TPAS10G_17 TOTAL-POWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Total Power International, Inc. CHASSIS-MOUNT UNIVERSAL INPUT AC-DC GREEN POWER ENCAPSULATED MODULAR POWER SUPPLIES 10 WATTS MULTIPLE OUTPUT TPAS10G-S &TPAS10-D/T SERIES FEATURES: „ CHASSIS-MOUNT AC/DC MODULAR POWER SUPPLIES „ UNIVERSAL AC INPUT RANGE „ GREEN POWER DESIGN „ MEET UNIVERSAL SAFETY STANDARDS „ EMI MEETS CISPR PUB.22/FCC CLASS B „ CE MARKING COMPLIANCE GENERAL SPECIFICATION Efficiency: 70-80% typical various with output voltage. Switching Frequency: 80K Hz. Circuit Topology: Fixed Frequency Flyback circuit. Transient Response: Peak deviation on 70mV , Recovery time <0.2mSec.@ 25%step load change. Case: Impact resistant thermo-plastic enclosure. Safety Standard: EN60950-1/ UL60950-1 Class I. Power Density: 1.22 Watts. / Cubic inch. Operating Temperature: 0°C to +50°C range. @ full load without derating. From+50°C derating linearly to half load @+70°C (Refer to the Derating Chart). Storage Temperature: -20°C to +85°C. Temperature Coefficient: ±0.03% /°C. Cooling: Convection cooling for +50°C @ full load. Commercial Grade only. NOTE: (1) All measurements are at nominal input, full load, and +25°C unless otherwise specified. (2) Load Regulation measured from Full-Load (F-L) to Half-Load (H-L) at nominal input and others loaded at half load. Total Power International, Inc. Toll Free: 877-646-0900(US) PH# (978) 453-7272 www.total-power.com SPECIFICATION INPUT SPECIFICATION Input Voltage: 90-264Vac typical. Input Frequency: 47-63 Hz. (Nominal 50/60Hz.). Input Current: 0.16A @115Vac./0.1A @230Vac typical. Inrush Current: 4.2Arms@230Vac typical. Input Fuse: Use external fuse. Dielectric Withstand: Meet IEC60950-1. 3,000Vac-Output/Input. 1,500Vac-Input/GND. 500Vac-Output/GND. EMI: Meet CISPR PUB. 22/FCC Class B. Hold-up time: Typ. 22.4 mS @115Vac, 130mS @230Vac. Green Power: 0.25W@132Vac, 0.51W@230Vac for single. Earth Leakage: Less than 0.16mA @230V ac. Remote ON/OFF: ON(Enable)=Open. OFF(Disable)=Short. OUTPUT SPECIFICATION Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Wattage: 10 Watts typical. Line Regulation: Various with output voltage. Typ.±0.1% . Load Regulation: Various with output voltage. Main VO1 ± 0.1-2.0% typical. Aux.VO2 ± 0.7-1.2% typical. Aux.VO3 ± 0.1% typical. Total Regulation: 0.1-1.9% typical. Noise & ripple: 1.0% typical peak to peak. T y p . 1 0 0 m V f o r 3 . 3 V / 5 v . OVP: Built-in on main output VO1. Adjustability: Available at main output VO1. Overload Protection (OLP): Fully protected against output overload and short circuit. Typical 125-150% of rating output load. Con2sult the factory for special OLP setting.

OUTPUT VOLTAGE/ CURRENT RATINGS CHART MECHANICAL DIMENSIONS: MM [INCHES] WEIGHT: 177.5g (6.26 Oz.) DERATING CHART DUAL OUTPUT VO1 ★@ VO2● MODEL NO. TYP. VOLT. TYP VOLT. TPAS10-D050E 1.00A +5V 1.00A -5V TPAS10-D050I 1.00A +5V 0.42A +12V TPAS10-D120I 0.42A +12V 0.42A -12V TPAS10-D150K 0.34A +15V 0.34A -15V TPAS10-D033E 1.51A +3.3V 1.00A -5V SINGLE OUTPUT VO1 ★@ MODEL NO. TYP. VOLT. TPAS10G-S033250 2.50A +3.3V TPAS10G-S050200 2.00A +5.0V TPAS10G-S090111 1.11A +9.0V TPAS10G-S120085 0.85A +12.0V TPAS10G-S150067 0.67A +15.0V TPAS10G-S240041 0.41A +24.0V TRIPLE OUTPUT TPAS10-T033II 1.51A +3.3V 0.10A +12V 0.10A -12V TPAS10-T050II 1.50A +5.0V 0.10A +12V 0.10A -12V TPAS10-T050KK 1.40A +5.0V 0.10A +15V 0.10A -15V Note: (1) Max. (maximum load) is the continuous operating load of each rail, but the max. load of each rail can not be drawn from all outputs at the same time. PIN ASSIGNMENT PIN NO. SINGLE O/P DUAL O/P(-VO2) DUAL O/P(+VO2) TRIPLE O/P P1-1 L L L L P1-3 N N N N P1-2 G G G G P2-1 REMOTE ON/OFF REMOTE ON/OFF REMOTE ON/OFF REMOTE ON/OFF P2-2 DC COM VO2 DC COM +VO1RET P2-3 DC COM DC COM DC COM +VO1 P2-4 VO1 DC COM VO1 +VO3 P2-5 VO1 VO1 VO2 DC COM P2-6 NC NC NC VO2