TP0011A TAI-SAW | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 6

Technical content

TAI-SAW TECHNOLOGY CO., LTD. 2 TST DCC Release document TAI-SAW TECHNOLOGY CO., LTD. 36.2x27.2 20MHz OCXO MODEL NO.: TP0011A REV. NO.: 1.0 Revise:

1 N/A Initial release 02/23/12’ N/A Ginger Huang

TAI-SAW TECHNOLOGY CO., LTD. 3 TST DCC Release document TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: tstsales@mail.taisaw.com W e b : www.taisaw.com 36.2x27.2 20MHz OCXO MODEL NO.: TP0011A REV. NO: 1.0 Characteristics Values Unit Note Nominal Frequency 20 MHz Tolerance ±50 ppb max @ 25°C ±2°C Vctrl=2.5V Temperature Range Characteristics Min. Nom. Max. Unit Note Operating G1 0 70 °C Operating G2 -20 75 °C Operatable -40 75 °C Storage -40 85 °C Power - Consumption Characteristics Min. Nom. Max. Unit Note Power Supply 11.4 12 12.6 V Vcc ±5% Max values at steady state 120 mA AT 25°C Max values during Warm-up 400 mA Frequency control Characteristics Min. Nom. Max. Unit Note Frequency pulling range 0.4 0.8 ±ppm Refered to Fnom Voltage Control 0 2.5 5 V Postitve Slope Linearity 10 % Reference Voltage 6.65 7 7.35 V Output Signal HCMOS Characteristics Min. Nom. Max. Unit Note VOH 2.7 Volt Level VOL 0.3 Volt Rise/Fall time 5 ns Duty cycle 40 60 % Load1 15 pF ||10K ohm Frequency Stability Characteristics Min. Nom. Max. Unit Note VS Temperature Range G1 4 ±ppb Refer to freq at 25°C VS Temperature Range G2 10 ±ppb Refer to freq at 25°C VS Power Supply variation 0.5 ±ppb Vcc ±5% Static VS Load variation 0.5 ±ppb Load ±5%

TAI-SAW TECHNOLOGY CO., LTD. 4 TST DCC Release document Aging Characteristics Values Note 1 day 1 year 10Years Unit Medium/Long Term Stability 0.5 50 300 ±ppb After continuous operating for 1 month at 25°C Warm Up 3 mn 100 ±ppb Refer to 1H power on @ 25°C 30mn 2 H'r 24h Rretrace 20 ±ppb After 24hours turn off Phase Noise Characteristics Values Note

1 Hz 10 Hz 100Hz 1 KHz 10

-110 -130 -140 -150 dBc/Hz 1ms 100ms 1s 10s Short-term Stability 1.0E-11 After 1 hour power on Mechanical Conditions Characteristics Conditions Shocks IEC 68-2-27 Test Ea:30g/11 ms Sine Vibrations IEC 68-2-06 Test Fc:5g/10 to 500Hz Package - Pin Out Package Ref. 45 drawing Unit: mm Maximum package height 12.7mm Pin 1: Vctrl Pin 2: Vref Pin 3: Vcc Pin 4 RF Output Pin Out Pin 5: Case GND

TAI-SAW TECHNOLOGY CO., LTD. 5 TST DCC Release document Mechanical drawing Package Ref. 45 Packing Style 17.78 25.4+/-0.2 17.78+/-0.2 15.24 27+/-0.2 36+/-0.2 Height 4.2+/-0.5 0.8+/-0.05 0.65+/-0.15 Unit: mm 5010 100 Bottom View Label Logo YYWW/XXXX Fo=XX.XMHz PRJ Name or PN ESD Foam(Black) Preformed Foam Preformed Foam ESD Foam(Black) ESD Foam(Pink)

TAI-SAW TECHNOLOGY CO., LTD. 6 TST DCC Release document Profile Feature Sn-Pb Asse mbly Pb-Free Assembly Average ramp-up rate (TL to TP) 3°C/second max. 3°C/second max. Preheat -Temperature Min Tsmin) -Temperature Min Tsmax) -Time (min to max) (ts) 120°c 180°c 30-120 seconds 140°c 210°c 30-120 seconds Tsmax to TL - Ramp-up Rate 3°C/second max. 3°C/second max. Time maintainted above - Temperature (T - Time (tL) 180°c 30-120 seconds 220°c 30-120 seconds Peak Temperature (TP) max 235°C min200°C max 245°C min230°C Time 25°C to Peak Temperature 360s max. 480s max. Time within 5°C of actual Peak Temperature (tp) 20-40 seconds 20-40 seconds Ramp-down Rate 6°C/second max. 6°C/second max. Internal Carton Box External Carton Box L1 W1 H1 L2 W2 H2 220mm 235mm 70mm 500mm 250mm 250mm 40 pcs OCXOs/Unit 6 Internal Boxes/Unit Time Temperature TL TP t 25°C to Peak Critial Zone TL to TP Ramp-up Ramp-dow ts Ts min tp Ts max Preheat tl