TPB_V01 TOPPOWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

www.gztoppower.com TEL:0086-20-62162688 EMAIL:sales2@gztoppower.com page 1 of 2 TPB Series DESCRIPTION: TPB Series are specially designed for 3KVDC isolation & regulated single output application, the input voltage range within±5%, regulated output with very low ripple noise. 2W 3KVDC Isolation Regulated Single Output DC/DC Converters All specifications typical at TA=25°C, nominal input voltage and rated output current unless otherwise specified. COMMON SPECIFICATIONS Parameter Conditions Min. Typ. Max. Units Storage humidity 95 % Operating temperature Derating if the temperature ≥85°C -40 105 ℃ Storage temperature -55 125 ℃ Temp. rise at full load 40 58 ℃ Lead temperature 1.5mm from case for 10 seconds 300 ℃ Short circuit protection Continuous Cooling air convection Case material Plastic(UL94-V0) MTBF 3500 K hours Weight 2.8 g OUTPUT SPECIFICATIONS Parameter Conditions Min. Typ. Max. Units Output power 0.2 2 W Line regulation High VIN to low VIN (voltage variation +/-5%) ±0.5 % Load regulation 10% to100% load ±1.5 % Output voltage accuracy 100% full load ±3 % Temperature drift 100% full load 0.03 %/℃ Ripple 20MHz Bandwidth 20 30 mVp-p Noise 20MHz Bandwidth 50 150 mVp-p

FEATURES

SIP package 3KVDC isolation Operating temperature:-40 to ℃ 105 ℃ Regulated single output Continuous short circuit protection RoHS compliance 、CE certification SELECTION GUIDE Part Number Input Output Efficiency（%） Voltage（VDC） Voltage（VDC) Current（mA) Nominal Range Max Min TPB0505S 5 4.75-5.25 5 400 40 70 TPB0512S 5 4.75-5.25 12 150 15 71 TPB1205S 12 11.40-12.60 5 400 40 70 TPB1212S 12 11.40-12.60 12 150 15 71 TPB1215S 12 11.40-12.60 15 133 13 72 TPB1512S 15 14.25-15.75 12 150 15 71 TPB1505S 15 14.25-15.75 5 400 40 71 TPB2405S 24 22.8-25.2 5 400 40 71 TPB2412S 24 22.8-25.2 12 150 15 71 TPB2415S 24 22.8-25.2 15 133 13 74 Add suffix “P” for continuous short circuit protection, for example TPB0505SP. TOPPOWER

www.gztoppower.com TEL:0086-20-62162688 EMAIL:sales2@gztoppower.com page 2 of 2 TPB Series All dimensions in mm ±0.025.All pins on a 2.54mm pitch. Weight: 2.8g ISOLATION CHARACTERISTICS Parameter Conditions Min. Typ. Max. Units Isolation voltage Tested for 1 minute and 1mA max 3000 VDC Isolation resistance Test at 1000VDC 1 GΩ TEMPERATURE DERATING GRAPHS RECOMMENDED FOOTPRINT DETAILS APPLICATION NOTE Requirement on output load To ensure this module can operate efficiently and reliably, During operation, the minimum output load could not be less than 10% of the full load. If the actual output power is very small, please connect a resistor with proper resistance at the output end in parallel to increase the load, or us e our company ’s products with a lower rated output power. MECHANICAL DIMENSIONS PIN CONNECTIONS

7 PIN SIP

All dimensions in mm ±0.25.All pins on a 2.54mm pitch. 4 HOLES1.00 1.15 2.54 2.54 12.70 2.54 YYWW TPB0505S 19.50 0.55 0.45 1 24 6 2.00 7.50 10.00 0.55 0.45 4.60 3.60 1.25 0.30 0.20 bottom view TOPPOWER 9.30 12.43 0.50 5.00 18.00 All dimensions in mm ±0.25mm Tube Quantit y : 25PCS 3.0 2.0 1.0 -40 0 50 100 150 Output Power(W) Ambient Temperature(°C) 85°C Safe Operating Area 105 TOPPOWER