DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

The AEC-Q101 qualified TP6KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

Description

Parameter Symbol Value Unit Peak Pulse Power Dissipation by 10/1000μs Test Waveform (Fig.2) (Note 1) PPPM 600 W Steady State Power Dissipation on Infinite Heat Sink at TL=75ºC (Fig. 6) PD 5.0 W Peak Forward Surge Current, 8.3ms Single Half Sine Wave Unidirectional Only (Note 2) IFSM 100 A Maximum Instantaneous Forward Voltage at 50A for Unidirectional Only VF 3.5 V Operating Junction and Storage Temperature Range TJ, TSTG -55 to 175 °C Typical Thermal Resistance Junction to Lead RuJL 20 °C/W Typical Thermal Resistance Junction to Ambient RuJA 75 °C/W Notes: 1 . Non-repetitive current pulse, per Fig. 4 and derated above TJ (initial) = 25OC per Fig. 3. 2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per minute maximum. Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted) Agency Approvals

  • Hi reliability application and automotive grade AEC-Q101 qualified
  • Glass passivated chip junction in DO-15 Package
  • 600W peak pulse capability at 10/1000μs waveform, repetition rate (duty cycles):0.01%
  • Fast response time: typically less than 1 .0ps from 0 Volts to BV min
  • Excellent clamping capability
  • Typical failure mode is short from over-specified voltage or current
  • Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c
  • IEC-61000-4-2 ESD 30kV(Air), 30kV (Contact)
  • ESD protection of data lines in accordance with IEC 61000-4-2
  • EFT protection of data lines in accordance with IEC 61000-4-4
  • Low incremental surge resistance
  • High temperature soldering guaranteed: 260°C+5/-0°C / 10s ±1sec / 0.375” ,(9.5mm) lead length, 5 lbs., (2.3kg) tension
  • VBR @ TJ= VBR@25°C x (1+αT x (TJ - 25)) (αT :Temperature Coefficient, typical value is 0.1%)
  • Plastic package is flammability rated V-0 per Underwriters Laboratories
  • Lead-free matte tin plated package
  • Halogen free and RoHS compliant
  • Pb-free E3 means 2nd level interconnect is Pbfree and the terminal finish material is tin(Sn) (IPC/JEDEC J-STD- 609A.01) TP6KE Series Functional Diagram Bi-directional Uni-directional Cathode Anode Bi-directional Uni-directional RoHS Pb e3

© 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/10/16 Axial Leaded – 600W > TP6KE series Electrical Characteristics (TA=25°C unless otherwise noted) Part Number (Uni) Part Number (Bi) Reverse Stand off Voltage VR (Volts) Breakdown Voltage VBR (Volts) @ IT Test Current IT (mA) Maximum Clamping Voltage VC @ Ipp (V) Maximum Peak Pulse Current Ipp (A) Maximum Reverse Leakage IR@ VR (µA) Agency Approval MIN MAX I-V Curve Characteristics Vc VBR VR IR IT Ipp V Uni-directional VF Vc VBR VR IR IT Ipp V VcVBRVR Ipp IR IT Bi-directional PPPM Peak Pulse Power Dissipation -- Max power dissipation VR Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation VBR Breakdown Voltage -- Maximum voltage that flows though the TVS at a specified test current (IT) VC Clamping Voltage -- Peak voltage measured across the TVS at a specified Ippm (peak impulse current) IR Reverse Leakage Current -- Current measured at VR VF Forward Voltage Drop for Uni-directional

© 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/10/16 Axial Leaded – 600W > TP6KE series Physical Specificationst Weight 0.015oz., 0.4g Case JEDEC DO-204AC (DO-15) molded plastic body over passivated junction. Polarity Color band denotes the cathode except Bipolar. T erminal Matte Tin axial leads, solderable per JESD22-B102. Dimensions D A A C B Cathode Band (for Uni-directional products only) DO-204AC (DO-15) Flow/Wave Soldering (Solder Dipping) Peak T emperature : 260°C+5/-0°C Dipping Time : 10s ±1 seconds Soldering : 1 time Dimensions Inches Millimeters Min Max Min Max A 1 .000 - 25.40 - B 0.230 0.300 5.80 7 .60 C 0.028 0.034 0.71 0.86 D 0.104 0.140 2.60 3.60 Environmental Specifications High T emp. Storage JESD22-A103 HTRB JESD22-A108 T emperature Cycling JESD22-A104 H3TRB JESD22-A101 RSH JESD22-B106 100 120 11 0 100 IFSM -P eak Forward Surve Current(A) Number of Cycles at 60 Hz Figure 7 - Maximum Non-Repetitive Peak Forward Surge Current Uni-Directional Only

© 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/10/16 Axial Leaded – 600W > TP6KE series Part Numbering System Packaging Part Number Component Package Quantity Packaging Option Packaging Specification TP6KExxxXX DO-204AC 4000 Tape & Reel EIA STD RS-296 TP6KExxxXX-B DO-204AC 1000 BULK Littelfuse Spec. OPTION CODE: BLANK Reel Tape -B Bulk Packaging SERIES CODE TP6KE xxxXXX TYPE CODE: A Uni-Directional (5% VBR Voltage Tolerance) CA Bi-Directional (5% VBR Voltage Tolerance) VBR VOLTAGE CODE (Refer to the Electrical Characteristics table) Part Marking System F TP6KEXXX YYWW Trace Code Marking YY:Year Code WW: Week Code Product Type Littelfuse Logo Cathode Band (for Uni-directional products only) T ape and Reel Specification 0.197+/-0.020 2.75 0.047 (330.2) Recess Depth Max. 0.75 (19.05) Off Center either side 0.028(0.7) Dimensions are in inches/mm 0.236 (65.0) (5.0+/- 0.5) (53.0+2.0/-1.0) (6.0)(1.2) (69.85) 13.0 (76.2) 3.0 0.68 (17.27) Direction of Feed