DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

The AEC-Q101 qualified TP6KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

Description

Parameter Symbol Value Unit Peak Pulse Power Dissipation by 10/1000μs Test Waveform (Fig.2) (Note 1) P PPM 600 W Steady State Power Dissipation on Infinite Heat Sink at T L=75ºC (Fig. 6) PD 5.0 W Peak Forward Surge Current, 8.3ms Single Half Sine Wave Unidirectional Only (Note 2) I FSM 100 A Maximum Instantaneous Forward Voltage at 50A for Unidirectional Only V F 3.5 V Operating Junction and Storage Temperature Range T J, TSTG -55 to 175 °C Typical Thermal Resistance Junction to Lead R uJL 20 °C/W Typical Thermal Resistance Junction to Ambient R uJA 75 °C/W Notes: 1 . Non-repetitive current pulse, per Fig. 4 and derated above TJ (initial) = 25OC per Fig. 3. 2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per minute maximum. Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted) Agency Approvals

  • Hi reliability application and automotive grade AEC-Q101 qualified
  • Glass passivated chip junction in DO-15 Package
  • 600W peak pulse capability at 10/1000μs waveform, repetition rate (duty cycles):0.01%
  • Fast response time: typically less than 1 .0ps from 0 Volts to BV min
  • Excellent clamping capability Typical f ailure mode is short from over-specified voltage or current Whisker test is conducted based on JEDEC JESD20 1A per its table 4a and 4c
  • IEC-610 00-4-2 ESD 30kV(Air), 30kV (Contact)
  • ESD protection of data lines in accordance with IEC 61 000-4-2 (IEC801-2)
  • EFT protection of data lines in accordance with IEC 61 000-4-4 (IEC801-4)
  • Lo w incremental surge resistance
  • High temperature to refl ow soldering guaranteed: 260°C/40sec / 0.375” ,(9.5mm) lead length, 5 lbs., (2.3kg) tension VBR @ TJ= VBR@25°C x (1+αT x (TJ - 25)) (αT :Temperature Coefficient, typical value is 0.1%) Plastic package has under writers laboratory flammability classification 94V-O Lead-free mat te tin plated package
  • Halogen free and RoHS compliant TP6KE Series Functional Diagram Bi-directional Uni-directional Cathode Anode Bi-directional Uni-directional RoHS Pb e3

Axial Leaded – 600W > TP6KE series ©2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 04/08/15 Electrical Characteristics (TA=25°C unless otherwise noted) Part Number (Uni) Part Number (Bi) Reverse Stand off Voltage VR (Volts) Breakdown Voltage VBR (Volts) @ IT Test Current IT (mA) Maximum Clamping Voltage VC @ Ipp (V) Maximum Peak Pulse Current Ipp (A) Maximum Reverse Leakage IR@ VR (µA) Agency Approval MIN MAX For parts without A , the VBR is ± 10% and VC is 5% higher than with A parts I-V Curve Characteristics Vc VBR VR IR IT Ipp V Uni-directional VF Vc VBR VR IR IT Ipp V VcVBRVR Ipp IR IT Bi-directional PPPM Peak Pulse Power Dissipation -- Max power dissipation VR Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation VBR Breakdown Voltage -- Maximum voltage that flows though the TVS at a specified test current (IT) VC Clamping Voltage -- Peak voltage measured across the TVS at a specified Ippm (peak impulse current) IR Reverse Leakage Current -- Current measured at VR VF Forward Voltage Drop for Uni-directional

Axial Leaded – 600W > TP6KE series ©2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 04/08/15 Physical Specificationst Weight 0.015oz., 0.4g Case JEDEC DO-204AC (DO-15) molded plastic body over passivated junction. Polarity Color band denotes the cathode except Bipolar. T erminal Matte Tin axial leads, solderable per JESD22-B102. Dimensions D A A C B Cathode Band (for Uni-directional products only) DO-204AC (DO-15) Flow/Wave Soldering (Solder Dipping) Peak T emperature : 265OC Dipping Time : 10 seconds Soldering : 1 time Dimensions Inches Millimeters Min Max Min Max A 1 .000 - 25.40 - B 0.230 0.300 5.80 7 .60 C 0.028 0.034 0.71 0.86 D 0.104 0.140 2.60 3.60 Environmental Specifications High T emp. Storage JESD22-A103 HTRB JESD22-A108 T emperature Cycling JESD22-A104 H3TRB JESD22-A101 RSH JESD22-B106 100 120 11 0 100 IFSM -P eak Forward Surve Current(A) Number of Cycles at 60 Hz Figure 7 - Maximum Non-Repetitive Peak Forward Surge Current Uni-Directional Only

Axial Leaded – 600W > TP6KE series ©2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 04/08/15 Part Numbering System Packaging Part Number Component Package Quantity Packaging Option Packaging Specification TP6KExxxXX DO-204AC 4000 Tape & Reel EIA STD RS-296 TP6KExxxXX-B DO-204AC 1000 BULK Littelfuse Spec. OPTION CODE: BLANK Reel Tape -B Bulk Packaging SERIES CODE TP6KE xxxXX X TYPE CODE: A Uni-Directional (5% VBR Voltage Tolerance) CA Bi-Directional (5% VBR Voltage Tolerance) VBR VOLTAGE CODE (Refer to the Electrical Characteristics table) Part Marking System F TP6KEXXX YYWW Trace Code Marking YY:Year Code WW: Week Code Product Type Littelfuse Logo Cathode Band (for Uni-directional products only) T ape and Reel Specification 0.197+/-0.020 2.75 0.047 (330.2) Recess Depth Max. 0.75 (19.05) Off Center either side 0.028(0.7) Dimensions are in inches/mm 0.236 (65.0) (5.0+/- 0.5) (53.0+2.0/-1.0) (6.0)(1.2) (69.85) 13.0 (76.2) 3.0 0.68 (17.27) Direction of Feed