DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

TP5.0SMDJ Series www.anova-semi.com Revision: B Jun-01-2018 P . 1 Working Voltage: 10 to 58 V Peak Pulse Power: 5000 W Note: Very fast response time Surface Mount Transient Voltage Suppressors Features SMC/ DO-214AB Optimized glass passivated chip

5000 W peak pulse power capability with a

10/1000 μs waveform, repetitive rate (duty cycle):0.01 % High reliability application and automotive grade AEC Q101 qualified Low leakage Uni and Bidirectional unit Excellent clamping capability T j = 150 °C capability suitable for high reliability and automotive requirement Meet ISO 7637-2 load dump test (varied by test condition) RoHS compliant Mechanical Data Case: Molded plastic Maximum Ratings(TA=25℃ unless otherwise noted) Epoxy: UL 94V-0 rate flame retardant Lead: Solderable per MIL-STD-750, method 2026 Polarity: Color band denotes cathode end except Bipolar Mounting position: Any Parameter Symbol Value Unit Peak power dissipation with a 10/1000μs waveform(1) PPP 5000 W Peak pulse current wih a 10/1000μs waveform(1) IPP See Next Table A Power dissipation on infinite heatsink at TL = 50 °C P D 6.5 W 300 A Maximum instantaneous forward voltage at 100A for unidirectional only VF 3.5 V Peak forward surge current, 8.3 ms single half sine- wave unidirectional only(2) IFSM Operating junction and storage temperature range TJ, TSTG –55 to +150 °C (1)Non-repetitive current pulse per Fig.5 and derated above TA= 25 °C per Fig.1 (2)Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum

TP5.0SMDJ Series www.anova-semi.com Revision: B Jun-01-2018 P . 2 AMBIENT TEMPERATURE , (℃)AVERAGE FORWARD CURRENT, (A) 0 100 1 300 25 100 100 40 150 0 0 6.5 1 52 50 6.5 20 22 ## 0 1000 5.1 58 21 33 42.1 10 0.2 100 33 42 10 58 0.5 76 6160 4500 3000 1 50 10 33 42.1 58 22 1.5 33 20000 6000 4600 1500 2 23 10 33 42.1 58 3 13 3200 2300 4 10 Fig. 5 - Pulse Waveform Fig. 6 - Typical Junction Capacitance Ratings and Characteristics Curves (TA=25℃ unless otherwise noted) Fig. 1 - Pulse Derating Curve Fig. 2 - Maximum Non-Repetitive Surge Current Fig. 3 - Steady State Power Derating Curve Fig. 4 - Peak Pulse Power Rating Curve 0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 0 25 50 75 100 125 150 175 200 Steady State Power Dissipation, (W) Lead Temperature , TL (℃) 100 150 200 250 300 1 10 100 Peak Forward Surge Current, (A) Number of Cycles at 60 Hz TJ = TJ max. 8.3 ms Single Half Sine-Wave 100 0 25 50 75 100 125 150 175 200 Peak Pulse Derating in Percentage of Peak Power or Current, (%) Ambient Temperature ,TA (℃) 100 0 1 2 3 4 Peak Pulse Current , (% ) Time , (ms) TJ = 25 °C Pulse Width (td) is defined as the point where the peak current decays to 50 % of Ipp 10/1000 μsec. Waveform as defined by R.E.A. Peak Value (Ipp) Half Value = Ipp td Tr=10μs 0.1 100 1000 1 10 100 1000 Pulse Width ,td (μs) PPPM-Peak Pulse 100 1000 10000 100000 1 10 100 Junction Capacitance,CJ (pF) Reverse Breakdown Voltage,VBR (V) Uni-directional @VRWM TJ=25 °C f=1.0MHz Bi-directional @zero bias Uni-directional @zero bias Bi-directional @VRWM

TP5.0SMDJ Series www.anova-semi.com Revision: B Jun-01-2018 P . 3 Uni Bi Min (V) Max (V) IT (mA) Note: Electrical Characteristics(TA=25℃ unless otherwise noted) Part Number (Uni) Part Number (Bi) Device Marking Code Breakdown Voltage VBR @IT Maximum Reverse Leakage IR @VRWM (uA) Working Peak Reverse Voltage VRWM (V) Maximum Reverse Surge Current IPP (A) Maximum Clamping Voltage VC @IPP (V) 2. Add suffix 'C 'or ' CA ' after part number to specify Bi-directional devices 3. For Bi-Directional devices having VR of 10 volts , the IR limit is double