TP2S TOPPOWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

w w w . g z t o p p o w e r . c o m TEL:020-82019000 EMAIL:sales@gztoppower.com page 1 of 3 DESCRIPTION ： The TP2S series are a range of isolated 3 Watt converters in a low profile DIP package, 2:1 wide input range and tightly regulated output voltage qualifies these converters for many cost critical applications in industrial and consumer electronics. Operating temperature range from -40ºC to 85ºC, the internal SMD construction makes it possible to offer a product with high performance at low cost. 3W 1KVDC Isolated Single Output DC/DC Converters

FEATURES

RoHS compliant Industry standard footprint Single isolated output Short circuit protection Operating temperature :–40°C to +85°C Low profile 24 pin case 2:1 Wide input range Input voltage：5V, 12V, 24V ,48V Output voltage:3.3V, 5V, 12V ,15V Footprint 4.73cm2 UL94V-0 Package materials 1KVDC isolation SELECTION GUIDE Part Number Input Voltage Rated Output Voltage Output Current Efficiency Voltage(VDC) Min. Load Full load Rated Range values (V) mA mA % TP2S0503 5 (2:1) 4.5-9 3.3 226 908 62 TP2S0505 5 (2:1) 4.5-9 5 150 600 70 TP2S0512 5 (2:1) 4.5-9 12 64 252 76 TP2S0515 5 (2:1) 4.5-9 15 49 201 78 TP2S1203 12 (2:1) 9-18 3.3 226 908 71 TP2S1205 12 (2:1) 9-18 5 150 600 72 TP2S1212 12 (2:1) 9-18 12 64 252 75 TP2S1215 12 (2:1) 9-18 15 49 201 76 TP2S2403 24 (2:1) 18-36 3.3 226 908 72 TP2S2405 24 (2:1) 18-36 5 150 600 78 TP2S2412 24 (2:1) 18-36 12 64 252 79 TP2S2415 24 (2:1) 18-36 15 49 201 84 TP2S4803 48 (2:1) 36-72 3.3 226 908 71 TP2S4805 48 (2:1) 36-72 5 150 600 75 TP2S4812 48 (2:1) 36-72 12 64 252 80 TP2S4815 48 (2:1) 36-72 15 49 201 80 INPUT CHARACTERISTICS Parameter Conditions Min. Typ. Max. Units Voltage range All TP2S05 4.5 5 9 V Voltage range All TP2S12 9 12 18 V Voltage range All TP2S24 18 24 36 V Voltage range All TP2S48 36 48 72 V OUTPUT CHARACTERISTICS Parameter Conditions Min Typ Max. Units Voltage set point accuracy With external input/output capacitors ±1 ±3 % Line regulation Low line to high line with external input/ output capacitors 0.2 0.5 % Load regulation Minimum load to rated load with external input/ output capacitors % Load regulation Minimum load to rated load with external input/ output capacitors 1.4 % All specifications typical at TA=25°C, nominal input voltage and rated output current unless otherwise specified. TOPPOWER

w w w . g z t o p p o w e r . c o m TEL:020-82019000 EMAIL:sales@gztoppower.com page 2 of 3 ABSOLUTE MAXIMUM RATINGS Short-circuit protection Continuous Lead temperature 1.5mm from case for 10 seconds 300°C Minimum output load for specification 25% of rated output 05V input types 10V 12 input types 20V 24 input types 40V 48 input types 80V Free air space 10mm Min. around component GENERAL CHARACTERISTICS Parameter Conditions Min. Typ. Max. Units Switching frequency 100% to 25% load, VIN Min. to Max. 70 660 kHz TEMPERATURE CHARACTERISTICS Parameter Conditions Min. Typ. Max. Units Operation -40 85 ℃ Storage -50 130 ℃ Case temperature rise above ambient 40 ℃ TEMPERATURE CHARACTERISTICS Parameter Conditions Min. Typ. Max. Units Isolation voltage Flash tested for 1 second 1000 VDC Resistance Resistance 1 G□ RECOMMENDED INPUT & OUTPUT CAPACITORS These converters will work without external capacitors, in order to guarantee the full parametric performance over the full line and load range we recommend you to use the value we listed below. All parts have been tested and characterized using the following values and test circuit. Onput Voltage Cout 3.3V, 5V 220µF, 16V (0.12Ω at 100kHz) 12V, 15V 100µF, 25V (0.25Ω at 100kHz) Input Voltage Cin 5V, 12V 100µF, 25V (0.25Ω at 100kHz) 24V, 48V 10µF, 100V (1.5Ω at 100kHz) TEST CIRCUIT REFLECTED RIPPLE CURRENT MEASUREMENT CIN COUT Supply +V IN IN-V Supply IN IN-V OUT+V OUT TP2S TP2S OUT-V OUT IN IN+V Supply -V IN IN+V Supply COUTCIN 电流探测器 C 12uH Laod Current C1 = 220µF, ESR < 0.1Ω at 100kHz TOPPOWER

w w w . g z t o p p o w e r . c o m TEL:020-82019000 EMAIL:sales@gztoppower.com page 3 of 3 Weight: 6.2g All dimensions in mm ±0.25mm. All pins on a 2.54mm pitch and within ±0.25mm of true position. NA - Not available for electrical connection. NC-No internal connection MECHANICAL DIMENSIONS PIN CONNECTIONS

24 PIN DIP

RECOMMENDED FOOTPRINT DETAILS TUBE OUTLINE DIMENSIONS SOLDERING INFORMATION This series is compatible with RoHS soldering systems with a peak wave solder temperature of 300℃ for 10 seconds. The series is backward compatible with Sn/Pb soldering systems. MINIMUM LOAD The minimum load for correct operation is 25% of the full rated load across the specified input voltage range. 16.70±0.80 11.70±0.80 16.70± 0.55 20.70± 0.55 5.50± 0.25 6.80± 0.55 0.60± 0.15 All dimensions in mm ±0.25m. All pins on a .54mm pitch and within ±0.25mm of true position. All dimensions in mm ±0.5mm. Tube length : 520mm ±2mm. Tube Quantity:15PCS 2.54 2.54 8HOLES1.30 1.45 -Vin NC NA +Vout -Vout +Vin 1411 2-Vin +Vin Top view 0.30 0.20 4.70 3.70 7.00 14.66 YYWW TP2S2412 32.26 0.73 0.63 15.25(MAX) 22.86 2.54 4.70 5.08 TOPPOWER TOPPOWER