TP48-N-NDI

TP48NNDI WEIDMULLER | Alldatasheet

Document overview

• PDF pages: 12

Technical content

W eidmuller,Ca nada 10Spy C ourt Ma rkham ,On tario L3R 5H6 Telephone:(800)268-4080 Facsimile:(905)475-2798 Email:info1@w eidmuller.ca W ebsite:w ww .weidmuller.ca Me xico We idmuller,Mex ico Blvd.H erman os Serdán 698 Col.San Ra faelO riente Pueb la,P uebla,Mex ico C.P. 72029 Telephone:01222 2686267 Facsimile:01222 2686219 Email:clientes@ weidmu ller.com.mx We bsite:www .weidmu ller.com.mx Datasheet S u rge P rotection Devices SD Series Data an d S ignal Pro tection SL P S eries Data an d S ignal Pro tection MA15 Series AC an d DC Po wer Protectio n TP48 Ser ies T ran smitter and S en so r P rotection United States Weidmuller 821Southlake Blvd. Richmo nd,Virginia 23236 Telephone:(800)849-9343 Facsimile:(804)379-25 93 Email:info@w eidmu ller.com Web site:w ww. we idmuller.com N E W MA15 Series AC & DC Po wer Protection The MA15 Seriesofsurgeprotectiondevicesprotectselectronic equipment and computer networksagainsttheeffectsofnoise pollutioninducedinpower supplies.MA15 unitsfilteroutand suppresstheeffectsofindustrialnoiseand surgescaused by lightning,switchingdevices,thyristorcontrols,transmissionsystem overloadsand power-factorcorrectioncircuits. ProductFeatures:

• 18kA surgeprotectionand RFI filtering
• Protectspanelloadsup to15 Amps inseries, unlimitedAmps inparallel
• SuitableforAC orDC application
• Thermaland shortcircuitprotection
• LED statusindicationfeature
• 10yearproductwarranty SD Series SLP Series Da taand SignalProtection The SD Seriesareultra-slimuser-friendlydevicesforprotectingelectronic equipment and systems againstsurgeson signaland I/Ocabling,and theSLP Seriesprovides20kA power surgeprotectionforprocess control,equipment systems and distributionpanels. ProductFeatures:
• Range ofATEX Certifiedintrinsicallysafesurgeprotectors
• Ultra-slimand space savingdesigns;easy installation
• Multistagehybridprotectioncircuitry-10kA maximum surgecurrent forSD Series,and 20kA maximum surgecurrentforSLP Series
• Range ofvoltageratingsidealforprocessI/Oapplications
• Designed forhighbandwidth,low resistanceapplications;RTD, PublicSwitchTelephoneNetwork (PSTN)and 3-wiretransmitter versionsavailableinSD Series
• Surge protectionfortwo loopsorone 4-wirecircuitper SLP Seriesmodule
• 10yearproductwarranty The SD and SLP Seriessurgeprotectiondevicesprovideunparalleled packingdensities,applicationversatility,provenand reliablehybrid circuitry,simpleinstallationand optional‘loopdisconnect’facilities(SD Series).These featuresmake theSD and SLP Seriestheultimatesurge protectionsolutionsforprocesscontrolequipment,I/Osystems and communicationsnetworks. TP 48 Series Transm itterand SensorProtection The TP48 Seriesoftransmitterprotectorssafeguardselectronicprocess transmittersagainstinducedsurgesand transientsfrom fieldcabling. They uniquelyprovidea levelofprotectionfor2,3 and 4 wirefield- mounted transmittersthatgreatlyexceeds theoptionaltransient protectionfacilitiesavailablefrom thetransmittermanufacturerswithout any additionalwiring,conduitmodificationsorotherexpensiveextras. ProductFeatures:
• Easy and directmounting – simplyscrew intospareconduitentry
• Intrinsicallysafe;flameprooftoCENELEC standards;ATEX approved
• Parallelconnectionavoidsintroductionofresistanceintoloop

Su rge P rotec tion Dev ices SD Series The exceptionally highpacking densitiesaretheresult ofan ultraslim footprintforindividualmodules,which can doub le-upas feedback terminals.Each module provides fullhybridsurge protectionfor2 and 3-wire loop protection. Mo duleswitha compreh ensiverange ofvoltageratings coverallprocess relatedsignals such as RTDs, Thermo- couples (THCs),4 -20mA loops,telemetryoutstations, shut-down systems and fireand gas detectors. The optionalloop disconnectfeatured on theSD07,SD 16, SD3 2 and SD55 modules allows users toperform com missioningand maintenance withoutremovingthe surge protection device.In addition,a thirdconnection on the field and safe side ofthe module is provided for safeterminationofshields. Forthreewireapplicationsthe specially designed SDRTD (Resistance Temper ature Detector)and the SD3 2T3,(forseparately pow ered 4 -20mA loops) provide full3-wireprotection ina singlecomp actunit. The SD07R3 provides protectionof 3-wirepressure transducers on low pow ercircuits. Forhigherbandw idthapplications,the SDR Series me etsthedeman ds oftoday’shighestspeed com municationsystems. 120V and 240V AC versions are availableforI/Oand power supplies up tothree Amps ofload current. Telephonenetworks can be protectedby the SDPS TN. Allm odules areDIN-railmou ntableon a TS-35 rail. A com prehensive range ofmou ntingand grounding accessories areavailable. SLP Series The mu lti-stage hybrid surge protection networkatthe heartofthe SLP uses a comb ination ofsolid stateelectronics and a gas filled discharge tube (GDT )toprovide surge protection up to20kA .Thisimp ressive surge protection circuitis designed toexhibitexceptionally low line resistance and adds only a minimal voltage drop to thecircuit. The SLP device does notadverselyaffecttheperformance oroperation ofthe loop orcomb ined equipment during operation.The device allow s signals to pass withverylittle attenuation,w hile diverting surge currents safelytothe ground and clamp ing outputvoltages to safelevels. Fullyautoma tic inoperation,SLP devices reactimme diately toensure thatequipme ntis neverexposed todamag ing surges betw een lines orthe lines and ground.Re acting instantly,the SLP redirects surges safelyto theground and resets automa tically. The versatile SLP series provides fullhybrid surge protection,comb ining protection fortw o process loops into one case. Forhigherbandw idthapplications,the SLP series has been developed to mee tthe dema nds oftoday’shighestspeed commun ication systems .

SD Se ries S u rg e P rotectio n Devices SD SeriesGu idetoapplications and selection The SD Series ofsignalprotectiondevices includes mod elsfora fullrange ofapplications operatingatvoltages up to 250V ac.The optionalfuse/disconnectpackage provides both fused protectionagainstfaultcurrentsand a convenient m ethod ofisolating fieldcircuitryfrom protected circuitryw ithoutrequiringadditionaldisconnectterminals.The standard fuse (replaceable)israted 250mA. 50mA fuses areavailable by specialrequest.Solidlinkscan be used inapplications wh ereonlythe disconnectfeature isrequired. This feature isimportantin applications w herea signalprotection device isused witha bulkpower supplyfeedingmultiple loops.The individualfuse mo dulepreventsa faultorfollow on currenton one loop disruptingthepower supply to the others.In addition,loops can be remo ved from the circuitformaintenance oradded withoutrequiringadditional disconnectterminals. The following guide provides applicationinformation fortheSD series.Fortechnicalinformation,see page 9. Analog inputs (high-level) 2-w ire transm itters,4-20m A,conventionaland smart SD32 and SD 55 arerecommen ded foruse w ith conventionaland sma rt4-20mA transmitters(fed by a we ll-regulated supply),the choicedependentupon the m aximum workingvoltage ofthe system (32V and 5 5 V respectively).The diagram illustrates an application using the fuse/disconnect.Both mod elsareavailable in ‘X’ versions withoutthe optionalfuse/disconnectfeature. Analog inputs (low-level) R TD s,Thermocouples (THCs)and m V sources usingthe SDRT D. Foroptimum accuracy,the energizingcurrentshould be chosen to ensurethe voltageacross theRTD does not exceed 1Voverthe fullmeas uremen trange.Whe n using a P T100device,an energizing currentof1mA is recomm ended. Pho tocellsand turbineflowmeters Depending upon theoperationalvoltage,the SD07 orSD16 arethe preferredchoicesforthisapplication. SD07X and SD16X are alsosuitable. FIELD CIR CUIT PR OT ECT ED CIRCU IT 2-wiretransmitters 3-wireRT Ds photocells, thermo couples (THC s), mV sources and turbine flowme ters

1 Up to 50V dc

(no fuse) 4/20mA Multiple Loops TP48 transmitter protector 1 to 5V 2 SD RTD SD RTD Recorder Controller Computer etc. 2 SD07 SD16 SD07X SD16X (no fuse) 2xSD07X or 2xSD16X Signal Photocell Thermocouple (THC) mV source Turbine Flowmeter

Su rge P rotec tion Dev ices SD Series Analog outputs Co ntrolleroutputs(I/Pconverters) Dependenton the w orkingvoltage,recommendat ions includethe SD 16,SD32 and SD55, and theequivalent ‘X’versions. Digital(on/off)inputs-Sw itches Suitablesignalprotectiondevices includetheSD07,SD16, SD3 2 and SD55 modules,and the equivalent“X”versions. The choiceisdependent upon the operatingvoltage ofthe system. Digital(on/off)outputs- Alarms, LED s, solenoidvalves, etc. The SD32 orSD 32X aretherecommended choice forthis application. TelemetryPublicSwitchTelephone Ne twork (PSTN )-Teleme try outstations The SDPSTN has been designed specificallyforthe protectionofsignals transmittedon publicswitched telephone networks. AC supplied equipment-PLC , I/O systems The recommen ded choice orsystems on 110-120Vac is the SD150X ; for220-240Vac systems,theSD 275X is recom me nded. FIELDC IRCU IT PR OT ECT ED CIRCU IT C ontrolleroutputs (I/Pconverters) Switches Alarms ,LEDs,solenoid values,etc. Telecom line PLC,I/Osystems SD16 SD32 SD35 SD16 SD32X SD55X (no fuse) 2xSD15X, SD32X P I V OV 2 SD07 SD16 SD32 SD55 SD07X SD16X SD32X SD55X (no fuse) SD V OV Logic Signal 2 1 32V max SD32 SD32X (no fuse) LED Alarm SD32X

1 PLC,

DCS, SCADA, etc. Final output from 110/120V ac or 220/240V ac 2 Modem, fax or telephone Incoming Telephone Line 2

SD Se ries S u rg e P rotectio n Devices Transmitterand sensorprotection Transmittersand sensors arew idely used in highly exposed areas and w herelightningdamage iscommo n.In ma ny cases,the idealsolution for2-wiretransmittersorsensorsisthe TP 48,w hich mounts directly ontothetransmittervia spare conduitentries ora teefitting.Where these entries arenotavailable or3-wiredevices areused,thecompact design and simple installationofthe SD Series ma kes itan idealchoice fortransmitterprotection. The SDs w ithin thejunctionbox shouldbe installed as close as possibleto the sensorortransmittertheyareprotecting, butno furtherthan one me teraway .A bond is required from thegeneralmass ofsteelworktothe sensorortransmitter housing,using eithera flatshortbraid ora cableatleast0.16 inch 2 (4mm 2)cross sectionalarea.In mo stinstances,this bond is mad e automa tically by fixing theme tallic transmitterhousing tothe plantstructureand ensuresthevoltage difference between thesignalconductorsand the transmitterhousing isbelow thetransmitter’sinsulationrating. P lease note thatthe transmitters orsensorsareconnected totheSD protectedequipment terminals,notthefieldcables. 2-wiretransmittersorsensors 4-20mA transmitters- conventionaland sm art The SD16X,SD 32X and SD55X arean excellentalternative ifthe TP 48 is notan acceptable solution,eitherbecause of technicalsuitabilityormoun ting difficulties. 3-wiretransmittersorsensors V ibrationSensors and 4-20mA loopprocess control system s generallyrequirethreewire connectionsw hen powe red from an externalsource.Thisma y be accom plished inone unitby using the SD 32T3 3-terminal Surge P rotectionDevice (SPD).Because theSD 32T3 protectsallthreeconductors w ithinthe same unit,higher protection isachieved because the SPD hybrid circuitryis comm on to allthreewires. The SD07R3,SD16R3,SD32R3 and SD55R3 arealso suitableforthe protectionof3-wire pressuretransducers on low powe rcircuits. 4-wiretransmittersorsensors- Flow me ters, leveldetectors,etc. 4-wire systems such as leveldetectorsrequiretwo SDs, one forthe supplyand the otherforthe transmitteroutput. Ge nerallythe voltages across the pairsaresimilar,so the recomm ended choiceisa pairofSD16X,SD 32X or SD55X s.Dependentupon the supplyvoltage,A C powe red transm itters should be protected with an SD150X forthe supplyinputs. SD PR OT ECT ED FIELD C IRC U IT TO HO ST CIR CU IT 2-wiretransmitterorsensor 3-wiretransmitterorsensor 4-wiretransmitterorsensor Plant structure SD16X SD32X SD55X 4-20mA SPD DIN rail Plant structure 24V 4-20mA Common OV SPD DIN rail SD32T3 Plant structure 4-20mA Supply voltage Supply OV SPD DIN rail SD16X SD32X SD55X

Su rge P rotec tion Dev ices SD Series Co mmun ication systems protection High-speed datalinks between buildings orone partofa planttoanotherhave become mo recommon withthe w idespread use ofsma rttransmittersand theincreaseinremote installations.The SD Serieshas an SPD suitablefor allprocess I/Oapplications with a choice oflow resistance units,high bandwidthand a variety ofvoltageranges. Featuringan extreme lyhighbandwidth,theSDR Seriesisdesignedto me ettherequirementsforhigh speed datalinks. Co mmun icationsystems R S232,RS422, R S485 The recom m ended choicefortheseapplications isthe SD16R orSD 32R dependingon the ma ximum driversignal. Bu s powe redsystems There area varietyofbus powered systems specially designedforthe process industry.The idealsurge protectiondevice forthese systems istheSD32R, with a veryhighbandw idthand mod estin-lineresistance. TypicalApplications Table 1shows suitableSD devicesfordifferentapplica tions. In some applications alternativedevices may be used,for example,w herelowerin-line resistance ora highervoltage power supply is used. MT LSurgeTechnologies has operationallytested the recom me nded SD Series unitswith the representative highway s listed.How ever,no formalapprovalfortheir use inthese systems has been soughtfrom the respective bodies. Application PreferredPartN o. Alternate PartN o. Allen BradleyDataHighw ay P lus SD1 6R FoundationFieldbus 31.25kb its/s voltage m ode SD3 2R 1.0/2.5 Mb its/s SD55R HA RT SD3 2X SD 32, SD 32R Hone ywellDE SD3 2X SD 32, SD 32R LonWorks FFT-10 SD3 2R LPT-10 SD55R TP -78 SD0 7 R IS78† SD3 2R Mod bus & Mod bus P lus(RS485) SD1 6R PROFIB US DP SD3 2R PA (IEC1158,31.25 kbits/s) SD3 2R RS 232 SD1 6 SD 1 6X RS 422 SD0 7 R RS 423 SD0 7 R RS 485 SD0 7 R WorldRP (IEC1158) SD3 2R 31.25 kbits/svoltage m ode 1.0/2.5 Mb its/s SD55R Table 1 TP P ROT ECT ED FIELD C IRCU IT SD P R O TECT ED HO ST CIR CU IT R S232,R S422,R S485 PROT ECT ED FIELD C IRC UIT SD P R O TECT ED HO ST CIR CU IT Buspow eredsystems TP48 SD32R (no fuse) SD32R (no fuse) SD32R (no fuse) TP48

SD Se ries S u rg e P rotectio n Devices Ha zardous areaapplications Zone0/Zone1 The dangersfrom lightning induced sparkingin Zone 0 are considered realenough torequire preventative mea sures. IEC 60079-14(1996-12)Electricalapparatus forexplosive gas atm ospheres Pa rt14:Electricalinstallations in hazardous areas (otherthan mines)stresses the im portance ofSPD s inhazardous areas.An outdoor installation wh ere there is a highlikelihoodofbothlightning induced transientsand combu stiblegases requires the installation ofSPD s topreventpossibleignition ofthe gases.A reas seen particularly atrisk include flamma ble liquid storage tanks,effluenttreatment plants,distillation colum ns inpetrochemicalworks and gas pipelines. SP Ds fortransmitterprotectionshould be installedinZone 1, sufficientlyclose totheZone 0 boundarytopreventhigh voltages entering Zone 0.The distance from the SP D to Zone 0 should be less than 36”w here possible.In practice the SP D w ould norma lly be mou nted on thetransmitteror sensorhousingw hich usuallyliesinZone 1and is very close toZone 0.Because there isonly a verysmallfree volum e,the SD series issuitableformou nting inflame proof orexplosion proofenclosures. Zone 2 The SD series issuitableforprotecting electricalcircuitsin Division 2,Zone 2 and can be used w ithoutaffecting the safety aspectsofthe circuit.No n-incendive (low-current) circuitscan be protectedusing any SD series unitmou nted ineitherthe safe orhazardousarea,includingthose withthe fuse disconnects facility.Nona rcing(highcurrent)circuitscan also be protected,howev erSPDs w iththe fuse disconnect facilitym ay only be mounted in thesafearea.Foruse in these circuitsthe unitsmust be mounted ina suitable enclosure.In mo stcases the minimum requiremen tsare IP5 4 and 7N m resistancetoimpact.The SD series isself certified by M TLSurgeTechnologies as suitableforthis purpose. Certification Introducing surge protectioninto Intrinsically Safe(IS) circuitsis troublefree as long as the currentand powe r parametersarenotexceeded.In the SD series,theSDX, SDR,SDR3,SD RTD and SDT3allhave A TEX certificationforuse inIS circuitslocated in Zones 0,1or2. The certificationparametersforthe SDX and SD T3 are: EEx iaIICT4, Li= 0.22mH li= 260mA forUi up to20V li= 175mA forUi up to26V li= 140mA forUi up to28V li= 65mA forUi up to60V The certification parameters forthe SDR ,SDR3 and SD R TD are: EEx iaIICT4, Li= 0 li= 260mA forUi up to60V The pow errating foreach ofthe above isdependenton the table show n below. Pi = 1W (–30°Cto+75°C) Pi = 1.2W(–30°Cto+60°C) Pi = 1.3W(–30°Cto+40°C) The SD **series areclassified as simple apparatusand are intended foruse in Zone 2 orsafe areas only,because their fuses are notfully encapsulated. Installation Po sitioning The SDs shouldbe mo unted on the fieldwiringsidetoensure thatany surges enteringfrom the field do notdamag e any intrinsically safebarriers orgalvanicisolatorsinthe system. The SDs and intrinisicallysafeinterface shouldbe mou nted close toeach otherbuton separateDIN-railsinorderto maintain the required1.97”(50mm) clearance between safe areaand hazardous area terminalsofthe IS interface. Grounding The recommen ded grounding forfield-mounteddeviceshas been illustrated previously.The groundingatthe controlpanel ismore criticalas there areusually a number ofgrounding system s,each with theirown requiremen ts.The grounding system illustrated herereplacesthe instrumen t0V bond,the controlsystem P SU bond and the IS ground withone single ground connection to meet allthe design requirementsand givethe mo steffectiveprotection againsttheeffectsof lightning induced surges. In allinstallations utilizing safety related apparatus, considerationshouldbe given toprotecting thesystem supply and any long commu nicationcable . Field cables SD series DIN rail IS barrier DIN rail Instrument Instrument earth Substation ground mat Marshalling cabinet System Connection Cable SPD Isolated instrument rail Isolated instrument rail Electrical earth Frame connection Floor void System earth To plant/neutral star point

Su rge P rotec tion Dev ices SD Series Specifications SD Series Allfigurestypicalat77°F(25°C) unless otherwise stated Protection Fullhybridline toline Each line toscreen/ground Ma x.dischargesurge current(I max ) (8/20µs) 10kA (8/20µs) 6.5kA (SD150 X and SD275 X only) M ax.dischargesurge current(i sn ) 3kA (8/20µs) Lightningimpulsecurrent( Iimp ) (10/350µs) 2.5kA 1.0kA (SD150 X and SD275 X only) R esponse time <1ns RT D resistance range (SDRT D ) 10 to 15 0 0 Deg radation accuracy(SDR TD at1mA) 0.1% (RTD resistance> 100 ) 0.1W (RTD resistance < 100 ) Amb ienttemp erature –40°C to+80°C -w orking(-40°F to176°F) –40°C to+80°C -storage (-40°F to176°F) H um idity 5 to95 % RH (non-condensing) Categorytested A2 ,B2,C 1,C2 ,C3 Ove rstressed faultmod e In=3kA 12kA 9kA (SD150X and SD27 5X only) Impulse durability (8/20µs) 10kA 6.5kA (SD150 X and SD275 X only) Terminals 2.5m m 2 (12AW G) Mo unting T-section DIN -rail35 x 7.5 or35 x 15mm rail Weight 70g approximately(2.5oz) Cas e flamm ability UL94 V-2 AC durability 1A rms ,5 T Service conditions 80kP a -160kPa 5% -95 % RH EMC com pliance To G enericImmun ityStandards, EN 5 0082,part2 forindustrial environments R& TTE com pliance EN 5 0082-2 :1995 EN 41003 :1999 EN 60950 :1992 (notapplicable toSD150X and SD2 75X ) LVD com pliance SD 150X & SD27 5 X EN 60950 :1992 EN 61010:1995 SD P STN EN 41003 :1999 IEC comp liance EN 61643-21:2001 Ordering D ata TechnicalD ata N ominalvoltage+(U n)Vdc N ominalvoltage+(U n)Vac N ominalcurrent(I n)mA Series resistance W/line Max .leakage current µA Rated voltage (MC OV) U c V oltage protection level(U p) @ 1kV/µs V Residualvoltage@ i sn V Bandw idth frequency f G Specialfeature PartN o. SD0 7 25 0 4.2 50 0 7.7 <12 fuse disconnect PartN o. SD 16 25 0 4.2 <25 fusedisconnect PartN o. SD 32 250 4.2 <45 fuse disconnect PartNo . SD 55 5 5 25 0 4.2 <90 100 fuse disconnect Ordering Data TechnicalDa ta N ominalvoltage+(U n)Vdc N ominalvoltage+(U n)Vac N ominalcurrent(I n)mA Series resistance W/line Max .leakage current µA Rated voltage (MCOV) U c V oltage protection level(U p) @ 1kV/µs V Residualvoltage@ i sn V Bandw idth frequency f G Specialfeature PartNo. SD0 7R 400 2.7 50 0 7.7 <12 high Bandw idth PartN o. SD16 R 400 4.7 <25 5 0 high Bandw idth PartN o. SD 32R 400 <45 high Bandw idth PartNo . SD 55R 5 5 400 <90 100 5 0 high Bandwidth Approvals C ountry(Authority) Standard Ce rtificate/File N o. Approved for Product C anada,U SA CSA C 22.2 No .0-M1991 LR 10365 2-3 EEx ia C lass 1, SD07,SD 16,SD32,SD5 5 , (CSA/C /US) CSA C 22.2 No .15 7-M1992 G roups A, B SD07X,SD16X,SD 32X, UL 913,5 th edition C and D,T4 SD55X ,SD07R,SD 16R , C SA C 22.2 No .142-M1987 C lass 1,Div 2 SD32R,SD5 5 R ,SD R DT, CSA C 22.2 No .213-M1987 G roups A,B,C ,D T4 SD32T3,SD07R 3,SD16R3, UL 5 08,17thedition SD32R3,SD 5 5 R 3 U L1604,3rdedition U SA UL 497BListed E220693 Isolated loop SD07,SD 16,SD32,SD5 5 (UL) commu nication SD07X,SD16X,SD 32X circuits SD55X ,SD07R,SD 16R SD32R,SD5 5 R ,SD07R 3 SD 16R3,SD 32R 3,SD5 5 R3 SD 32T3,SD55 T3, SD07X3,SD16X3,SD 32X3, SD 55X 3,SDR TD USA ,Ca nada UL 1449 E2175 23 A C pow er SD150X,SD 275 X (UL) Re cognized Co mpo nent protection 0.28” 7.0mm +0.4mm -0.0mm +0.02” -0.0” 3.99” (101.3mm) 4.03” (102.1mm) 0.28” rail (7mm) 4.32” (109.6mm) 0.6” rail (16mm) 3.9” (99mm)

SD Se ries S u rge Protection Devices Ordering Da ta TechnicalDa ta N ominalvoltage+(U n)V dc Nomi nalvoltage+(U n)V ac Nomi nalcurrent(I n)m A Series resistance W/line Max .leakage current µA Ra tedvoltage(M CO V )U c V oltageprotection level(U p) @1kV/µs V Re sidualvoltage @ i sn V Bandwidthfrequency f G Specialfeature PartN o. SD07X 400 2.2 500 7.7 <12 low resistance PartNo. SD1 6X 400 2.2 <25 low resistance PartNo. SD 32X 400 2.2 <45 low resistance PartN o. SD 55X 5 5 400 2.2 <90 100 low resistance O rdering Da ta TechnicalDa ta Nom inalvoltage+(U n)V dc N om inalvoltage+(U n)V ac Nom inalcurrent(I n)mA Series resistance W/line M ax.leakage current µA Rated voltage (M CO V) U c Voltage protectionlevel(U p) @ 1kV/µs V Residualvoltage @ i sn V Bandwidth frequency f G Specialfeature PartN o. SD 32T3 400 2.2 <45 720 3 terminal PartN o. SD0 7 R3 400 2.7 500 7.7 <12 5 0 3 terminal PartN o. SD1 6R3 400 4.7 <25 5 0 3 terminal PartN o. SD 32R3 400 <45 3 terminal PartN o. SD55R 3 5 5 400 <90 100 3 terminal Ordering Da ta TechnicalDa ta Nom inalvoltage+(U n)V dc Nom inalvoltage+(U n)V ac Nom inalcurrent(I n)mA Series resistance W/line Max .leakage current µA Rated voltage (M CO V) U c Voltage protectionlevel(U p) @1kV/µs V Residualvoltage @ i sn V Bandwidth frequency f G Specialfeature PartN o. SD RTD 0.75 > 10 2.7 0.3 <12 3-wireRTD PartNo. SDPSTN 162 114 550 4.7 175 <200 235 PSNT PartNo. SD1 50X 170 120 0.1 25 0 ac rms; 170 ac 130 ac rms <400 45 0 high current PartN o. SD 275X 339 240 0.1 25 0 ac rms; 350 ac 275 ac rms <700 85 0 high current Mou ntingAccessories

0494920000 RailHolder

Grounding/ Ground RailAccessories

1010100000 Gr ound terminal,DIN railmou nted

Accessories(Re placeme nt) SD F25 Rep lacem entfuse pack -250mA standard Preferred Alternate Application PartN o. PartN o. A llen Bradley Data H ighwa y Plus SD16R FoundationFieldbus 31.25k bits/s voltage m ode SD32R 1.0/2.5 Mb its/s SD55R HA RT SD32X SD32,SD 32R Ho neywe llDE SD32X SD32,SD 32R LonWork s FFT-10 SD32R LPT-10 SD55R TP -78 SD07R IS78† SD32R M odbus & Mo dbus P lus (R S485 ) SD16R Preferred Alternate Application PartN o. PartN o. PR O FIBU S DP SD 32R P A (IEC1158,31.25 kbits/s) SD 32R R S232 SD 1 6 SD 1 6X R S422 SD 07R R S423 SD 07R R S485 SD 07R W orldR P (IEC 1158) SD 32R 31.25 kbits/svoltage mod e 1.0/2.5 Mb its/s SD 55R

Su rge P rotec tion Dev ices S LP Series Specifications SLP Series A llfigurestypicalat77°F(25°C) unlessotherwise stated M aximum surgecurrent 20kA (8/20µs wav eform)perline Leakage Current <1mA @ workingvoltage Ma ximum rated loadcurrent 1.5 0A Loop resistance

2 Oh m

-0.1db @ 9kHz -37M Hz -3dB @5 0M Hz Re sponse time <1ns Amb ienttem perature –40°C to+80°C (working) –40°Fto+176°F(working) –40°C to+80°C (storage) –40°Fto+176°F(storage) Hum idity 5 to 95% R H (non-condensing) Terminals 2.5 mm 2 (12A WG ) Electricalconnections P lug/headerscrew terminalstrip Mo unting T-sectionDIN-rail(35x 15mm rail) Weight 5o z (140g approximately) Cas e flamm ability UL94-V0 EM C compliance BS EN 6095 0:1992 BS EN 61000-6-2:1999 BS EN 61010-1:1993 Ordering Da ta TechnicalD ata N ominalvoltage U n Rated voltage (MC OV) U c N ominalcurrentI n N ominaldischarge current(8/20µs)i sn Max dischargecurrent(8/20µs)I max Lightningimpulse current(10/350µs)I imp Residualvoltage @ i sn U p V oltage protection level@ 1kV/µsU p Bandw idth f G C apitance C Series resistance R Op erating Tempe rature Ra nge C ategorytested Ov erstressed faultmode in=3kA Impu lse durability (8/20µs) Degree ofprotection AC durability Serviceconditions PartNo. SLP0 7D 1.5 0A 3kA 20kA 2.5 kA 10V <8V

50 MHz

1.0 -40°C to +80°C A2 ,B2,C 1,C2 ,C3,D1 22kA 10kA IP2 0 1A rms ,5 T 80kPa -160kP a 5% -95 % RH PartN o. SLP1 6D 16V 18V 1.50A 3kA 20kA 2.5kA 23V <18V 50MH z 60pF 1.0 -40°C to +80°C A2 ,B2,C 1,C2 ,C 3,D1 22kA 10kA IP 20 1A rms ,5T 80kP a -160kP a 5% -95 % R H PartN o. SLP32D 24V 32V 1.50A 3kA 20kA 2.5kA 40V <38V 50MH z 60pF 1.0 -40°C to +80°C A2 ,B2,C1,C2 ,C3,D1 22kA 10kA IP 20 1A rms ,5T 80kP a -160kPa 5% -95% R H Dim ensions Installation Con nections Cou ntry(Authority) Standard Certificate/File N o. Approved for Product ATEX BS EN 6095 0:1992 A TEX0377X EEx N IIC T4 SLP0 7D,SLP16D, BS EN 61000-6-2:1999 SLP3 2D BS EN 61010-1:1993 USA (FM) Class No s.3600 (1998), 3011208 Intrinsically Safe: SLP0 7D,SLP16D, 3610 (1999), I/1/A-D,I/O/IIC SLP3 2D 3611(1999),3615 N on incendive:I/2/A-D, (1989),3810incl. I/2/IIC Sup p 1(1995 -07 (1989-03), A NS I/NEMA 25 0 (1991), Can ada (FM) C2 2.2 N o.213,142,94, 30253 74 IS/I/1/ABCD SLP0 7D,SLP16D, 15 7,30 I/0/Exia/IIC SLP3 2D ANS I/NEMA 25 0 I/0/Exib/IIC CAN /CSA -E79-0 N E/I/2/ABC D C AN /CSA -E79-11 N E/I/2/IIC Approvals

MA 15 Se ries S u rg e P rotectio n Devices M A15 Series A lthough industrialcomputersand P LCs aredesigned tobe rugged,theextra protectionprovidedby the DIN -rail mou nting MA15 units is critical.Ideally suitedforprotecting panelmounted equipme ntand typically used inthe controlssectionofa motorcontrolcenter (MCC),the MA15 range provides surge and R FIprotectedpow er. With a unique ‘three-stage’comb ination ofprotection elemen ts,these units suppressconductedRFI and voltage surges.The circuitelements are:(1)surge clipping componen tstoabsorbtransient surges thatmay otherwisedama ge equipme nt,(2)a filtertosuppress noise in the system and,(3)ring suppression. Ring suppression preventssurges causing the filterto‘ring’(oscillate)under lowload conditions – an effectthat actuallyaccentuatesinterferenceinmost comme rcially available filters. SuitableforAC orDC application,MA15 unitsreduce bothelectromagnetic emissions and thesusceptibilityofthe associated equipme nttoemissionsfrom othersources.MA15 devices also offer installation flexibility.To protectcircuits rated 15A orless,MA 15devices should be installed inseries.To protecthigher currentcircuits,simply installthe MA15 in parallel. LED status indicationis standardwiththe MA 15units.Thermalfusingisalso incorporatedintoeach 18kA rated device as an additionalsafetyfeature.MA 15 modu les also offershortcircuitprotection foradded safety. Specifications M A15 Series Max im um surge current: 18kA (8/20 µs)perm ode M axim um leakage current:<0.3m A M axim um continuous operating current 15A series connection U nlim ited Am ps in parallel Max im um continuous operating voltage 25% above nom inal Limiting voltage Letthrough voltage @ 500 A ring 120V /140V versions 295V 240V /280V versions 35 6V @ 500 A 8/20 µs 120V /140V versions 320V 240V /280V versions 800V @ 3kA 8/20 µs 120V /140V versions 396V 240V /280V versions 975V @ 10kA 8/20 µs 120V /140V versions 58 5V 240V /280V versions 1210V M axim um attenuation (typical): -55 dB @ 100M Hz M odes protected: L-N,L-G,N -G Am bienttem perature limits –40°Fto +185 °F(wo rking) –40°C to +85 °C (working) Hum idity 95% RH (non-condensing) Casing Po lym ide-PA, with G -orT-section (Top-hat)DIN-railm ountingfoot Conn ectors Screw terminal Term inals 0.1inch 2 (2.5 m m 2 )12 AW G Mo unting G- orT-section (‘Top-hat’)or 1.4 inch (35 mm )DIN rail Weight 3.53 oz (100g) EMC com pliance BS EN 6095 0 :1992 BS EN 61000-6-2:1999 LED Indication Gre en LED on Protectionpresent Gre en LED offInternalfailure Allfigures typicalat77°F(25°C )unlessotherwisestated OrderingData PartN o. AC DC MA 15 D1 SI 120V,47-63Hz 140V MA 15 D2SI 240V,47-63Hz 280V The grounding ofthe surge protectorand the protectedequipmen tis very imp ortantand,if possible,shouldbe accom plished as illustrated. Please note thatthe unitism arked Line and Load and itisimp ortantthatthe unitisinstalled withthe Line side connectedto the incoming powe rand the Load connected to the equipm enttobe protected. Forparallelapplication how ever,the Line side is connected tothe incoming pow erand the Load left unconnected. Series Connection Current < 15A Dim ensions Installation Approvals Coun try (Authority) Standard Approved for ProductNo . Un ited States U L1449 A C P ow erP roduct MA15 D1SI, Ca nada R ecognized Co mpo nent MA15 D2SI Un ited States U L1449 Ha zardous Locations MA15 D1SI, Ca nada R ecognized Co mpo nent Class I,Division 2 MA15 D2SI UL 1604 G roups A ,B,C and D Parallel Connection Current > 15A

Allfigures typicalat77°F(25°C )unless otherwise stated Maxim um surgecurrent 10kA peak current(8/20µs waveform) Leakage current Lessthan 10µA atm aximum workingvoltage W orking voltage

48 V DC ma ximu m

N o resistance introducedintoloop Am bienttemperaturelimits -20°C to +80°C (working) -40°C to +80°C (storage) H umidity 5 % to 95% RH (non-condensing) Electricalconnections TP48 3 flying leads (line1,line 2 & ground) TP48 3 W ire 4 flying leads (+ve,-ve,signal& ground) TP48 4 W ire 5 flying leads (+ve,-ve,signal+ve,signal-ve,ground) W ire size 32/0.2(1.0m m 2,18 AW G ) Lead length 250mm (m inimum ) C asing AN SI 316stainlesssteelhexagonalbarstock, male thread Threads TP48-3-N & TP 48-4-N 1/2”N PT TP48-3-I & TP 48-4-1 20m m ISO (M 20 x 1.5) TP48-3-G & TP 48-4-G G 1/2”(BSP1/2”) Weight 175g (6.2oz) D imensions See Figure1 EMC compliance To G enericImmu nityStandardsEN 50082,part2 forindustrialenvironm ents Electricalsafety EEx iaIIC T4,C eq=O, Leq=0; the unitcan be connected withoutfurthercertification into any intrinsicallysafe loop with open circuitvoltage <60V and inputpow er<1.2W. EEx d IIC T4; the unitis apparatus-approvedtoflame proof(explosionproof)standards,and can be fittedinto a similarly approved housing. The TP Series protectionnetwork consistsofhigh-power,solid-state electronicsand a gas-filled discharge tubecapableofdiverting10kA impulses. The w holeunitisencased in an ANS I 316 stainless steelhousing,threaded forthe com mon conduitentriesused on process transmitters.V ersions areavailablefor 1/2”NP T,20mm ISO, and G 1/2”(BSP 1/2 inch)threadedentries. The TP units aredesigned formo unting directlyinto an unused conduitentryon a process transmitterhousing.Ge nerally,two such entries are provided,one ofwh ichis used fortheloop w iring.On theunused entry,the blanking plug orotherclosure device is remo ved and an appropriately threaded TP screw ed intoitsplace.The transmitterspecificationshouldprovide informa tion indicating therequired thread type.TP units can be installed using thread adaptors ifnecessary,including certified adaptors in hazardous areaapplications. Forapplications w heretwo conduitentries are notprovided orw hereboth areused forelectricalconnections,TP unitscan be housed in conventionalconduithub or junction boxes,provided access to the loop terminals is possible.Figure2 shows connec - tion details for3 & 4 wireprocess transmitter. Coun try(Authority) Standard C ertificate/File N o. Approved for Product Ate x Directive BS EN 50 021:1999 TML02AT EX0032X Ex n IIT6 (-40°C<Tamb <+60°C) TP4 8-X-Y-Z 94/9/EC EEx n IIT5 (-40°C<Tamb <+85°C ) U SA (FM) C lass No s.3600 3022293 IntrinsicallySafe: TP4 8-X-Y-Z (1998),3610 (1999), I,II,III/1/A-G, I/0/IIC 3611(1999),3615 Explosionproof:I/1/A-D (1989),3810 incl. N on incendive:I/2/A-D,I/2/IIC Supp 1(1995 -07 Du stignition proof:II,III/1/EFG (1989-03), Specialprotection:II/2/FG A NSI/NEMA 25 0 (1991), Ca nada (FM) C 22.2 No .15 7 3025 374 IntrinsicallySafe: TP4 8-X-Y-Z C22.2 No .213 I,II,II/1/A-G, I/O/IIC C 22.2 No 142 Explosionproof:I/1/A-D C22.2 No .94 N onincendive:I/2/A-D,I/2/IIC C22.2 No .30 Du stignition proof:II,III/1/EFG Specialprotection:II/2/FG Glob al IEC 60079-0:2004 IECEx BAS 07.0045X Ex iaIIC T4/T5/T6 TP4 8-X-Y-NDI IEC 60079-11:2006 Ex tD A 20 IP 6X T85°C /T100°C/ T135°C IEC 61241-0:2004 IEC 61241-1:2004 Ke y: X = 3 or4 orblank,Y = N,I orG ,Z = ND I Approvals Lead length 9.85” (250mm) minimum 2.95” (75mm) 1.07” (27mm) 2.17” (55mm) 0.91” (23mm) Installation D ime nsions LIT0805 Dim ensions across flats 0.91”(23m m ) Figure2 Figure 1 Ordering Da ta PartNo. TP48NND I C ertified SP D -1/2”NPT thread TP48IND I C ertified SP D -20mm ISO thread TP48GN DI C ertified SP D -G 1/2”(BSP 1/2inch) TP483NND I C ertified SP D -1/2”NPT thread TP483IND I C ertified SP D -20mm ISO thread TP483GN DI C ertified SP D -G 1/2”-BSP 1/2inch TP484NND I C ertified SP D -1/2”NPT thread TP484IND I C ertified SP D -20mm ISO thread TP484GN DI C ertified SP D -G 1/2”-BSP 1/2inch Su rge P rotec tion Dev ices TP48 Series