TP0705BF TRANSKO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Rev 3: 09 -11 -2019 Power Inductor SMD (7.80 X 7.00 X 5.00 mm)

FEATURES

  • Ideal for Reflow • Halogen Free RoHS compliant
  • High Current Capacity • Open Winding SPECIFICATION SCHEMATIC Part Number Ind. (µH) DCR (Ω) Max. IDC (A) Max. TP0705BF -1R0_ 1.0 0.020 7.00 TP0705BF -3R3_ 3.3 0.023 4.00 TP0705BF -4R7_ 4.7 0.025 3.50 TP0705BF -6R8_ 6.8 0.042 3.20 TP0705BF -8R2_ 8.2 0.050 3.00 TP0705BF -100_ 10 0.070 2.30 TP0705BF -120_ 12 0.080 2.00 TP0705BF -150_ 15 0.090 1.80 TP0705BF -180_ 18 0.100 1.60 TP0705BF -220_ 22 0.110 1.50 TP0705BF -270_ 27 0.120 1.30 TP0705BF -330_ 33 0.130 1.20 TP0705BF -2R2_ 2.2 0.023 4.50 Test Freq (Hz) 7.96M 7.96M 7.96M 7.96M 7.96M 7.96M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M mm A 7.80 ±0.30 B 7.00 ±0.30 C 5.00 ±0.50 DIMENSION
  • Rated current: Min(Isat, Irms), Isat: drop 10% typ., Irms: ∆T=40°C typ. at 25°C ambient.
  • Inductance tolerance option at end of part number: K: ±10% ; M: ±20%
  • Test equipment: CH1062A / CH1320 Part Number Ind. (µH) DCR (Ω) Max. IDC (A) Max. TP0705BF -390_ 39 0.160 1.10 TP0705BF -470_ 47 0.180 1.10 TP0705BF -560_ 56 0.240 0.94 TP0705BF -680_ 68 0.280 0.85 TP0705BF -820_ 82 0.370 0.78 TP0705BF -101_ 100 0.430 0.72 TP0705BF -121_ 120 0.470 0.66 TP0705BF -151_ 150 0.640 0.58 TP0705BF -181_ 180 0.710 0.51 TP0705BF -221_ 220 0.960 0.49 TP0705BF -331_ 330 1.260 0.40 TP0705BF -471_ 470 1.960 0.34 Test Freq (Hz) 2.52M 2.52M 2.52M 2.52M 2.52M SOLDER PATTERN mm E 8.00 F 7.20 d2 2.10

Rev 3: 09 -11 -2019 REEL DIMENSIONS (1000 pcs per reel) mm W1 16.00±0.3 I 1.75±0.1 F 7.50±0.1 P0 4.00±0.1 G 2.00±0.1 P1 12.00±0.1 C 8.10±0.1 t0 0.35±0.05 D 7.20±0.1 H 5.50±0.1 J 3.70±0.1 mm W 330±1.5 D 21.5+0.5/ -0 C 13+0.5/ -0.2 T1 16.5+0.5/ -0 N 100±1.5 T2 21.4±0.4 E 2.00±0.5

Rev 3: 09 -11 -2019 1.Operating temperature range -40 TO + 105°C (Includes temperature when the coil is heated) 2. External appearance On visual inspection, the coil has no external defects. 3. Terminal strength After soldering. Between copper plate and terminals of coil. Push in two directions of X.Y withstanding at below conditions. Terminal should not peel off. (refer to figure at right) 5.0N 60 sec. 4. Insulating resistance Over 100MΩ at 100V D.C. between coil and core. 5. Dielectric strength No dielectric breakdown at 100V D.C. for 1 minute between coil and core. 6. Temperature characteristics Inductance coefficient (0~2,000)x10 -6 /°C ( -25~+80°C) inductance deviation within ±5.0%, after 96 hours 7. Humidity characteristics (Moisture Resistance) Inductance deviation within ±5%, after 96 hours in 90~95% relative humidity at 40 ±2°C and 1 hour drying under normal condition. 8. Vibration resistance Inductance deviation within ±5%, after vibration for 1 hour. In each of three orientations at sweep vibration (10~55~10 Hz) with 1.5mm P -P amplitudes. 9. Shock resistance Inductance deviation within ±5%, after being dropped once with 981m/s 2 (100G) shock attitude upon a rubber block method shock testing machine, in three different orientations. 10. Resistance to Soldering Heat: 260°C, 10 seconds (See recommended reflow) 11. Storage environment Temperature Range: 10 ℃ ~ 35 ℃ (Generally: 21 ℃ ~ 31 ℃ ) Humidity Range: 50% ~ 80% RH (Generally: 65% ~ 75%) Transportation condition: Temperature Range: -35 ℃ ~ 85 ℃ Humidity Range: 50% ~ 95% RH 12. Use components within 12 months. If 12 months or more have elapsed, check solderability before use. RELIABILITY TEST LEAD -FREE HEAT ENDURANCE TEST LEAD -FREE RECOMMENDED REFLOW