TP0026A TAI-SAW | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
TAI-SAW TECHNOLOGY CO., LTD. 2 TST DCC Release document TAI-SAW TECHNOLOGY CO., LTD. 14.1x9.1 20MHz OCXO MODEL NO.: TP0026A REV. NO.: 1.0 Revise:
1 N/A Initial release 11/15/11’ N/A Ginger Huang
TAI-SAW TECHNOLOGY CO., LTD. 3 TST DCC Release document TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: tstsales@mail.taisaw.com W e b : www.taisaw.com 14.1x9.1 20MHz OCXO MODEL NO.: TP0026A REV. NO: 1.0 Characteristics Values Unit Note Nominal Frequency 20 MHz Tol ±500 ppb max @ 25°C ±2°C, warmup 30 ±5 minutes within 90 days after shipment Temperature Range Characteristics Min. Nom. Max. Unit Note Operating G1 -20 70 °C Storage -40 85 °C Power - Consumption Characteristics Min. Nom. Max. Unit Note Power Supply 3.14 3.3 3.47 V Vcc ±5% Max values at steady state 400 mA 1.3W at 25°C Max values during Warm-up 900 mA 3W, heating time < 3 min Output Signal LVCMOS Characteristics Min. Nom. Max. Unit Note VOH 2.4 Volt Level VOL 0.4 Volt Rise/Fall time 6 ns Duty cycle 45 55 % Non-harmonics Spur -60 dBc Load 15 pF Frequency Stability Characteristics Min. Nom. Max. Unit Note VS Temperature Range G1 50 ±ppb Refer to freq at 25°C VS Power Supply variation 10 ±ppb Vcc ±5% Static VS Load variation 10 ±ppb Load ±5% Aging Characteristics Values Note 1 day 1 year 10years Unit Medium/Long Term Stability NA 2000 5000 ±ppb After continuous operating for 1 month at 25°C Warm Up 2 mn 100 ±ppb Refer to 1H power on @ 25°C Phase Noise Characteristics Values Note
1 Hz 10 Hz 100Hz 1 KHz 10
-85 -110 -130 -145 -145 dBc/Hz
TAI-SAW TECHNOLOGY CO., LTD. 4 TST DCC Release document Mechanical Conditions Characteristics Conditions Shocks (Non-operating) MIL-STD-202, Method 213, Test Condition J (30 g, 11 ms half-sine) Sine Vibrations (Non-operating) MIL-STD-202, Method 201 (0.06" Total p-p, 10 to 55 Hz) Package - Pin Out Package Ref. S1 drawing Unit: mm Maximum package height 6.85mm Pad 1: N/C or Vctrl Pad 2: N/C Pad 3: Ground Pad 4: output Pad 5: N/C Pin Out Pad 6: Vcc Mechanical drawing Package Ref. S1 DNC: Do Not Connect Dimensional Tolerance: +/-0.005 (0.127mm) Top View 6,6 1,52 1,02 9.52 2,16 2,16 Keep Out Area Suggested Pad Layout Top View Side View Bottom View