TP20AC_V01 TOPPOWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

www.gztoppower.com TEL:0086-20-62162688 Email:sales2@gztoppower.com Page1 / 3 DESCRIPTION： TP20AC series is 20W with wide input voltage range, for both AC input and DC input application, come with low power can meet the EMC and safety specifications : IEC/EN61000-4、CISPR22/EN55022、UL60950/EN60950/EN60601 and other related standards.This series of products are widely used in smart home, high-end lighting, medical, industrial control, office and civil industries ,etc. ***please refer to the application circuit when the parts is applied in the environment with severe electromagnetic compatibility. 20W 4KV Isolation Wide Input AC/DC Converters All specifications typical at TA=25°C, nominal input voltage and rated output current unless otherwise specified.

FEATURES

Miniature @ height 1.55CM High efficiency, up to 89% Input voltage range (90-264 Vac,50/60Hz) Low Ripple &Noise,Output protection EMC surge> level 4 Low power consumption <0.1W RoHS compliant Operating temperature: -40℃ to 70 ℃ / SELECTION GUIDE Part Number Input Output Efficiency (%)(Typ) Ripple &Niose (mv) Voltage VAC Voltage VDC Voltage （VDC) Current （A） TP20AC220S03W 90-264 100-370 3.3 4.0 84 100 TP20AC220S05W 90-264 100-370 5 4.0 86 100 TP20AC220S09W 90-264 100-370 9 2.2 86 100 TP20AC220S12W 90-264 100-370 12 1.66 88 100 TP20AC220S15W 90-264 100-370 15 1.33 88 100 TP20AC220S24W 90-264 100-370 24 0.83 88 100 Above PN suffix with “A”for wire package, for example: TP20AC220S05WA INPUT SPECIFICATIONS Input Voltage Range 90~ 264VAC (≦115VAC derating @0.2W/VAC) 100~ 370VDC Input Frequency 47 ~ 440Hz Input Current (typ.) 360mA /115VAC 205mA /230VAC Inrush Current (typ.) 30A/230 VAC Recommended External Fuse T2A/250 Leakage current (typ.) ＜0.1mA at 265VAC/50Hz PROTECTION SPECIFICATIONS over-voltage/over-current/short circuit protection, self-recovery  OUTPUT SPECIFICATIONS Output Voltage Accuracy ±2.0% Line Regulation ±1.0% Load Regulation ±1.0% Start rising time (typ.) 100ms/230VAC 200ms/115VAC at full load Output hold time (typ.) 40ms/230VAC 15ms/115VAC at full load ENVIRONMENT CHARACTERISTICS Operating Temperature -40~+70 ℃ ( ≧40℃ derating @0.2W/ ℃) Operating Humidity 85% .RH max Storage Temperature -40~+85, 10~95% RH Temperature Coefficient 0.03%/(0~ 50℃) Vibration coefficient 10~500Hz,2G10min./1cycle, 60min.each along X,Y,Z axes TOPPOWER

www.gztoppower.com TEL:0086-20-62162688 Email:sales2@gztoppower.com Page2 / 3 SAFETY & ELECTROMAGNETIC COMPATIBILITY Safety Standard EN60950,EN60601,UL60950 Isolation voltage I/P-O/P:4000VAC Isolation resistance I/P-O/P>100M Ohms/500VDC 25℃ 70% RH Conduction and Radiation EN55011, EN55022 (CISPR22) CLASS B(refer toTypical application circuit) Electrostatic Discharge ( ESD) IEC/EN 61000-4-2 level 4 8kV/15kV(refer toTypical application circuit) RF radiation immunity (RF) IEC/EN 61000-4-3 (refer toTypical application circuit) Electrical Fast Transient Burst (EFT) IEC/EN 61000-4-4 level 4 4kV (refer toTypical application circuit) Surge IEC/EN 61000-4-5 level 4 2kV OTHERS MTBF 200K hrs min. MIL-HDBK-217F(25) Dimensions 50.80*25.40*15.50mm NOTES 1. The data in this manual are measured at TA=25 ° C, humidity <75%, input nominal voltage 230Vac and output rated load,except for special instructions. 2. Ripple and noise are measured with a bandwidth of 20MHz, using a 300mm twisted pair, base on the application circuit in this data sheet 3. This power supply is considered as a component in the system, and it is necessary to confirm the electromagnetic compatibil ity with the terminal equipment. APPLICATION CIRCUIT Notes： 1.C5/C6 is electrolytic capacitor ,recommend to use High-frequency low-resistance electrolytic capacitor (the capacitance and current refer to data sheet) ,C4is to filter out high frequency noise 2.The EMC filter within the dashed box is connected to meet the higher EMC requirements.it is not necessary in the general application 3. The components L1,CX,NF in the dashed box, we have made them into a filter , Named PN: FA01 APPLICATION CIRCUIT TYPICAL VALUES Component PN FUSE NTC MOV L1 CX NF L2 C5/C6 C4 D1 TP20AC220S03W T2A /250V External connect to NTC ( Thermistor), model：10D-9 MOV (Varistors) recommend value 14D471K 1mH/ 0.8A CX is Safety grade X capacitance 104K/275V NF is Common-mode inductance, the value 30mH, current 0.5A. 10uH /3A 2200uF/16 104K/50V （ceramic capacitor） P6KE6.8A TP20AC220S05W 2200uF/16 P6KE6.8A TP20AC220S09W 1000uF/16 P6KE16A TP20AC220S12W 680uF/16V P6KE16A TP20AC220S15W 470uF/25V P6KE20A TP20AC220S24W 220uF/35V P6KE33A TOPPOWER

www.gztoppower.com TEL:0086-20-62162688 Email:sales2@gztoppower.com Page3 / 3 RATING GR MECHANICAL DIMENSIONS PIN DESIGN DIP package PIN Single 1 N 2 L 3 +V0 4 -V0 Wire package（PN suffix with “A”） SELECTION GUIDE TP 20 A C 220 S 05 W W:4:1 Wide voltage input range Main (auxiliary) output voltage S:single output Rated input voltage Package type AC-DC Rated output power Brand name U n i t s : m m T o l e r a n c e : ± 0 . 2 m m U n i t s : m m W i r e d i a m e t e r : 2 4 ~ 1 2 A W G T o l e r a n c e : ± 0 . 5 m m(±0.02mm) TOPPOWER