TN2222A CDIL | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
NPN SILICON PLANAR SWITCHING TRANSISTOR TN2222A TO-237 Plastic Package For use as a Medium Power Amplifier ABSOLUTE MAXIMUM RATINGS DESCRIPTION SYMBOL Collector Emitter Voltage VCEO Collector Base Voltage VCBO Emitter Base Voltage VEBO Collector Current Continuous IC Power Dissipation @ Ta=25ºC Power Dissipation @ Tc=25ºC @ Ta=25ºC PCB Land Area for Collector Lead >1 sq inch @ Ta=25ºC with heat sink Operating And Storage Junction Temperature Range Tj, Tstg THERMAL RESISTANCE Junction to Case R th (j-c) Junction to Ambient in free air Rth (j-a) Thermal Resistance >with PCB land area for collector lead >1 sq inch Rth (j-a) Thermal Resistance Junction to Ambient with heat sink Rth (j-a) ELECTRICAL CHARACTERISTICS (Ta=25ºC unless specified otherwise ) DESCRIPTION SYMBOL TEST CONDITION MIN UNIT Collector Emitter Voltage *VCEO IC=10mA, IB=0 40 V Collector Base Voltage VCBO IC=10µA, IE=0 75 V Emitter Base Voltage VEBO IE=10µA, IC=0 6 V Collector Cut Off Current ICEX VCE=60V, VEB(off)=3V nA Collector Cut Off Current ICBO VCB=60V, IE=0 nA VCB=60V, IE=0, Ta=150ºC µA Emitter Cut Off Current IEBO VEB=3V, IC=0 nA Base Cut Off Current IBL VCE=60V, VEB(off)=3V nA DC Current Gain hFE IC=0.1mA, VCE=10V 35 IC=1mA, VCE=10V 50 IC=10mA, VCE=10V 75 IC=150mA, VCE=10V 100 IC=150mA, VCE=1V 50 IC=500mA, VCE=10V 40 *Pulse Test: Pulse Width < 300mms, Duty Cycle < 2% TN2222ARev080304E PD 57 ºC/W 167 ºC/W 0.75 W 2.2 W MAX 104 - 55 to +150 ºC ºC/W ºC/W 300 800 mA 1.2 W 1.5 W VALUE UNIT 40 V 75 V 6.0 V E B C Continental Device India Limited Data Sheet Page 1 of 5 Continental Device India Limited An ISO/TS16949 and ISO 9001 Certified Company
NPN SILICON PLANAR SWITCHING TRANSISTOR TN2222A TO-237 Plastic Package ELECTRICAL CHARACTERISTICS (Ta=25ºC unless specified otherwise) DESCRIPTION SYMBOL TEST CONDITION MIN UNIT Collector Emitter Saturation Voltage *VCE (sat) IC=150mA, IB=15mA V IC=500mA, IB=50mA V Base Emitter Saturation Voltage *VBE (sat) IC=150mA, IB=15mA 0.6 V IC=500mA, IB=50mA V SMALL SIGNAL CHARACTERISTICS DESCRIPTION SYMBOL TEST CONDITION MIN UNIT Output Capacitance Cobo VCB=10V, IE=0, f=100KHz pF Input Capacitance Cibo VEB=0.5V, IC=0, f=100KHz pF Small Signal Current Gain hfe IC=1mA, VCE=10V, f=1KHz 50 IC=10mA, VCE=10V, f=1KHz 75 Collector Base Time Constant rb'CC IE=20mA, VCE=20V, f=31.8MHz pS Noise Figure NF IC=100µA, VCE=10V, RS=IKΩ, f=1KHz, Bw=1KHz dB Real Part of Common Emitter High Frequency Input Impedance Re(hie) IC=20mA, VCE=20V, f=300MHz Ω SWITCHING TIME DESCRIPTION SYMBOL TEST CONDITION MIN UNIT Delay Time td ns Rise Time tr ns Storage Time ts ns Fall Time tf ns *Pulse Test: Pulse Width < 300mms, Duty Cycle < 2% TN2222ARev080304E MAX 4.0 225 IC=150mA, IB1=15mA, VCC=30V, VBE(off)=0.5V IC=150mA, IB1= IB2=15mA, VCC=30V 300 375 150 0.3 8.0 1.0 MAX MAX 1.2 2.0 E B C Continental Device India Limited Data Sheet Page 2 of 5
The TO-237 Package, Tape and Ammo Pack Drawings are correct as on the date of issue/revision of this Data Sheet. The currently valid dimensions and information, may please be confimed from the TO-237 Drawing in the Package and Packing Section of the Product Catalogue. TN2222ARev080304E TO-237 Plastic Package TO-237 Bulk TO-237 T&A 1K/polybag 2K/ammo box 240 gm/1K pcs 725 gm/2K pcs 3" x 7.5" x 7.5" 12.5" x 8" x 1.8" 17" x 15" x 13.5" 17" x 15" x 13.5" 80K 32K 26.2 kgs 13.8 kgs PACKAGE Net Weight/QtyDetails STANDARD PACK INNER CARTON BOX Qty OUTER CARTON BOX Qty Gr WtSize Size Packing Details 3 2 1 D SEC AA E F B D G A A H AK M Dimension With 'M' Uncontrolled Solderability Ensured Beyond 'M' L Mold Parting Line L 123 N J C DIM A B C D E F G H K L J M N MIN. 4.32 4.45 3.18 0.41 0.35 1.14 12.70 1.03 1.982 1.20 MAX. 5.33 5.20 4.19 0.55 0.50 5.40 1.40 2.54 1.20 2.082 1.40
5 DEG
- COLLECTOR 2. BASE 3. EMITTER PIN CONFIGURATION Continental Device India Limited Data Sheet Page 3 of 5
Flat Side of Transistor and Adhesive Tape Visible 2000 pcs./Ammo Pack Label Carrier Strip 186 (7.3") 332 (13") FEED 43(1.7") Tape Mechanical Data A A1 A2 B P (p) C2 W2 DoF2 F Po W1Wo W H2H3 L Ho h1 h1 t hh ITEM SYMBOL SPECIFICATION PULL - OUT FORCE (p) 6N MIN. NOM. BODY WIDTH A1 4.0 4.8 BODY HEIGHT A 4.8 5.2 BODY THICKNESS T 3.9 4.2 COMPONENT ALIGNMENT SIDE VIEW h 0 1.0 COMPONENT ALIGNMENT FRONT VIEW h1 0 1.3 COMPONENT HEIGHT H1 23.25 LENGTH OF SNIPPED LEADS L 11.0 TOTAL TAPE THICKNESS t 1.2 CLINCH HEIGHT HEAT SINK WIDTH HEAT SINK HEIGHT HEAT SINK THICKNESS B 3.0 5.40 2.54 0.45 LEAD PARALLELISM | C1 - C2 | 0.22 MAX. PITCH OF COMPONENT P 12.7 ± 1.0 FEED HOLE PITCH Po 12.7 ± 0.3 FEED HOLE CENTRE TO COMPONENT CENTRE P2 6.35 ± 0.4 DISTANCE BETWEEN OUTER LEADS F 5.08 + 0.6 - 0.2 TAPE WIDTH W 18 ± 0.5 HOLD-DOWN TAPE WIDTH Wo 6 ± 0.2 HOLE POSITION W1 9 + 0.7 - 0.5 HOLD-DOWN TAPE POSITION W2 0.5 ± 0.2 LEAD WIRE CLINCH HEIGHT Ho 16 ± 0.5 FEED HOLE DIAMETER Do 4 ± 0.2 LEAD - TO - LEAD DISTANCE F1, F2 2.54 + 0.4 STAND OFF H2 0.45 1.45 TOL . - 0.1 All dimensions are in mm 3*4* At top of body3* At top of body4* t1 0.3 – 0.6 mm5* 1 Cumulative pitch error 1.0 mm/20 pitch* *2 To be measured at bottom of clinch REMARKS NOTES Maximum alignment deviation between leads will not to be greater than 0.2mm. Maximum non-cumulative variation between tape feed holes shall not exceed 1 mm in 20 pitches. Holddown tape will not exceed beyond the edge(s) of carrier tape and there shall be no exposure of adhesive. There will be no more than three (3) consecutive missing components in a tape. A tape trailer, having at least three feed holes are provided after the last component in a tape. Splices should not interfere with the sprocket feed holes. Continental Device India Limited Data Sheet Page 4 of 5
C The product information and the selection guides facilitate selection of the CDIL's Discrete Semiconductor Device(s) best suited for application in your product(s) as per your requirement. It is recommended that you completely review our Data Sheet(s) so as to confirm that the Device(s) meet functionality parameters for your application. The information furnished in the Data Sheet and on the CDIL Web Site/CD are believed to be accurate and reliable. CDIL however, does not assume responsibility for inaccuracies or incomplete information. Furthermore, CDIL does not assume liability whatsoever, arising out of the application or use of any CDIL product; neither does it convey any license under its patent rights nor rights of others. These products are not designed for use in life saving/support appliances or systems. CDIL customers selling these products (either as individual Discrete Semiconductor Devices or incorporated in their end products), in any life saving/support appliances or systems or applications do so at their own risk and CDIL will not be responsible for any damages resulting from such sale(s). CDIL strives for continuous improvement and reserves the right to change the specifications of its products without prior notice. CDIL is a registered Trademark of Continental Device India Limited C-120 Naraina Industrial Area, New Delhi 110 028, India. Telephone + 91-11-2579 6150, 5141 1112 Fax + 91-11-2579 5290, 5141 1119 email@cdil.com www.cdilsemi.com Continental Device India Limited Data Sheet Page 5 of 5