TN2540-12G STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 10

Technical content

Features

  • Max. blocking voltage = V DRM, VRRM = 1200 V
  • I GT maximum = 40 mA
  • High static and dynamic commutation at T j = 125 °C – dl/dt = 50 A/µs – dV/dt = 1500 V/µs
  • ECOPACK ®2 compliant (RoHS and HF compliance)

Applications

  • Solar
  • Wind renewable energy inverters
  • Solid State Relay (SSR)
  • Uninterruptible Power Supply (UPS)
  • AC DC Inrush Current Limiter (ICL)
  • Battery charger
  • AC DC voltage controlled rectifier
  • Industrial welding systems
  • Off board automotive battery charger
  • Soft starter
  • General purpose motor control

Description

Available in SMD D²PAK with anode in backside. The TN2540-12G SCR is suitable in industrial applications where high immunity is required with a lower gate current. Product status link TN2540-12G Product summary IT(RMS) 25 A VDRM, VRRM 1200 V IGT 40 mA Tj 125 °C Standard SCR, D²PAK, 25 A, 1200 V TN2540-12G Datasheet DS12791 - Rev 1 - October 2018 For further information contact your local STMicroelectronics sales office.

1 Characteristics

Table 1. Absolute maximum ratings (limiting values), Tj = 25 °C unless otherwise specified Table 2. Electrical characteristics (Tj = 25 °C unless otherwise specified) Table 3. Static electrical characteristics

Table 4. Thermal resistance parameter

1.1 Characteristics (curves)

Figure 1. Maximum average power dissipation versus Figure 2. Average and DC on-state current versus case Figure 3. Average and D.C. on state current versus Figure 4. Relative variation of thermal impedance junction

2 Package information

In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark.

2.1 D²PAK package information

  • ECOPACK ®2 compliant
  • Lead-free package leads finishing
  • Molding compound resin is halogen-free and meets UL standard level V0

Figure 9. D²PAK package outline (1) Resin gate is accepted in each of position shown on the drawing, or their symmetrical.

Package information

Table 5. D²PAK package mechanical data

  1. Dimensions in inches are given for reference only

3 Ordering information

Figure 12. Ordering information scheme Table 6. Ordering information

1000 Tape and Reel

Ordering information

Revision history

Table 7. Document revision history 18-Oct-2018 1 Initial release.