DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

FENG-JUI TECHNOLOGY CO., LTD SMD POWER INDUCTOR -RoHS Your Perfect Inductor Rev. 1801 TP / TP-B TYPE

  • FEATURE 1. High current capacity 2. Large terminal surface for good PCB bonding
  • Applications 1. DC-DC converter or LCD TV and others
  • Shape and Dimension ●Schematics and Land Patterns(mm)
  • Specification Dimension in m/m TYPE A B C E d2 F Note1. Measurement frequency of Inductance value : at 100KHz, 0.25V Note2. Measurement ambient temperature of L, DCR and IDC : at 25℃ Note3. IDC : This indicates the value of current when the inductances is 10% lower than its initial value at D.C. superimposition (Ta=20℃) Note4. Inductance tolerance: M: ±20% ; K: ±10% Note5. Ordering Code: TYPE NAME: TP0504 Main Inductance: 100 (10uH) Tolerance : M (±20%) Note6. Packaging: Taping E F

FENG-JUI TECHNOLOGY CO., LTD SMD POWER INDUCTOR -RoHS Your Perfect Inductor Rev. 1801 Part No. Inductance(uH) TP03015B TP0302B TP0403B 1R5 1.5 0.078 / 2.08 2R7 2.7 0.052 / 2.43 3R9 3.9 0.076 / 1.98 6R3 6.3 8R0 8.0 8R2 8.2 0.132 / 1.26 120 12 0.210 / 1.05 180 18 0.500 / 0.80 0.338 / 0.84 270 27 0.912 / 0.70 0.522 / 0.71 390 39 0.587 / 0.59 560 56 0.937 / 0.50 820 82 2.319 / 0.20 1.345 / 0.45 121 120 4.084 / 0.17 1.800 / 0.43 181 180 5.35 / 0.075 3.200 / 0.38 221 220 6.669 / 0.07 3.400 / 0.36 331 330 8.684 / 0.06 5.300 / 0.28 471 470 13.09 / 0.06 6.800 / 0.21 681 680 10.00 / 0.18 821 820 13.40 / 0.15 102 1000

FENG-JUI TECHNOLOGY CO., LTD SMD POWER INDUCTOR -RoHS Your Perfect Inductor Rev. 1801 Part No. Inductance(uH) TP0502B TP0504B TP0703B TP0705B 2R0 2.0 3R0 3.0 3R9 3.9 5R6 5.6 0.054 / 2.31 6R3 6.3 8R0 8.0 471 470 9.282 / 0.10 1.960 / 0.34 681 680 14.040 / 0.10 821 820 102 1000

FENG-JUI TECHNOLOGY CO., LTD SMD POWER INDUCTOR -RoHS Your Perfect Inductor Rev. 1801 TP1004 TP1005 TP1006 1R0 1.0 2R0 2.0 2R7 2.7 3R0 3.0 3R3 3.3 3R9 3.9 5R6 5.6 0.040 / 5.00 6R3 6.3 6R8 6.8 8R0 8.0 8R2 8.2 681 680 2.250 / 0.28 2.45 / 0.50 821 820 2.550 / 0.24 102 1000

FENG-JUI TECHNOLOGY CO., LTD SMD POWER INDUCTOR -RoHS Your Perfect Inductor Rev. 1801 GENERAL CHARACTERISTICS 1. Operating temperature range: -40 TO + 105℃(Includes temperature when the coil is heated) 2. External appearance: On visual inspection, the coil has no external defects. 3. Terminal strength: After soldering. Between copper plate and terminals of coil. Push in two directions of X.Y withstanding at below conditions. Terminal should not peel off. (refer to figure at right) 10. 0N 10 sec. 4. Insulating resistance: Over 100MΩ at 100V D.C. between coil and core. 5. Dielectric strength: No dielectric breakdown at 100V D.C. for 1 minute between coil and core. 6. Temperature characteristics: Inductance coefficient (0~2,000)x10-6/℃(-25~+80℃). 7. Humidity characteristics(Moisture Resistance): Inductance deviation within ±5%, after 96 hours in 90~95% relative humidity at 40 ±2℃and 1 hour drying under normal condition. 8. Vibration resistance: Inductance deviation within ±5%, after vibration for 1 hour. In each of three orientations at sweep vibration (10~55~10 Hz) with 1.5mm P-P amplitudes. 9. Shock resistance: Inductance deviation within ±5%, after being dropped once with 981m/s2 (100G) shock attitude upon a rubber block method shock testing machine, in three different orientations. 10. Resistance to Soldering Heat: 260℃, 10 seconds(See attached recommend reflow) 11. Storage environment: Storage condition: Temperature Range: 10℃ ~ 35℃ (Generally: 21℃ ~ 31℃) , Humidity Range: 50% ~ 80% RH (Generally: 65% ~ 75%) ; Transportation condition: Temperature Range: -35℃ ~ 85℃ , Humidity Range: 50% ~ 95% RH 12. Use components within 12 months. If 12 months or more have elapsed, check solderability before use. 13. Reflow profile recommend: 260 ℃ 230 ℃ 300 250 200 150 100 T( ℃ ) T(s 300240180120600 Lead-free heat endurance test 245 ℃ Peak 230 ℃ 170 ± 10℃ ,6 0-120S 300 250 200 150 100 T( ℃ ) T(s) 300240180120600 Lead-free the recom m ended refl ow condi ti on