TP5.0SMDJ UNSEMI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 6

Technical content

Features

Description

Revision March 1,2022 Surface Mount Transient Voltage Suppressors www.unsemi.com.tw

10 To 58V 5000W

www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.1/5 Mechanical Data  Case: Molded plastic  Epoxy: UL 94V-0 rate flame retardant  Lead: Solderable per MIL-STD-750, method 2026  Polarity: Color band denotes cathode end except Bipolar  Mounting position: Any  Glass passivated chip  5000W peak pulse power capability with a 10/1000μs waveform, repetitive rate (duty cycle):0.01%  High reliability application and automotive grade AEC Q101 qualified  Meet ISO 7637-2 load dump test (varied by test condition)  Low leakage  Uni and Bidirectional unit  Excellent clamping capability  Very fast response time  Plastic package has Underwriters Laboratory Flammability 94V-0  Halogen free and RoHS compliant

Applications

TVS devices are ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuits used in Telecom, Computer, Industrial and Consumer electronic applications. Note: (1)Non-repetitive current pulse per Fig.5 and derated above TA= 25℃per Fig.1 (2)Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum Maximum Ratings and Thermal Characteristics(TA=25℃ unless otherwise noted) 5000 6.5 See Next Table - 55 to +150 - 55 to +150 3.5 300 PPPM PD IPP TJ , TSTG TOP VF IFSM Peak power dissipation with a 10/1000μs waveform(1) Power Dissipation on Infinite Heat Sink at TL=75°C Peak pulse current with a 10/1000μs waveform(1) Junction and storage temperature range Operating temperature range Maximum Instantaneous Forward Voltage at 50A for Unidirectional Peak forward surge current, 8.3 ms single half sine-wave unidirectional only (2) W W A V A Parameter Symbol Value Unit Uni-directional Bi-directional

VRWM (V) Breakdown Voltage VBR (V) @IT Maximum Clamping Voltage VC @IPP (V) Maximum Peak Pulse Current IPP (A) Maximum Reverse Leakage IR @VRWM (μA) Test Current IT (mA) MIN MAX Marking Uni Bi 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 19.0 20.0 22.0 24.0 26.0 28.0 30.0 33.0 36.0 40.0 43.0 45.0 48.0 51.0 54.0 58.0 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 30.8 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 TP5.0SMDJ10A TP5.0SMDJ11A TP5.0SMDJ12A TP5.0SMDJ13A TP5.0SMDJ14A TP5.0SMDJ15A TP5.0SMDJ16A TP5.0SMDJ17A TP5.0SMDJ18A TP5.0SMDJ19A TP5.0SMDJ20A TP5.0SMDJ22A TP5.0SMDJ24A TP5.0SMDJ26A TP5 0SMDJ28A TP5.0SMDJ30A TP5.0SMDJ33A TP5.0SMDJ36A TP5 0SMDJ40A TP5.0SMDJ43A TP5.0SMDJ45A TP5.0SMDJ48A TP5.0SMDJ51A TP5.0SMDJ54A TP5.0SMDJ58A TP5.0SMDJ10CA TP5.0SMDJ11CA TP5.0SMDJ12CA TP5.0SMDJ13CA TP5.0SMDJ14CA TP5.0SMDJ15CA TP5.0SMDJ16CA TP5.0SMDJ17CA TP5.0SMDJ18CA TP5.0SMDJ19CA TP5.0SMDJ20CA TP5.0SMDJ22CA TP5.0SMDJ24CA TP5.0SMDJ26CA TP5.0SMDJ28CA TP5.0SMDJ30CA TP5.0SMDJ33CA TP5.0SMDJ36CA TP5.0SMDJ40CA TP5.0SMDJ43CA TP5.0SMDJ45CA TP5.0SMDJ48CA TP5.0SMDJ51CA TP5.0SMDJ54CA TP5.0SMDJ58CA 5SAE 5SAF 5SAG 5SAK 5SAM 5SAP 5SAR 5SAT 5SAV 5SAX 5SAZ 5SBE 5SBF 5SBG 5SBK 5SBM 5SBP 5SBR 5SBT 5SBV 5SBX 5SBZ 5SCE 5SCF 5SCG 5DAE 5DAF 5DAG 5DAK 5DAM 5DAP 5DAR 5DAT 5DAV 5DAX 5DAZ 5DBE 5DBF 5DBG 5DBK 5DBM 5DBP 5DBR 5DBT 5DBV 5DBX 5DBZ 5DCE 5DCF 5DCG 11.10 12.20 13.30 14. 40 15.60 16.70 17.80 18.90 20.00 21.10 22.20 24.40 26.70 28.90 31.10 33.30 36.70 40.00 44.40 47.80 50.00 53.30 56.70 60.00 64.40 12.30 13.50 14.70 15.90 17.20 18.50 19.70 20.90 22.10 23.30 24.50 26.90 29.50 31.90 34.40 36.80 40.60 44.20 49.10 52.80 55.30 58.90 62.70 66.30 71.20 294.12 275.0 252.0 233.0 216.0 205.0 193.0 181.0 172.0 162.4 155.0 141.0 129.0 119.0 110.0 103.0 93.9 86.1 77.6 72.1 68.8 64.7 60.7 57.5 53.5 TP5.0SMDJ Series Surface Mount Transient Voltage Suppressors Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Electrical Characteristics (@25℃ Unless Otherwise Specified) Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.2/5 Note: (1) Add suffix 'C 'or ' CA ' after part number to specify Bi-directional devices (2) For Bi-Directional devices having VR of 10 volts and under, the IR limit is double

TP5.0SMDJ Series Surface Mount Transient Voltage Suppressors Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.3/5 Ratings and Characteristic Curves (TA=25°C unless otherwise noted) Figure 2 - Pulse Derating CurveFigure 1 - Pulse Waveform T - Time (ms) Half Value IPPM (IPPM/2) 10/1000µsec. Waveform as defined by R.E.A Peak Value IPPM TR=10µsec TJ=25°C Pulse Width(td) is defined as the point where the peak current decays to 50% of IPPM 0 1.0 2.0 3.0 4.0 100 150IPPM - Peak Pulse Current, % IR SM Figure 4 - Steady State Power Derating CurveFigure 3 - Peak Pulse Power Rating Curve Lead Temperature , TL (℃) 0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 0 25 50 75 100 125 150 175 200 Steady State Power Dissipation, (W) Pulse Width ,t d (μs) 0.1 100 1000 1 10 100 1000 PPPM -Peak Pulse TA-Ambient temperature(°C) 0 25 50 75 100 125 150 175 100 Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage %

Revision March 1,2022 www.unsemi.com.tw Surface Mount Transient Voltage Suppressors ROHS For technical questions, contact: tech@unsemi.com.tw Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.4/5 TP5.0SMDJ Series Ratings and Characteristic Curves (TA=25°C unless otherwise noted) Part Numbering Figure 6 - Typical Junction CapacitanceFigure 5 - Maximum Non-Repetitive Surge Current T P 5 . 0 S M D J × × × C A 5% VBR Voltage Tolerance Uni/Bi-Directional VR Voltage Automotive Series Reverse Breakdown Voltage,VBR (V) 100 1000 10000 100000 1 10 100 Junction Capacitance,C J (pF) Uni-directinoal @VRWM TJ=25 °C f=1.0MHz Bi-directional @zero bias Uni-directional @zero bias Bi-directinoal@VRWM 100 150 200 250 300 1 100 Peak Forward Surge Current, (A) Number of Cycles at 60 Hz TJ=TJ max. 8.3ms Single Half Sine-Wave

Revision March 1,2022 www.unsemi.com.tw Surface Mount Transient Voltage Suppressors ROHS For technical questions, contact: tech@unsemi.com.tw Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.5/5 TP5.0SMDJ Series Lead–free assembly 150°C 200°C 60 -180 Seconds 3°C/second max 5°C/second max 217°C 60 -150 Seconds 260 +0/-5°C 20 - 40 Seconds 6°C/second max 8 minutes Max 260°C Reflow Condition Pre Heat -Temperature Min (Ts(min)) -Temperature Max (Ts(max)) - Time (min to max) (Ts) Average ramp up rate ( Liquidus Temp TL) to peak TS(max) to TL - Ramp-up Rate Reflow - Temperature (TL) (Liquidus) - Time (min to max) (TS) Peak Temperature (TP) Do not exceed Time 25°C to peak Temperature (TP) Time within 5°C of actual peak Temperature (TP) Ramp-down Rate Dimensions Dimensions Min Max MaxMin Inches Millimeters DO-214AB (SMC) Cathode Band A B C D E F G H I J K L 0.114 0.260 0.220 0.079 0.030 0.305 0.006 0.129 0.094 0.094 0.126 0.280 0.245 0.103 0.060 0.008 0.320 0.012 0.165 2.860 6.520 5.520 1.980 0.750 7.640 0.152 3.300 2.400 2.400 3.160 7.020 6.150 2.590 1.510 0.203 8.020 0.305 4.200 Ramp up TS(MAX) TS(MIN) Ramp down Time Temperature TP TL Critical Zone TL to TP TL Time 25℃ to peak Ts Preheat Tp

Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. Disclaimer ROHS UNSEMI RESERVES THE RIGHT TO MAKE CHANGE ON OUR PRODUTS , PRODUCTS SPECIFICATION AND DATA WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. UN SEMICONDUCTOR LIMITED its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “UNSEMI”)does not give any representations or warranties for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. In no event shall UNSEMI be liable for any indirect, incidental, punitive, special or consequential damages (including any and all implied warranties, warranties of fitness for particular purpose, non-infringement and merchantability.) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Statements regarding the suitability of products for certain types of applications are based on UNSEMI knowledge of typical requirements that are often placed on UNSEMI products in generic applications. Such statements are not binding, statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify UNSEMI's terms and conditions of purchase, including but not limited to the warranty expressed therein. Unless otherwise agreed in writing, UNSEMI product is not designed, authorized or warranted to be suitable for use in medical life-saving, or life-sustaining application , nor in applications where failure or malfunction of a UNSEMI product can reasonably be expected to result in personal injury, death or severe property or environmental damage. UNSEMI and its suppliers accept no liability for inclusion or use of UNSEMI products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. All referenced brands, product names, service names and trademarks are the property of their respective owners.