuration changes. The sudden rush of power as you connect a jumper or install a card may damage sensitive elec- tronic components.

TPC-100W Series User Manual xii

1 General Information

TPC-100W Series User Manual 2

1.1 Introduction

The TPC-100W series is a compact touch panel computer equipped with an NXP ® Cortex®-A53 i.MX8M Mini quad-core processor, 7”/10.1”/15.6”/21.5" TFT LCD dis - play, multi-touch glass sensor,16GB of eMMC Storage. To ensure stable operation in harsh industrial environments, TPC-100W supports a wide operating temperature range (-20 ~ 60° C/-4~140° F) and Panel mounting features an IP66-rated front panel that protects against water and dust ingress. For web-based operations, TPC-100W offers two 10/100/1000 LANs that one sup - ports the IEEE 802.3at PoE-PD standard. The inclusion of and browsers enable rapid Web application development and easy configuration. Finally, TPC-100W supports various OS including Linux Ubuntu Desktop with full QT graphics and Android to ensure easy deployment for diverse applications.  NXP® ARM Cortex®-A53 i.MX8M Mini Quad core processor  7" 16:9 WSVGA LCD wide screen with PCAP multi-touch  10.1” 16:9 WXGA LCD wide screen with PCAP multi-touch  15.6” HD WXGA LCD wide screen with PCAP multi-touch  15.6” FHD LCD wide screen with PCAP multi-touch  21.5" FHD LCD wide screen with PCAP multi-touch  Up to 2GB LPDDR4 RAM & 16GB eMMC storage onboard  10/100/1000 Mbps LAN  1MB FRAM backup memory for power interruption situation  2 x Serial port with termination resistor 120Ω that one supports CAN 2.0B proto- col specification and programmable bit rate up to 1 Mb/sec  Yocto3.3 version supports Optional M.2 Wifi, Bluetooth,TPM.2.0 and POE (7” and 10.1” only) module expansion support  Android 10 version supports Optional M.2 WiFi and PoE (7" and 10.1" only) module expansion support  Panel mounting with true-flat IP66 front panel support  -20 ~ 60° C wide operating temperature range

1.1.1 Accessories Ordering P/N

 M.2 Key-E 2230 Express Module: 98R4T100W01  PoE Module: 98R4T100W00 (7" and 10.1" only)

3 TPC-100W Series User Manual

Chapter 1General Information

1.2 Specifications

1.2.1 System Kernel

 CPU: NXP® ARM Cortex®-A53 i.MX8 Mini Quad Core 1.6 GHz Processor  Memory: Quad Core: 2GB DDR4 RAM on board  Storage Memory: 16GB eMMC on board; 1MB FRAM for data backup  Watchdog Timer: Programmable as 1 second

1.2.2 Communication Interface

 Serial Port: – 1 x RS-232/422/485 (COM 1) – 1 x selectable mode for RS485 and CAN 2.0 B  LAN Port: 2 x RJ45 with 10/100/1000 Mbps LAN  Others: – 1 x USB 2.0 Micro USB Client – 2 x USB 2.0 Type-A Host 1 x Micro SD (Internal) – 1 x M.2 Key-E 2230 (Wi-fi/BT)

1.2.3 LCD Panel

1.2.4 Touchscreen

 Touch Points: 10 Points  Light Transmission: above 85%  Pencil Hardness: 7H  Type: Projected capacitive (P-CAP) touch Category Item 7" 10.1" 15.6" (HD) 15.6" (FHD) 21.5"(FHD) LCD Display Type WSGA TFT LCD WXGA TFT LCD WXGA TFT LCD FHD TFT LCD FHD TFT LCD Max. Resolution 1024 x 600 1280 x 800 1366 x 768 1920 x 1080 1920 x 1080 Aspect Ratio 16:9 16:10 16:9 16:9 16:9 Luminance (cd/m²) 425 500 300 450 250 Viewing Angle (H/V°) 170/170 170/170 160/160 170/170 89/89 Backlight Life 50,000hrs 50,000hrs 50,000hrs 50,000hrs 50000hrs Contrast Ratio 800:1 800:1 500:1 800:1 1000:1 Touch Type Projected capacitive Projected capacitive Projected capacitive Projected capacitive Projected capacitive System Temperature Operating -20 ~ 60 °C (-4 ~ 140 °F) -20 ~ 60 °C (-4 ~ 140 °F) -20 ~ 60 °C (-4 ~ 140 °F) -20 ~ 60 °C (-4 ~ 140 °F) 0~60°C (32~140 °F) Storage -30 ~ 70 °C (-22 ~ 158 °F) -30 ~ 70 °C (-22 ~ 158 °F) -30 ~ 70 °C (-22 ~ 158 °F) -30 ~ 70 °C (-22 ~ 158 °F) -20 ~ 60 °C (-4 ~ 140 °F)

TPC-100W Series User Manual 4

1.2.5 Environment

 Operating Temperature: The Temperature of Safety Certification is from -20~50°C (-4~122 °F) The Temperature of Safety Certification is from -20 ~ 50 °C (-4 ~ 122 °F)  Storage Temperature:  Humidity: 10 ~ 90% RH @ 40 °C, non-condensing  Ingress Protection: Compliant with IP66 on front panel  Vibration Protection: 2 Grms random vibration (5 ~ 500 Hz) during operation (compliant with IEC60068-2-64)  Shock Protection: 10 G shock under 11 ms operation (compliant with IEC60068-2-27)

1.2.6 EMC and Safety

 EMC: CE, FCC Class A, BSMI  Safety: CB, UL, CCC

1.2.7 Power

 Input Voltage: 24Vdc ± 20% or PoE+ Power Input - IEEE 802.3at PD required on LAN B  Power Consumption: – TPC-107W: 6W (Typ.); 9W (Max.) – TPC-110W: 10W (Typ.); 12W (Max.) – TPC-115W: 13W (Typ.); 16W (Max.)

1.2.8 External I/O

The arrangement of I/O ports is shown below.

5 TPC-100W Series User Manual

Chapter 1General Information

1.3 Mounting

 VESA Mount The TPC-100 rear cover features four VESA mounting (100 x 100 mm) holes. The VESA mounting kit needs to be installed by 4pcs M4x10L screws. Please use suit - able mounting apparatus to avoid risk of injury.  Panel Mount There is an adhesive waterproof gasket on the front bezel. Make sure the waterproof gasket is in position before installing a TPC-100W panel computer into the panel opening. 1. Install the TPC into the panel opening. 2. Find the six clamps and six long screws in the accessory pack. Hook the clamps to the holes around the four sides of the bezel. Insert the screws into every clamp and fasten them. These screws will push the mounting panel and fix the unit. 3. The suggested mounting panel thickness is less than 6 mm (0.236”). Insert the screws into each clamp and tighten them to fasten the clamp in place. Hook the clamp into the holes and fasten the screws (Torque: 5 kgf-cm) These screws will push the mounting panel and secure the unit. Size W7 W10 W15 Screw (M4 x 25mm) & Clamper Q’ty 4 8 10

TPC-100W Series User Manual 6

1.4 Dimensions and Cutout

7 TPC-100W Series User Manual

Chapter 1General Information TPC-115W TPC-121W 558.40 349.8 548.81 340.2 184 122 549.80 341.30 PANEL CUTOUT DIMENSION: 549.8mm X 341.3mm

TPC-100W Series User Manual 8 LED Indicator Off - “dark” ON - “Blue” Standby - “orange”

2 System Setup

TPC-100W Series User Manual 10

2.1 Transport and Unpacking

When accepting a delivery, please check the packaging for visible transportation damage and check the delivery for completeness by comparing it with your order form. If you notice any shipping damage or inconsistencies between the contents and your order, please inform the responsible delivery service immediately. During trans- portation, the TPC system should be protected from excessive mechanical stress. If the TPC system is transported or stored without packaging, shocks, vibrations, pres- sure, and moisture may impact the unprotected unit. Additionally, damaged packag - ing indicates that ambient conditions have already had a massive impact on the device. Therefore, please use the original packaging during transportation and stor - age. If the TPC system is transported in cold weather or is exposed to extreme varia- tions in temperature ensure that moisture (condensation) does not build up on or inside the HMI device. Moisture can result in short circuits and damage to the device. To avoid this, store the TPC system in a dry environment and bring the system to room temperature before powering it up. If condensation occurs, a delay time of approximately 12 hours must be allowed to ensure that the system is completely dry before being switched on.

11 TPC-100W Series User Manual

2.2 System Configuration

TPC-100W is a compact touch panel with IIoT functions for industrial applications. The system setup will be completed by the dealer or system integrator prior to deliv - ery. However, users may still need to access the system to adjust configuration, such as the interface or boot modes. Before powering on, please open the rear bracket and select the correct mode. Configuration can be set via the switch on the TPC- 100W rear board as shown below. The default setting is RS232 mode and eMMC Boot. Kindly refer to the following pin definition table for mode switch.  Boot Mode: option (SW2) SD boot (Install image) 1. OFF 2. ON 3. ON eMMC boot default 1. ON 2. OFF 3. OFF

TPC-100W Series User Manual 12  7”  10”  15” HD CN6001 CN6001(1-3,2-4) SW6001 1.ON 2.OFF CN6001 CN6001(1-3,2-4) SW6001 1.ON 2.OFF CN6001 CN6001(3-5,4-6) SW6001 1.ON 2.OFF

13 TPC-100W Series User Manual

 15” FHD  21” FHD  AT/ATX(SW1) CN6001 CN6001(3-5,4-6) SW6001 1.ON 2.OFF CN6001 CN6001(3-5,4-6) SW6001 1.ON 2.OFF AT 2.ON 1.OFF ATX 2.OFF 1.ON

TPC-100W Series User Manual 14 2.3 M.2 Key-E 2230 Express and PoE Module Installation 2.3.1 M.2 Card Installation TPC-100W provides M.2 key Express slot and allows users to expend functions like Wi-Fi and Bluetooth type modules. Open the rear bracket and configure the M.2 module. (Refer to Appendix A1 for the detailed M.2 Slot E-Key).

15 TPC-100W Series User Manual

2.3.2 PoE Module Installation

1. Remove the post x4. 2. Remove the screw x4.

TPC-100W Series User Manual 16 3. Remove the rear cover. 4. Fix Module PCB by Screw x4(Screw PN:1930002181, Screw M2.5x4L R/S D=4.3 H=1.6 (1+) ST Ni NK).

17 TPC-100W Series User Manual

1. Connect cable x2. 6. Put back the rear cover.

TPC-100W Series User Manual 18 7. Fix the screw x4. 8. Fix the post x4.

19 TPC-100W Series User Manual

2.4 System Power on

A 2-pin power connector is included in the accessory box. Connect the power con - nector to Vdc power lines and plug the power lines into the system power receptor. DC power source shall be complied with ES1 and PS2 (LPS) requirements, output rating is 24 Vdc, minimum 0.83Aor 48Vdc,minimum 0.53A, with minimum operating temperature 60° C, and has to be evaluated according to IEC/UL 62368-1. The terminal block is suitable for 16~26 AWG(10A). Torque value 2.5 lb-in. User cop- per conductors only. Must be installed by skilled person. Warning! The system may get damaged when the power is turned on and the power source is not connected to the correct pins. Le système peut être endommagé lors de la mise sous tension et la source d'alimentation n'est pas connectée aux bonnes broches. Warning! The PoE networks without routing to the outside plant, or equivalent. Les réseaux PoE sans routage vers l'installation extérieure, ou équiva- lent.

TPC-100W Series User Manual 20

2.4.1 Embedding the TPC-100W System and Earth Grounding

Follow the following steps to setup TPC-100W system, and please pay attention that Ground pin of TPC-100W system should be connected to earth ground. Under this circumstance, TPC-100W system could have the best performance such as EMI immunity, ESD immunity, Surge immunity and also system isolation. If the TPC-100W system is embedded in the cabinet, the TPC-100W system’s ground, cabinet’s ground and earth ground should be connected together. 1. Install the TPC-100W system into the cabinet. A: Connect the cabinet to earth ground. B: Embed the TPC-100W system into the cabinet without any I/O cable and power.

21 TPC-100W Series User Manual

1. System wiring. A: Connect the cabinet to earth ground. B: Ensure that all cabinet has been grounded together. C: Connect the ground of the power supply to the cabinet. D: Connect the ground pin of TPC-100W system to the cabinet. E: Connect the I/O to the controller if needed. F: Connect the V+ and V- of power supply to TPC-100W system. Power should only be supplied after the wiring A-F have been performed. Caution! Ensure that all wires follow the installation guidelines or damage to he system may occur. Assurez-vous que tous les fils suivent les directives d'installation ou qu'ils sont endommagés. système peut se produire.

TPC-100W Series User Manual 22

3 Linux Yocto

TPC-100W Series User Manual 24 3.1 ARM Yocto 3.0 TPC-100W platform is an embedded system with Linux Yocto 3.0. It contains system- required commands and drivers ready. The Yocto Project is an open source collaboration project that helps developers cre - ate custom Linux-based systems that are designed for embedded products regard - less of the product's hardware architecture. Yocto Project provides a flexible toolset and a development environment that allows embedded device developers across the world to collaborate through shared technologies, software stacks, configurations, and best practices used to create these tailored Linux images. 3.2 ARM Yocto 3.0 Software Support

3.2.1 System Default Software

ARM Yocto 3.0 support complete IIoT function as default including:  SSH  Wayland Terminal  Qt5.15.0  Gstreamer1.0  Imx-gpu-viv 6.4.3.p1.4  Wayland 1.18.0-r0  Weston 9.0.0.imx-r0  Weston-xwayland 9.0.0.imx-r0  VNC  TPM SLB9670  GUI Settings Tool  Recovery  Security boot

3.2.2 GPU Accelerations

Vivante GPU accelerations for Wayland; The Hantro Video Processing Unit supports the following decoders:  video/x-h265  video/x-vp9  video/x-h264  video/x-vp8  video/x-vp6-flash  video/mpeg  video/x-h263  video/x-flash-video  video/x-divx  video/x-xvid  video/x-cavs  video/x-wmv  video/x-pn-realvideo  video/x-raw

25 TPC-100W Series User Manual

3.2.3 Install Yocto 3.0 Software Firstly, burning image to microSD card and instruction as below. If you already have the microSD card with Yocto image, you can go to the second part directly. If your PC is Linux environment: 1. Prepare the Linux environment that can use “uncompress” and “dd” command. (Below uses ubuntu 18.04 as example.) 2. Use “tar Jxvf filename” to uncompress the file to img format. If your file has already been img format, please go to next step directly. 3. Use “sudo dd if=imgfile of=SDpartition bs=4096” to burn the img file to your microSD card. (Note: You should check which partition is your microSD card firstly and you can format your microSD card before this step to avoid compati- bility issue.) If your PC is Windows: 1. Unzip the file to img format. 2. Use the Rufus or Raspberry Pi Imager provided by Raspberry Pi to burn the img file to your microSD card. You can refer to below link for the usage of the tools. Raspberry Pi Imager: https://www.raspberrypi.com/news/raspberry-pi-imager-imaging-utility/ Rufus: https://rufus.ie/en/ Note! 1. Recommend th storage device is more than 16GB storage interface( ex: MicroSD) to avoid not enough storage space. 2. Depend on Hardware limited, won't wake up after click GUI suspend button. 3. Not support software install online through apt-get command. 4. Not support mount USB storage for NTFS format. 5. Recommended used command sync to ensure data is written and sync to the hard drive, prevented power supply cut-off cause data lost. $ sudo dd if=eamb9918-sdcard_1.1.0.img of=/dev/sdc bs=4096

TPC-100W Series User Manual 26 Second, after image is put into microSD card, use microSD card to update the image. 1. Remove the screws from back cover. Due to COM port cover need to put down, then slide up.

27 TPC-100W Series User Manual

1. Insert microSD card, then adjust switch as below order (red remark). 3. Power on the system and open Terminal. Then input below commands. sh-5.0# cd /mk_inand/scripts sh-5.0# ./mkinand-linux.sh /dev/mmcblk2

TPC-100W Series User Manual 28 4. Waiting for update is finished. Then power off the system. 5. Adjust switch as below location, remove microSD card. 6. Power on again from eMMC.

3.2.4 First Login

If you are the first time to login the system, it will ask you to setup the password. Please connect the physical keyboard and use the account “root” to login. Then you have to input the password you want to use 2 times and reboot the system. Now you can use the Yocto system with GUI.

29 TPC-100W Series User Manual

3.3 TPC-100W Module Extension

TPC-100W supports one M.2 E-Key slot which allows users to expand the functional- ity. There are pre-configured Wi-Fi modules ready to use. This chapter will take Wi-Fi module as an example to demonstrate how to use a module on TPC-100W.

3.3.1 Module Information

P/N: 968DD00086 M.2 2230 RYWDB02 802.11a/b/g/n+BT5 Cable: 17cm~20cm

3.3.2 The Configuration and Connection of WIFI Module

1. Check the WIFI device exists. Or you can use below command to check. If the WIFI node exists, the WIFI driver works normally. $ ifconfig wifi wifi0 Link encap:Ethernet HWaddr 88:da:1a:76:38:bc inet6 addr: fe80::8ada:1aff:fe76:38bc/64 Scope:Link UP BROADCAST MULTICAST DYNAMIC MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) ls /sys/class/net/ can0 can1 eth0 eth1lo wifi0

TPC-100W Series User Manual 30 2. Enable WIFI. If “Powered = True”, it means WIFI is enabled. If WIFI is disabled, please use below command to enable it. $ connmanctl technologies /net/connman/technology/p2p Name = P2P Type = p2p Powered = False Connected = False Tethering = False /net/connman/technology/wifi Name = WiFi Type = wifi Powered = True Connected = False Tethering = False /net/connman/technology/bluetooth Name = Bluetooth Type = bluetooth Powered = True Connected = False Tethering = False /net/connman/technology/ethernet Name = Wired Type = ethernet Powered = True Connected = True Tethering = False 1 $ connmanctl enable wifi

31 TPC-100W Series User Manual

1. Scanning WIFI hotspot. 4. Connect to WIFI hotspot. If the WIFI hotspot needs password, it will remind you to input. 5. Now you can browse the internet by WIFI. $ connmanctl scan wifi $ connmanctl services *AO Wired ethernet_c400ad7d091c_cable advanxxx wifi_88da1a7638bc_616476616e74656368_managed_psk TP-LINK_A990 wifi_88da1a7638bc_54502d4c494e4b5f41393930_managed_psk QA-Test wifi_88da1a7638bc_51412d54657374_managed_psk TP-LINK_603854 wifi_88da1a7638bc_54502d4c494e4b5f363033383534_managed_none PCCWS_LOCAL wifi_88da1a7638bc_50434357535f4c4f43414c_managed_psk QA-Test-5G wifi_88da1a7638bc_51412d546573742d3547_managed_psk php wifi_88da1a7638bc_706870_managed_psk wifi_88da1a7638bc_hidden_managed_none wifi_88da1a7638bc_hidden_managed_psk KOALXA-AP-2.4 wifi_88da1a7638bc_4b4f414c58412d41502d322e34_managed_psk PCCWS_GDCN wifi_88da1a7638bc_50434357535f4744434e_managed_psk ChinaNet-APUU wifi_88da1a7638bc_4368696e614e65742d41505555_managed_psk DIRECT-8CAXA-JIANFENGmsMZ wifi_88da1a7638bc_4449524543542d38434158412d4 a49414e46454e476d734d5a_managed_psk HP-HOTSPOT-98-LaserJet M1218 wifi_88da1a7638bc_48502d484f5453504f542d39382d4c 617365724a6574204d31323138_managed_none KoalXARd@6 wifi_88da1a7638bc_4b6f616c584152644036_managed_psk TP-LINK_F8FE wifi_88da1a7638bc_54502d4c494e4b5f46384645_managed_none KOALXA-AP-5 wifi_88da1a7638bc_4b4f414c58412d41502d35_managed_psk connmanctl connmanctl> agent on Agent registered connmanctl> connect wifi_88da1a7638bc_616476616e74656368_managed_psk Agent RequestInput wifi_88da1a7638bc_616476616e74656368_managed_psk Passphrase = [ Type=psk, Requirement=mandatory ] Connected wifi_88da1a7638bc_616476616e74656368_managed_psk connmanctl> quit

TPC-100W Series User Manual 32

3.3.3 The Configuration and Connection of Bluetooth Module

1. Check the Bluetooth device status. If there is no device showed, it means no driver or device. 2. Enable Bluetooth service. 3. Open Bluetooth. 4. Scanning Bluetooth device. Start scanning: Stop scanning: Please record the MAC address you want to connect. root@Qing:~# hciconfig hci0: Type: BR/EDR Bus: USB BD Address: 00:1A:7D:DA:71:13 ACL MTU: 310:10 SCO MTU: 64:8 UP RUNNING RX bytes:574 acl:0 sco:0 events:30 errors:0 TX bytes:368 acl:0 sco:0 commands:30 errors:0 systemctl status bluetooth ## 如果没有active， 你需要执行以下指令， 否则，无须执行 systemctl enable bluetooth.service systemctl start bluetooth connmanctl enable bluetooth #or # hciconfig hci0 up bluetoothctl [bluetooth]# power on [bluetooth]# pairable on ## 扫描设备 [bluetooth]# scan on Discovery started [CHG] Controller 00:19:88:5E:10:B1 Discovering: yes [NEW] Device 98:39:8E:1B:D8:88 Galaxy A5 (2016) [CHG] Device 98:39:8E:1B:D8:88 RSSI: -86 Now, Copy the MAC Address of your PC ## 结束扫描 [bluetooth]# scan off

33 TPC-100W Series User Manual

1. Pair and connect to the Bluetooth device. Pair the device by MAC address. If the device is paired before, you can ignore this. Connect the device by MAC address. Trust the device by MAC address. Now the connection is successful. You can exit the bluetoothctl. 6. Using Obex profile to test the file transmission by Bluetooth. [bluetooth]# pair 98:39:8E:1B:D8:88 Attempting to pair with 98:39:8E:1B:D8:88 [CHG] Device 98:39:8E:1B:D8:88 Connected: yes Request confirmation [agent] Confirm passkey 117022 (yes/no): [bluetooth]# connect 98:39:8E:1B:D8:88 Attempting to connect to 98:39:8E:1B:D8:88 [CHG] Device 98:39:8E:1B:D8:88 Connected: yes Connection successful [CHG] Device 98:39:8E:1B:D8:88 ServicesResolved: yes 1 [bluetooth]# trust 98:39:8E:1B:D8:88 1 [bluetooth]# quit $ echo "helloworld" > /home/root/test.txt $ export $(dbus-launch) $ /usr/libexec/bluetooth/obexd -r /home/root -a -d & obexctl [obex]# connect 98:39:8E:1B:D8:88 [obex]# send <file> [obex]# quit

TPC-100W Series User Manual 34

3.4 Time and Date Setting

Set system time (2021/10/07 09:00:00): Synchronize time from the NTP server: Reset RTC hardware clock time (use current system time): Reset system time (use RTC hardware clock time): Set system time zone (use Taipei time): sh-5.0# ntpdate <NTPSERVERIP> sh-5.0# hwclock -w sh-5.0# hwclock -s sh-5.0# cp /usr/share/zoneinfo/Asia/Taipei /etc/localtime sh-5.0# sync

35 TPC-100W Series User Manual

3.5 CAN Setting

TPC-100W support FINTEK CAN. The below table shows the detailed information of CAN on TPC-100W and here we list the basic command to use CAN on TPC-100W. Setting: Open CAN device (The following examples will configure “can0” to bit-rate 250000, sample-point 0.875 and error restart with 100ms.) We’ll use “candump” to receive data, “cangen” & “cansend” to send data. The “can - gen” will send random data & ID and “cansend” will send specific data & ID to CAN - BUS. Send message (“123#R") to can0: Receive message from can0: HW DEVICE MODE Fintek CAN0 can0 socket can sh-5.0# ifconfig can0 down sh-5.0# ip link set can0 type can restart-ms 100 sh-5.0# ip link set can0 type can bitrate 250000 sample-point 0.875 sh-5.0# ip link set can0 type can berr-reporting on sh-5.0# ifconfig can0 txqueuelen 1000 sh-5.0# ifconfig can0 up sh-5.0# cansend can0 123#R sh-5.0# candump can0

TPC-100W Series User Manual 36

3.6 Brightness Setting

1. Get brightness value: 2. Set brightness value: You can set the value from 0~100. Please notice that value 0 will let the screen be black.

3.7 COM Setting

TPC-100W supports 2 COM port. One is RS232/422/485 and another is RS485. Set com0 as RS232 mode and baud rate 115200. Set com0 as RS422 mode and baud rate 115200. Set com0 as RS485 mode and baud rate 115200. sh-5.0# cat /sys/class/backlight/lvds_backlight\\@0/brightness Value 1 sh-5.0# echo 1 >> /sys/class/backlight/lvds_backlight\\@0/brightness Value 100 sh-5.0# echo 100 >> /sys/class/backlight/lvds_backlight\\@0/brightness sh-5.0# echo out > /sys/class/gpio/gpio85/direction sh-5.0# echo out > /sys/class/gpio/gpio86/direction sh-5.0# echo 1 > /sys/class/gpio/gpio85/value sh-5.0# echo 0 > /sys/class/gpio/gpio86/value sh-5.0# stty -F /dev/ttymxc0 -echo -onlcr 115200 sh-5.0# echo out > /sys/class/gpio/gpio85/direction sh-5.0# echo out > /sys/class/gpio/gpio86/direction sh-5.0# echo 1 > /sys/class/gpio/gpio85/value sh-5.0# echo 1 > /sys/class/gpio/gpio86/value sh-5.0# stty -F /dev/ttymxc0 -echo -onlcr 115200 sh-5.0# echo out > /sys/class/gpio/gpio85/direction sh-5.0# echo out > /sys/class/gpio/gpio86/direction sh-5.0# echo 0 > /sys/class/gpio/gpio85/value sh-5.0# echo 1 > /sys/class/gpio/gpio86/value sh-5.0# stty -F /dev/ttymxc0 -echo -onlcr 115200

37 TPC-100W Series User Manual

3.8 Firewall Setting

Linux Yocto image for TPC-100W enable 22 SSH, 80 HTTP , 443 HTTPS, 8080 SWUPDATE by default for usage. You can follow below command to change it. 1. Check the list of iptables. 2. Modify the /etc/iptables/iptables.rules and reboot the system.

3.9 Recovery

1. Check release version 2. Set environment. If you have installed the old system (the version is less then eamb9918- sdcard_1.0.0.img), you need to connect debug port and enter any key to stop uboot boot process to set the following command. 3. Local recovery mode. If you want to enter local recovery mode, download the file from Advantech website , then copy file to /userdata. After the automatic reboot, the operation of recovery will be performed automatically. Note: Switch to normal boot if the update is interrupted and cannot boot normally. sh-5.0# iptables -L sh-5.0# cat /etc/os-release #env default –a #saveenv #reset cd /userdata $ swupdate --update -g -i /userdata/swupdate-image_1.0.swu --reboot

TPC-100W Series User Manual 38 You need to connect debug port and enter any key to stop uboot boot process to set the following command. Then the system will reboot.

3.10 GUI Settings Tool

Advantech TPC-100W Settings Tool is a Linux-based utility. Settings Tool helps user to get image version, get/set network configuration, get/set time configuration, get/set screen configuration, set startup configuration, set VNC configuration and Set update/recovery configuration. For more information, you can refer to TPC-100W_ - Settings_Tool_User_Guide.pdf. $ env set recovery_status $ saveenv $ reset

39 TPC-100W Series User Manual

3.11 Weston Keyboard Shortcuts

The table below lists the actions that can be performed through Weston keyboard shortcuts, when the TPC-100W is connected to a keyboard. "super", i.e. Windows key between "ctrl" and "alt" (default value)  Capture a screenshot Refer to the table above for the command to be used. The captured picture (PNG for- mat) is automatically stored in /wayland-screenshot-2022-03-08_01-48-19.png. Command Action Condition(s) ctrl + scroll Zoom in/out the desktop Keyboard + mouse super + shift + f Put activated window fullscreen Keyboard super + left mouse button Move activated window Keyboard + mouse super + middle mouse button Rotate activated window Keyboard + mouse super + right mouse button Resize activated window Keyboard + mouse super + shift + left mouse button Resize activated window Keyboard + mouse super + tab Switch windows Keyboard super + k Kill activated window Keyboard super + s Capture a screenshot (see details below) Keyboard

TPC-100W Series User Manual 40

4 Android

TPC-100W Series User Manual 42

4.1 Android 10

TPC-100W platform is an embedded system with Android 10. It contains system- required commands and drivers ready. AIM-Android10 is developed for Advantech devices based on formal Android10. It is customized to satisfy users’ requirements and to add new functions and features.

4.2 Android 10 Software Support

4.2.1 System Default Software

AIM-Android10 support below functions as default including:  Chromium  ADB debugging support  Demo serial port utility  Kiosk Setting  Android agent (Device manager)

4.2.2 Other Applications

Many other applications for arm supported by Android or other resource web sites. You can search and download them from internet by yourself.

4.3 Install Android Software

TPC-100W supports boot from SD card or onboard flash. This section will guide you how to build an image for TPC-100W Android system boot media.

4.3.1 Create a Bootable SD Card

Please follow the steps below to create an SD card (not less than8G) for boot up. (Note: The PC's free partition needs 10G or more) If your PC is Linux environment: 1. Prepare the Linux environment that can use “uncompress” and “dd” command. Below uses ubuntu as example. 2. Copy “AIM-Android-10-ARM_64-TPC-1XX_yyyy_mm_dd.zip” package to your PC /root/. 3. Insert one SD card into your PC and open "Terminal". Input your password. $sudo su # cd /root/ # unzip AIM-Android-10-ARM_64-TPC-1XX_yyyy_mm_dd.zip

43 TPC-100W Series User Manual

Check the SD card location, like/dev/sdb 4. Then insert the SD card to TPC-100W and power up. Now, it should boot up with an Ubuntu environment. If your PC is Windows 10: 1. Unzip the AIM-Android-10-ARM_64-TPC-1XX_yyyy_mm_dd.zip. (Note: The PC's free partition need 10G or more) 2. Use the rufus to burn the image. #dd if=/root/AIM-Android-10-ARM_64-TPC-1XX_yyyy_mm_dd/eamb9918- sdcard_xxxxxxxx.img of=/dev/sdb bs=4096 #sync #eject /dev/sdb

TPC-100W Series User Manual 44 3. Then insert the SD card to TPC-100W and power up. Now, it should boot up with an Ubuntu environment. No matter you create SD card in Linux environment or Windows 10, you have to do below setting. 1. The DIP switch(SW2)needs to be adjusted to“1-off 2-on 3-on 4-off 5-off 6-off”. 2. You need to connect debug port and enter any key to stop uboot boot process to set the following command. 0: is for 1024x600 1: is for 1280x800 2: is for 1366x768 3: is for 1920x1080

4.3.2 Boot from eMMC

The TPC-100W Android image is in the SD card you create. (/root/AndroidImg). 1. Boot from SD card you create. 2. Perform the following command: 3. Please power off and remove the SD card. 4. The DIP switch(SW2)needs to be adjusted to“1-on 2-off 3-off 4-off 5-off 6-off”. 5. You need to connect debug port and enter any key to stop uboot boot process to set the following command. 0: is for 1024x600 1: is for 1280x800 2: is for 1366x768 3: is for 1920x1080 6. Waiting for the LCD interface to have a screen output (for the first time, the eMMC needs about 65s). Do not shut down during the waiting process, unplug the SD card, unplug the monitor or run the system command through the con- sole, otherwise the system may crash. #env default –a #setenv lvds_panel_mode 0 #saveenv #reset $sudo su #cd /root/AndroidImg #./burnEmmc.sh/dev/mmcblk2 #env default –a #setenv lvds_panel_mode 0 #saveenv #reset

45 TPC-100W Series User Manual

4.4 Serial Port Sample

After installing AIM-Android, you will see a Serial application in App list. Users can test serial port with it. 1. Choose the serial port mode. Settings → Network & internet → Select serial mode (com1)

• 232_mode
• 422_mode
• 485_mode 2. Start the application. The COM1(/dev/ttymxc0) support three modes:232mode,422mode,485mode. The COM2(/dev/ttymxc2) only support 485mode.

TPC-100W Series User Manual 46

4.5 Kiosk Setting

For Android Kiosk solution, Advantech provide a Kiosk Setting launch app, user can use this app to set any other android app as kiosk app. Kiosk app means it will run in full screen when boot up, navigate bar and status bar of android will hide.

4.5.1 Set the Kiosk Setting App as the Default Launcher

Just launch the Kiosk Setting app, the app can be the android default home app. When Kiosk Setting app starts for the first time, you can see the following screen. Please set the password of kiosk mode according to the prompt information in the dialog box. After input, click "SUBMIT" button to enter the app main interface.

47 TPC-100W Series User Manual

4.5.2 Set App as Kiosk App

First, click the "Chromium" icon in the main interface, and then click the "lock & launch" button to set the Chromium app as kiosk app.

TPC-100W Series User Manual 48

4.5.3 Exit Kiosk App

If you want to exit the kiosk app, you need to long press the “EXIT KIOSK” on the screen and enter the password for setting the kiosk mode before. After long pressing the “EXIT KIOSK” on the screen, the following dialog box will appear to ask for the password. After entering the password, click "CONTINUE" but - ton to return to the Kiosk Setting app interface.

49 TPC-100W Series User Manual

4.5.4 Set WebView as Kiosk App

Click the "WebStation setup" and input the URL. Click the "WebStation" icon in the main interface, and then click the "lock & launch" button to set the Chromium app as kiosk app.

TPC-100W Series User Manual 50

4.5.5 Show System App

Click the "Show system apps" icon in the main interface.

51 TPC-100W Series User Manual

4.5.6 Exit Kiosk Setting

Click the "Exit" in the main interface and input the password.

TPC-100W Series User Manual 52

TPC-100W Series User Manual 54 A.1 M.2 Slot (E-Key)  8.5mm half size 75 Pin M.2 slot (E-Key) Pin Signal Description Pin Signal Description 1 GND 2 +3.3V

3 USB+ USB serial data

to the USB 2.0 speci- fication 4 +3.3V

5 USB- 6 Reserved NC

7 GND 8 PCM_BCLK PCM is another 4 wire

interface, very similar to I2S, which can sup- port a more flexible protocol. It has bit clock (BCLK) and sync (SYNC) lines that are used to syn- chronise the link while the Tx and Rx lines are used to transmit and receive the audio data.

9 SDIO_CLK

Output, a type of Secure Digital card interface. It can be used as an interface for input or output devices.

10 PCM_SYNC

11 SDIO _CMD 12 PCM_OUT

13 SDIO _DATA0 14 PCM_IN

15 SDIO _DATA1 16 Reserved NC

17 SDIO _DATA2 18 GND

19 SDIO _DATA3 20 Reserved NC

21 SDIO _WAKE# 22 Reserved NC

23 SDIO _RESET#

33 GND 32 Reserved NC

35 Reserved NC 34 Reserved NC

37 Reserved NC 36 Reserved NC

39 GND 38 Reserved NC

41 Reserved NC 40 Reserved NC

43 Reserved NC 42 Reserved NC

45 GND 44 Reserved NC

47 Reserved NC 46 Reserved NC

49 Reserved NC 48 Reserved NC

51 GND 50 SYSCLK

53 Reserved NC 52 RESET# Functional reset to

55 Reserved NC 54 Reserved NC

57 GND 56 Reserved NC

59 Reserved NC 58 I2C_DATA

61 Reserved NC 60 I2C_CLK

63 GND 62 Reserved NC

65 Reserved NC 64 Reserved NC

67 Reserved NC 66 Reserved NC

69 GND 68 Reserved NC

71 Reserved NC 70 Reserved NC

73 Reserved NC 72 +3.3V 75 GND 74 +3.3V

55 TPC-100W Series User Manual

A.2 COM Port  9-Pin Com Port Connector (COM1)  9-Pin Com Port Connector (COM2/CAN) Pin RS232 RS422 RS485 1 - D-

2 RX RX- D+

3 TX TX+ -

5 GND GND GND

7 RTS TX- -

8 CTS - -

1 D- -

2 D+ -

5 GND -

8 - GND (isolation) 9 - H

TPC-100W Series User Manual 56 CAN BUS Pin define COM2 Pin define CAN BUS terminal (CN2) COM2 terminal (CN4) CN2 (1-2) CN2 (2-3) 120 ohm terminal default CN4 (1-2) default CN4 (2-3) 120 ohm terminal

57 TPC-100W Series User Manual

www.advantech.com Please verify specifications before quoting. This guide is intended for reference purposes only. All product specifications are subject to change without notice. No part of this publication may be reproduced in any form or by any means, such as electronically, by photocopying, recording, or otherwise, without prior written permission from the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd. 2023