TND027MP-AZ

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 9

Technical content

Features

• N-channel MOSFET built in
• Overheat protection. (Self recovery type)
• Overcurrent protection. (Self recovery type current limiting function)
• Overvoltage protection Specifi cations Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit Drain-to-Source Voltage V DS 60 V Output Current I O(DC) 1.5 A Input Voltage V IN -0.3 to +10 V Allowable Power Dissipation P D 1.0 W Operating Supply Voltage V DS(opr) 40 V Operating Temperature Topr -40 to +85 °C Junction Temperature Tj 150 °C Storage Temperature Tstg -55 to +150 °C Package Dimensions unit : mm (typ) 7520-003 Product & Package Information
• Package : MP
• JEITA, JEDEC : SC-51, TO-92(1-WATT), TO-226AE
• Minimum Packing Quantity : 1,000 pcs./box Marking Block Diagram123 0.5 0.5 0.5 0.6 1.45 1.45 6.0 4.7 5.0 3.0 1.0 8.514.0 1 : GND 2 : OUT 3 : IN MP TND027MP-AZ TND027 LOT No.

No.7691-2/9 Electrical Characteristics at Ta=25°C Parameter Symbol Conditions Ratings Unit min typ max Drain-to-Source Clamp Voltage V DS, clamp V IN=0V, IO=1mA 60 V Output-OFF Current IDSS(1) V IN=0V, VDS=50V 10 μΑ IDSS(2) V IN=0V, VDS=12V 5 μΑ Input Threshold Voltage V IN(th) V DS=5V, IO=1mA 1.0 1.5 2.0 V Protection Circuit Operating Input Voltage V IN(opr) 4 10 V Drain-to-Source ON Resistance R DS(on) V IN=5V, IO=1A 0.3 0.4 Ω Input Current (Output On) I IN VIN=5V 0.6 mA Over-Heat Detecting Temperature Tj(sd) V IN=5V, IO=1A 120 150 190 °C Over-Current Detecting Current Is V IN=5V 3.0 6.0 9.0 A Over-Current Limit (Peak) I LMT VIN=5V 3.0 6.0 9.0 A Input Clamp Voltage V IN, clamp I IN=1mA 10 V Notes : 1. Overcurrent protection circuit limits the output current to the range of overcurrent limit value. 2. During overheat protecting operation, output current is turned off.

Ordering Information

Device Package Shipping memo TND027MP-AZ MP 1,000pcs./box Pb Free 02468 1 0 1 2 0.2 0.4 0.6 0.8 1.0 --50 --25 0.1 0.2 0.3 0.4 0.5 0 25 50 100 75 IT05233 RDS(on) -- VINRDS(on) -- Ta IT05234 IO=1A I O=1A Ta=85°C 25°C --40°C Drain-to-Source ON Resistance, RDS(on) -- Ω Drain-to-Source ON Resistance, RDS(on) -- Ω Ambient Temperature, Ta -- °C Input V oltage, V IN -- V

No.7691-3/9 0.2 0.4 0.6 0.8 1.2 1.0 1.4 02468 1 0 IIN -- Ta IT05235 --50 --25 0 25 50 100 75 IIN -- VIN IT05236 0.02 0.12 0.10 0.08 0.06 0.04 VIN=5V IIN(abnormal) IIN(normal) Ta=25°C 456789 1 0 456789 1 0 --50 --25 0 25 50 100 75 IS -- Ta IT05237 IS -- VIN IT05238 ILMT -- VIN IT05240 --50 --25 0 25 50 100 75 ILMT -- Ta IT05239 Ta=25°C Ta=25°C Ambient Temperature, Ta -- °C Ambient Temperature, Ta -- °C Ambient Temperature, Ta -- °C Input V oltage, VIN -- V Input V oltage, VIN -- V Input V oltage, VIN -- V Input Current, IIN -- mAOvercurrent Detecting Current, IS -- AOvercurrent Limit, ILMT -- A Overcurrent Limit, ILMT -- A Overcurrent Detecting Current, I S -- A Input Current, I IN -- mA --50 --25 0 25 50 100 75 VDS, clamp -- Ta IT05241 VIN, clamp -- Ta IT05242 VIN=0V IO=1mA --50 --25 0 25 50 100 75 IIN=1mA Ambient Temperature, Ta -- °C Ambient Temperature, Ta -- °C Drain-to-Source Clamp V oltage, VDS, Clamp -- V Input Clamp V oltage, VIN, Clamp -- V

No.7691-4/9 0.2 0.4 0.6 0.8 1.2 1.4 1.0 2.0 1.8 1.6 123 VIN(th) -- Ta IT05243 0.8 --50 --25 0 25 50 100 75 IO -- VIN IT05244 1.0 2.0 1.8 1.6 1.4 1.2 VDS=24V Ta=85 --40 --40 --20 20 0 40 60 80 1004.0 4.5 142 144 152 150 148 146 154 160 158 156 140 5.0 5.5 6.0 Tj(sd) -- VIN IT05245 PD -- Ta IT05246 0.2 0.4 0.8 0.6 1.0 1.2 TND027MP VDS=5V IO=1mA Ambient Temperature, Ta -- °C Ambient Temperature, Ta -- °C Threshold V oltage, VIN(th) -- VOverheat Detecting Temperature, Tj(sd) -- °C Input V oltage, VIN -- V Input V oltage, VIN -- V Output Current, IO -- AAllowable Power Dissipation, PD -- W Sample Application Circuit Another Sample Application Circuit (Solenoid drive) AC100V AC24V OUT Lamp INTND027MP 5V GND Microcontroller AC100V AC24V OUT Solenoid GND INTND027MP 5VMicrocontroller

No.7691-5/9 Operation Description

• The output power MOSFET will be turned on when the input voltage exceeds the input threshold voltage (4 to 6V is recommended), and then the lamp will be turned on by the current fl owing to the lamp. Conversely, the output power MOSFET will be turned off when the input voltage goes below the input threshold voltage, and the lamp will be turned off.
• The inrush current that occurs during normal lamp operation is limited to a preset value by the built-in overcurrent protecting circuit, which makes the lamp life longer.
• The internal overcurrent protection function limits the current of output power MOSFET when output current of at least the overcurrent detecting current value fl ows at load short. Besides, if the device temperature exceeds the allowable power dissipation, overheat protection function protects the power switch from being broken down by turning off the current of output power MOSFET when Tj comes to 150°C (typical).
• As an example of application circuit, DC voltage can also be controlled as a solenoid drive. Addition
• The diode between OUT and GND in the block diagram is parasitic diode of the MOSFET.
• Not apply a voltage on IN terminal during the period when OUT voltage is lower then GND voltage when driving a solenoid or a motor.
• Be sure connect a diode between OUT terminal and GND terminal when you want to apply a voltage on IN terminal under the above-stated state (that is, OUT V oltage < GND V oltage).

No.7691-6/9 Taping Specifi cation TND027MP-AZ

No.7691-7/9

No.7691-8/9 Outline Drawing TND027MP-AZ Mass (g) Unit 0.578 * For reference mm

PS No.7691-9/9 ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent covera ge may be accessed at warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation sp ecial, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different ap plications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life , or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiarie s, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.