TP20AC TOPPOWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

www.gztoppower.con TEL:0086-20-8 2019000 Email:sales2@gztoppower.com Page 1 / 3 DESCRIPTION： The rated output power of TP20AC series is 20W,With very low no-load consumption (only 60mW), Low leakage current(only 0.1mA ),ultra-small size,（50.8*25.4*15.5mm）,isolated voltage up to 4KVAC. Product safe and reliable,Good EMC performance,EMC And meet the safety specifications of IEC/EN61000-4,CISPR22/EN55022,UL60950/EN60950/EN60601,etc. Widely used in medical, industrial, office and civil industries, if applied to the bad electromagnetic compatibility must refer to the application circuit 20W 4KVAC Isolation Wide Input AC/DC Converters All specifications typical at TA=25°C, nominal input voltage and rated output current unless otherwise specified. OUTPUT CHARACTERISTICS Parameter Conditions Mini. Typ. Max. Units Output voltage accuracy ±2 % Line regulation ±1 % Load regulation ±1 % Short-circuit protection Overvoltage, overcurrent, short circuit protection,self-recovery Ripple & Noise 20MHz bandwidth (peak-peak value) 50 120 mv Temperature Coefficient ±0.03 %/℃ Start rising time 115VAC Input while full-load 200 ms Start rising time 230VAC Input while full-load 100 ms Output hold time 115VAC Input while full-load 15 ms Output hold time 230VAC Input while full-load 40 ms

FEATURES

Universal input voltage range AC and DC dual-use Wide input voltage: 4:1 Low power consumption High efficiency,high power density, ultra-small size Over current protection, Short circuit protection Low Ripple & Noise RoHS compliant Operating temperature: -40℃ to 70℃ SELECTION GUIDE Part Number Input Output Efficiency (typ.) Voltage（VAC) Voltage （VDC) Current（A） VAC VDC TP20AC220S03W 85-265 120-370 3.3 3.60 80 TP20AC220S05W 85-265 120-370 5 3.60 80 TP20AC220S09W 85-265 120-370 9 2.20 82 TP20AC220S12W 85-265 120-370 12 1.66 83 TP20AC220S15W 85-265 120-370 15 1.33 83 TP20AC220S24W 85-265 120-370 24 0.83 83 INPUT CHARACTERISTICS Parameter Conditions Mini. Typ. Max. Units Voltage range DC Input 120 220 370 VDC Voltage range AC Input 85 220 265 VAC Input frequency 50 60 HZ Input Current 115VAC 210 mA Input Current 230VAC 100 mA Inrush current 115VAC 16 A Inrush current 230VAC 30 A External fuse recommended value 1A/250V, slow fusing, necessary Hot plug Unavailable Leakage current 265VAC/50Hz ＜0.1 mA TOPPOWER

www.gztoppower.con TEL:0086-20-8 2019000 Email:sales2@gztoppower.com Page 2 / 3 TEMPERATURE CHARACTERISTICS Parameter Conditions Mini. Typ. Max. Units Isolation voltage Tested for 1 min. 4000 VAC Operating Temperature According to the output load derating curve -40 +70 ℃ Storage Temperature -40 +85 ℃ Storage Humidity 10 95 % .RH max SAFETY & ELECTROMAGNETIC COMPATIBILITY Safe standard EN60950,EN60601,UL60950, Isolated voltage I/P-O/P:4000VAC Isolation resistance I/P-O/P>100M Ohms/500VDC 25 70% RH℃ Conduction and radiation EN55011, EN55022 (CISPR22) CLASS B Electrostatic discharge( ESD) IEC/EN 61000-4-2 level 4 8kV/15kV Rf radiation immunity (RF) IEC/EN 61000-4-3 EFT IEC/EN 61000-4-4 level 4 4kV （ Note: see application circuit for details ） Surge IEC/EN 61000-4-5 level 4 2kV （ Note: see application circuit for details ） MTBF 200K hrs min. MIL-HDBK-217F(25) NOTES 1.The above data, except for special instructions, are measured at TA = 25℃, humidity <75%, input nominal voltage 230Vac and output rated load 2.Ripple and noise are measured according to the application circuit of this manual, using a 300mm twisted pair and in the case of a bandwidth of 20MHz 3.The parts in the system is considered as a component, need to combine the terminal equipment for electromagnetic compatibility related confirmation. PRODUCT SCHEMATIC DERATING CURVE TYPICAL APPLICATION CIRCUIT TOPPOWER

www.gztoppower.con TEL:0086-20-8 2019000 Email:sales2@gztoppower.com Page 3 / 3 NOTES ： 1. The output filter capacitance C5/C6 is the electrolytic capacitor. It is recommended to use the high frequency low resistance electrolytic capacitance, the capacity and the current of the flow;Please refer to the technical specifications provided by the manufacturers. The C4 is to remove the high frequency noise. 2. The dashed box is an EMC filter that is accessible for higher EMC requirements, which can be omitted while general applications 3. We has formed a filter for L1, CX and NF ,for the customer to use, the model is FA01. TYPICAL APPLICATION CIRCUIT Component PN FUSE NTC NF L1 MOV CX L2 C5/C6 C4 D1 TP20AC220S03W T2A /250V Recommend ed external NTC thermistor, model: 10d-9 NF is common mode inductance, inductance value in 30mH, current 0.5 A. 1mH/ 0.8A MOV is the voltage resistance and the recommende d value is 14D471K CX is the safety X capacitanc e, 104K / 275V 10uH/ 2200uF/16V 104K/50 (Ceramic capacitors) P6KE6.8A TP20AC220S05W 2200uF/16V P6KE6.8A TP20AC220S09W 1000uF/16V P6KE16A TP20AC220S12W 680uF/16V P6KE16A TP20AC220S15W 470uF/25V P6KE20A TP20AC220S24W 220uF/35V P6KE33A MECHANICAL DIMENSIONS DIP packaging PIN Single 1 N 2 L 3 +V0 4 -V0 SELECTION GUIDE All dimensions in mm ±0.2mm TP 20 A C 220 S 05 W W:4:1 Wide voltage input range Main (auxiliary) output voltage S:single output, D:Dual output Rated input voltage Package type AC-DC Rated output power Brand name Ø1.00 20.32 15.30 6.00 ?1.00 25.40 10.16 50.80 45.72 bottom view 1 3 TOPPOWER