TP0403BF TRANSKO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Rev 1: 03 -05 -2019 Power Inductor SMD (4.50 X 4.00 X 3.20 mm)

FEATURES

  • Ideal for Reflow • Halogen Free RoHS compliant
  • High Current Capacity • Open Winding SPECIFICATION
  • Inductance tolerance option at end of part number: K: ±10% ; M: ±20%
  • Measurement frequency of Inductance value : at 100KHz, 0.25V
  • Test equipment: CH3302 / CH1320 SCHEMATIC SOLDER PATTERN Part Number Inductance (µH) DCR (Ω) Max. IDC (A) Max. TP0403BF -1R0_ 1.0 0.033 3.80 TP0403BF -2R2_ 2.2 0.047 2.60 TP0403BF -2R7_ 2.7 0.052 2.43 TP0403BF -3R3_ 3.3 0.058 2.15 TP0403BF -3R9_ 3.9 0.076 1.98 TP0403BF -4R7_ 4.7 0.094 1.70 TP0403BF -5R6_ 5.6 0.101 1.60 TP0403BF -6R8_ 6.8 0.117 1.41 TP0403BF -8R2_ 8.2 0.132 1.26 TP0403BF -100_ 10 0.182 1.15 TP0403BF -120_ 12 0.210 1.05 TP0403BF -150_ 15 0.235 0.92 TP0403BF -180_ 18 0.338 0.84 TP0403BF -220_ 22 0.378 0.70 TP0403BF -270_ 27 0.522 0.71 mm A 4.50 ±0.30 B 4.00 ±0.30 C 3.20 ±0.30 DIMENSION Part Number Inductance (µH) DCR (Ω) Max. IDC (mA) Max. TP0403BF -330_ 33 0.540 0.64 TP0403BF -390_ 39 0.587 0.59 TP0403BF -470_ 47 0.844 0.54 TP0403BF -560_ 56 0.937 0.50 TP0403BF -680_ 68 1.117 0.46 TP0403BF -820_ 82 1.345 0.45 TP0403BF -101_ 100 1.520 0.44 TP0403BF -121_ 120 1.800 0.43 TP0403BF -151_ 150 2.000 0.42 TP0403BF -181_ 180 3.200 0.38 TP0403BF -221_ 220 3.400 0.36 TP0403BF -331_ 330 5.300 0.28 TP0403BF -471_ 470 6.800 0.21 TP0403BF -681_ 680 10.00 0.18 TP0403BF -821_ 820 13.40 0.15

Rev 1: 03 -05 -2019 LEAD -FREE HEAT ENDURANCE TEST LEAD -FREE RECOMMENDED REFLOW REEL DIMENSIONS (2000 pcs per reel) mm W1 12.00±0.3 I 1.75±0.1 F 5.50±0.1 P0 4.00±0.1 G 2.00±0.1 P1 8.00±0.1 C 4.75±0.1 t0 0.35±0.05 D 4.25±0.1 H 3.50±0.1 mm W 330±1.5 D 21.5+0.5/ -0 C 13+0.5/ -0.2 T1 12.5+0.5/ -0 N 100±1.5 T2 17.5±0.4 E 2.00±0.5

Rev 1: 03 -05 -2019 1.Operating temperature range -40 TO + 105°C (Includes temperature when the coil is heated) 2. External appearance On visual inspection, the coil has no external defects. 3. Terminal strength After soldering. Between copper plate and terminals of coil. Push in two directions of X.Y withstanding at below conditions. Terminal should not peel off. (refer to figure at right) 5.0N 60 sec. 4. Insulating resistance Over 100MΩ at 100V D.C. between coil and core. 5. Dielectric strength No dielectric breakdown at 100V D.C. for 1 minute between coil and core. 6. Temperature characteristics Inductance coefficient (0~2,000)x10 -6 /°C ( -25~+80°C) inductance deviation within ±5.0%, after 96 hours 7. Humidity characteristics (Moisture Resistance) Inductance deviation within ±5%, after 96 hours in 90~95% relative humidity at 40 ±2°C and 1 hour drying under normal condition. 8. Vibration resistance Inductance deviation within ±5%, after vibration for 1 hour. In each of three orientations at sweep vibration (10~55~10 Hz) with 1.5mm P -P amplitudes. 9. Shock resistance Inductance deviation within ±5%, after being dropped once with 981m/s 2 (100G) shock attitude upon a rubber block method shock testing machine, in three different orientations. 10. Resistance to Soldering Heat: 260°C, 10 seconds (See recommended reflow) 11. Storage environment Temperature: 0°C~35°C; -40°C~105°C (after mounting on PCB) Humidity Range: 50% ~ 70% RH 12. Use components within 12 months. If 12 months or more have elapsed, check solderability before use. RELIABILITY TEST