TP0019A

TP0019A TAI-SAW | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 6

Technical content

TAI-SAW TECHNOLOGY CO., LTD. 2 TST DCC Release document TAI-SAW TECHNOLOGY CO., LTD. 25.4x22 10MHz OCXO MODEL NO.: TP0019A REV. NO.: 1.0 Revise:

1 N/A Initial release 07/28/11’ N/A Ginger Huang

TAI-SAW TECHNOLOGY CO., LTD. 3 TST DCC Release document TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: tstsales@mail.taisaw.com W e b : www.taisaw.com 25.4x22 10MHz OCXO MODEL NO.: TP0019A REV. NO: 1.0 Characteristics Values Unit Note Nominal Frequency 10 MHz ±200ppb @25°C,Vc=1.5V Temperature Range Characteristics Min. Nom. Max. Unit Note Operating G1 -40 85 °C Storage -50 95 °C Power - Consumption Characteristics Min. Nom. Max. Unit Note Power Supply 4.75 5 5.25 V Max values at steady state 180 mA At 25°C Max values during Warm-up 600 mA <3 minutes at 25°C Frequency Control Characteristics Min. Nom. Max. Unit Note Frequency tuning range 0.7 1.5 ppm Voltage Control 0 3 V Input impedance 100 K Ω Linearity 10 % Slope Positive Reference Voltage 2.8 3 3.2 V Output Signal HCMOS Characteristics Min. Nom. Max. Unit Note VOH 2.7 Volt Level VOL 0.3 Volt Rise/Fall time 10 ns Duty cycle 40 60 % Load 15 pF ||10K ohm Frequency Stability Characteristics Min. Nom. Max. Unit Note VS Temperature Range G1 50 ±ppb Refer to freq at 25°C VS Power Supply variation 5 ±ppb Vcc ±5% VS Load variation 5 ±ppb Load ±5% Aging Characteristics Values Note 1 day 1 month 1 Year 10 Y'rs Unit Medium/Long Term Stability 1 100 ±ppb After continuous operating for 30days at 25°C, daily fluctuation<3ppb Warm Up 3 mn <100 ±ppb Refer to 1H on @25°C

TAI-SAW TECHNOLOGY CO., LTD. 4 TST DCC Release document Phase Noise Characteristics Values Note

1 Hz 10 Hz 100Hz 1KHz 10 KHz 100KHz Unit

Static Conditions -120 -135 -150 -150 -150 dBc/Hz Phase jitter(RMS) <1.00 E -11 0.1s~10s Short-term Stability 1.00E-11 After 1 Hr power on Mechanical & Environmetal Conditions Characteristics Conditions Shocks IEC 68-2-27 Test Ea:30g/11 ms Sine Vibrations IEC 68-2-06 Test Fc:5g/10 to 500Hz Package - Pin Out Package Ref. 942 drawing Unit: mm Maximum package height 14.0mm Pin 1: Vctrl Pin 2: Vref out Pin 3: Vcc Pin 4 RF out Pin 5: N.C. Pin 6: N.C. Pin Out Pin 7: Ground Mechanical drawing Package Ref. 942

TAI-SAW TECHNOLOGY CO., LTD. 5 TST DCC Release document Recommended Reflow Profile: 22 [0.866] 25.4 [1] 23.5 [0.925] 17.8 [0.701] 4 [0.157] 3.5 [0.138] 2.5 [0.098] 2.5 [0.098] R0,75 1,2 H Max17.8 [0.701] 7.62 [0.3] BOTTOM VIEW SUGGESTED PAD No copper area Logo YYWW/XXXX Fo=XX.XMHz PN

TAI-SAW TECHNOLOGY CO., LTD. 6 TST DCC Release document Profile Feature Sn-Pb Asse mbly Pb-Free Assembly Average ramp-up rate (TL to TP) 3°C/second max. 3°C/second max. Preheat -Temperature Min Tsmin) -Temperature Min Tsmax) -Time (min to max) (ts) 120°c 180°c 30-120 seconds 140°c 210°c 30-120 seconds Tsmax to TL - Ramp-up Rate 3°C/second max. 3°C/second max. Time maintainted above - Temperature (TL) - Time (tL) 180°c 30-120 seconds 220°c 30-120 seconds Peak Temperature (TP) max 235°C min200°C max 245°C min230°C Time 25°C to Peak Temperature 360s max. 480s max. Time within 5°C of actual Peak Temperature (tp) 20-40 seconds 20-40 seconds Ramp-down Rate 6°C/second max. 6°C/second max. Time Temperature TL TP t 25°C to Peak Critial Zone TL to TP Ramp-u Ramp-dow ts Ts min tP Ts Preheat tL