TP01AZ_V02 TOPPOWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

TP01(02)AZ Series www.gztoppower.com TEL:0086-20-62162688 Email:sales2@gztoppower.com Page1 / 3 DESCRIPTION： The rated output power of TP01(02)AZ series is 1W,2W with wide input voltage range, for both AC input and DC input application. High reliability, Low power consumption, low leakage current 0.1mA, High isolation.Product safe and reliable,Good EMC performance,EMC And meet the safety specifications of IEC/EN61000-4、CISPR22/EN55022、UL62368/EN662368/IEC62368. Widely used in industrial control and electrical instrumentation, smart home, which do not have high requirement on EMC. The EMC external circuit must be added if the products need to be applied to EMC harsh environment. 1W, 2W 3KVAC Isolation Wide Input AC/DC Converters All specifications typical at TA=25°C, nominal input voltage and rated output current unless otherwise specified. OUTPUT CHARACTERISTICS Output Voltage accuracy ±3.0% (±5.0% max） Line regulation ±1.0% Load regulation ±1.0% Start rising time( Typ.) 20ms/230VAC 50ms/115VAC at full load Start holding time( Typ.) 40ms/230VAC 15ms/115VAC at full load Short circuit protection Over-Load protection , Over-Current protection ,Short circuit protection , Auto recovery GENERAL CHARACTERISTICS Operating temperature —40 ~ +80 ℃ ( ≧50℃, derating @0.011W/℃) Operating humidity 85% .RH max Storage temperature –40 ~ +85, 10 ~ 95% RH Temperature coefficient 0.03%/ (0~ 50℃) Vibration coefficient 10~500Hz,2G10min./1cycle, 60min.each along X,Y,Z axes

FEATURES

ultra-small size ，width is only1.5CM , plastic case Universal input voltage range Low Ripple & Noise、Output protection Lower power consumption, no-load loss<0.05W Built-in EMI filter circuit RoHS compliant SELECTION GUIDE Part Number Input Voltage Output Efficiency (Typ. ) Ripple (mv) VAC VDC Voltage（VDC) Current（mA） TP01AZ220S03W 85-305 80-400 3.3 300 62 150 TP01AZ220S05W 85-305 80-400 5 200 68 150 TP01AZ220S09W 85-305 80-400 9 111 70 150 TP01AZ220S12W 85-305 80-400 12 83 71 150 TP01AZ220S15W 85-305 80-400 15 67 71 150 TP01AZ220S24W 85-305 80-400 24 42 74 150 TP02AZ220S03W 85-305 80-400 3.3 600 64 150 TP02AZ220S05W 85-305 80-400 5 400 70 150 TP02AZ220S09W 85-305 80-400 9 222 73 150 TP02AZ220S12W 85-305 80-400 12 167 75 150 TP02AZ220S15W 85-305 80-400 15 133 75 150 TP02AZ220S24W 85-305 80-400 24 83 77 150 INPUT CHARACTERISTICS Voltage range 85~ 305VAC,80 ~ 400VDC Input frequency 47 ~ 440Hz Input current (Typ.) 55m A / 115VAC,34m A / 230VAC Inrush Current (Typ.) 20 A/230 VAC Recommended values for External Fuses 10Ω/1W( Fusible Resistor) Leakage current ( Typ.) ＜0.1Ma at 265VAC/50Hz

TP01(02)AZ Series www.gztoppower.com TEL:0086-20-62162688 Email:sales2@gztoppower.com Page2 / 3 SAFETY AND ELECTROMAGNETIC COMPATIBILITY Safety standard EN60950,EN60601,UL60950 Isolated Voltage I/P-O/P:3000VAC Isolated resistance I/P-O/P>100M Ohms/500VDC 25℃ 70% RH Conduction and radiation EN55011, EN55022 (CISPR22) CLASS B （See the application note for details） Electrostatic discharge ( ESD) IEC/EN 61000-4-2 level 4 8kV/15kV （See the application note for details） Radiofrequency radiation immunity(RF) IEC/EN 61000-4-3 （See the application note for details） Electrical fast transient(EFT) IEC/EN 61000-4-4 level 4 4kV Surge IEC/EN 61000-4-5 level 4 2kV OTHER CHARACTERISTICS MTBF 200K hrs min. MIL-HDBK-217F(25) Dimension 32*20*15mm NOTES 1.The above data except for special instructions, are measured at TA = 25oC, humidity <75%, input nominal voltage 230Vac and output rated load 2.Ripple & noise are measured in accordance with the link of the application circuit in this manual, using a 300mm twisted pair-wire and 20MHZ bandwidth 3.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives TYPICAL APPLICATION CIRCUIT Notes 1.The output filter capacitor C5 is electrolytic capacitor, recommend using of high frequency and low resistance of electrolytic capacitors, the capacity and the current flowing-through need refer to the technical specifications provided by the manufacturer. C4 is use to remove high frequency noise. 2.EMC filter used in the dashed box is to meet the higher requirements，if it is used in general applications，it can be omitted. 3. Our company make the filter circuit in the dashed box，which can be used with switching power supply

TP01(02)AZ Series www.gztoppower.com TEL:0086-20-62162688 Email:sales2@gztoppower.com Page3 / 3 MECHANICAL DIMENSIONS PIN CONNECTIONS DIP packaging Pin Single Output 1 L 2 N 3 +Vo 4 -V0 RATING GR SELECTION GUIDE TP 02 A Z 220 S 05 W W:4:1 Wide voltage input range Main (auxiliary) output voltage S:single output Rated input voltage Package type AC-DC Rated output power Brand name U n i t s : m m T o l e r a n c e : ± 0 . 2 m m