TN0222CA1583

TN0222CA1583 TAI-SAW | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 18

Technical content

TAI-SAW TECHNOLOGY CO., LTD. FR-71S03-02 TST DCC Release document TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: tstsales@mail.taisaw.com W e b : www.taisaw.com Product Specifications Approval Sheet Product Name: GPS L5 Band 1176.45MHz Front-End Module 1.5x1.1 mm ( B W = 2 5 M H z ) TST Parts No.: TN0222CA1583 (This Part is qualified with AEC-Q100) C u s t o m e r P a r t N o . : C o m p a n y : D i v i s i o n : A p p r o v e d b y : D a t e : C h e c k e d b y : J e r r y L o Approval by: Kazuma Lee Date: 2025/05/28 1. Customer signed back is required before TST c an proceed with sample build and receive orders. 2. Orders received without customer signed back will be regarded as agreement on the specifications. 3. Any specifications changes must be approved upon by both parties and a new revision of specifications shall be released to reflect the changes.

TAI-SAW TECHNOLOGY CO., LTD. 2 TST DCC Release document TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: tstsales@mail.taisaw.com W e b : www.taisaw.com GPS L5 Band Front-End Module 1.5x1.1 mm MODEL NO.: TN0222CA1583 REV. NO.:1.0 A. GENERAL DESCRIPTION : 1. The TN0222CA1583 is a front-end module (FEM) designed for GPS L5 band applications. 2. The TN0222CA1583 offers low noise figure, high linearity, and high out-band rejection characteristics brought by included high performance pre-SAW filter and low noise amplifier (LNA). 3. The TN0222CA1583 offers only two external components, and very small package that is 1.5x1.1mm. B. RECOMMENDED OPERATING CONDITION : (Ta=25 ℃) PARAMETER SYMBOL MIN. TYP. MAX. UNIT Supply Voltage V DD 1.5 - 3.42 V C. ABSOLUTE MAXIMUM RATINGS : 1. Supply voltage: VDD=5 V 2. Control voltage: VCTL=5 V 3. Input power:  PIN (inband): +10 dBm(VDD=2.8 V, f=1176.45, 1164~1189 MHz)  PIN (outband): +25 dBm(VDD=2.8 V, f=50~1050, 1250~4000 MHz) 4. Power dissipation: PD=500 mW(4-layer FR4 PCB with through-hole(101.5x114.5 mm), Tj=100 ° C ) 5. Terminating source impedance: Zs = 50 (Single-ended) Terminating load impedance: ZL = 50 (Single-ended) 6. Operating temperature range: -40 °C to +105 °C 7. Storage temperature range: -40 °C to +110 °C D. FEATURES 1. Low supply voltage: 1.8/ 2.8 V typ. 2. Low current consumption:  0.1 μA typ.(at VDD=1.8/ 2.8 V, VCTL=0 V (Stand-by mode)) 4. Low noise figure: Electrostatic Sensitive Device (ESD)

TAI-SAW TECHNOLOGY CO., LTD. 3 TST DCC Release document 5. High out band rejection(at VDD=1.8/ 2.8 V, VCTL=1.8 V):  50 dBc typ.( f=704~915 MHz, relative to 1176.45 MHz)  51 dBc typ.( f=1559~1606 MHz, relative to 1176.45 MHz)  65 dBc typ.( f=1710~1980 MHz, relative to 1176.45 MHz)  66 dBc typ.(f=2400~2500 MHz, relative to 1176.45 MHz) 7. Moisture Sensitivity Level: Level 1 E. ELECTRICAL CHARACTERISTICS 1 (DC) : (General conditions: Ta=+25 °C) Parameters Description Symbol Unit Min. Typ. Max. Supply Voltage V DD V 1.5 - 3.3 Control Voltage (High) V CTL(H) V 1.5 1.8 3.3 Control Voltage (Low) V CTL(L) V 0 0 0.3 Supply Current 1 RF OFF, V DD=2.8 V, VCTL=1.8 V I DD1 mA - 3.7 - Supply Current 2 RF OFF, V DD=1.8 V, VCTL=1.8 V I DD2 mA - 3.0 - Supply Current 3 RF OFF, V DD=2.8 V, VCTL=0 V I DD3 μA - 0.1 3.0 Supply Current 4 RF OFF, V DD=1.8 V, VCTL=0 V I DD4 μA - 0.1 3.0 Control Current V CTL=1.8 V I CTL μA - 5.0 12.0 F. ELECTRICAL CHARACTERISTICS 2 (RF) : (General conditions: VDD=2.8 V, VCTL=1.8 V, fRF=1176.45 MHz, 1164~1189, Ta=+25 °C, Zs=Zl=50 ohm, with application circuit) Parameters Description Symbol Unit Min. Typ. Max. Small Signal Gain (GPS) f=1176.45MHz (GPS) Exclude PCB, Connector Losses(0.17 dB) GainGPS1 dB 17 18 - Noise Figure (GPS) f=1176.45 MHz (GPS) Exclude PCB,Connector Losses (0.09 dB) NFGPS1 dB - 1.85 2 Input Power at 1dB Gain, Compression Point f=1176.45 MHz P-1dB(IN)1 dBm - -9.8 - Input 3rd Order Intercept Point f1=1176.45 MHz, f2=f1 +/-1 MHz, Pin=-30 dBm IIP3_1 dBm - -1.5 - Low Band Rejection f=704 to 915 MHz, relative to 1176.45 MHz BR_L1 dBc 42 50 -

TAI-SAW TECHNOLOGY CO., LTD. 4 TST DCC Release document GPS, GNS, BeiDou Rejection f=1559 to 1606 MHz, relative to 1176.45 MHz BR_G1 dBc 45 51 - High Band Rejection f=1710 to 1980 MHz, relative to 1176.45 MHz BR_H dBc 52 65 - WLAN Band Rejection f=2400 to 2500 MHz, relative to 1176.45 MHz BR_W dBc 60 66 - RF IN Return Loss (GPS) f=1176.45 MHz (GPS L5) RLiGPS dB 9 11.5 - RF OUT Return Loss(GPS) f=1176.45 MHz (GPS L5) RLoGPS dB 9 13 - Group Delay Time Deviation f=1164 to 1189 MHz (GPS L5) GDTGLN1 ns - 7 20

TAI-SAW TECHNOLOGY CO., LTD. 5 TST DCC Release document ELECTRICAL CHARACTERISTICS 3 (RF): (General conditions: VDD=1.8 V, VCTL=1.8 V, fRF=1176.45 MHz, 1164 to 1189, Ta=+25 °C, Zs=Zl=50 ohm, with application circuit) Parameters Description Symbol Unit Min. Typ. Max. Small Signal Gain (GPS) f=1176.45MHz (GPS) Exclude PCB, Connector Losses(0.17 dB) GainGPS 1 dB 16.5 17.5 - Noise Figure (GPS) f=1176.45 MHz (GPS) Exclude PCB,Connector Losses (0.09 dB) NFGPS1 dB - 2 2.2 Input Power at 1dB Gain, Compression Point f=1176.45 MHz P-1dB(IN) 1 dBm - -9.8 - Input 3rd Order Intercept Point f1=1176.45 MHz, f2=f1 +/-1 MHz, Pin=-30 dBm IIP3_1 dBm - -1.5 - Low Band Rejection f=704 to 915 MHz, relative to 1176.45 MHz BR_L1 dBc 42 50 - GPS, GNS, BeiDou Rejection f=1559 to 1606 MHz, relative to 1176.45 MHz BR_G1 dBc 45 51 - High Band Rejection f=1710 to 1980 MHz, relative to 1176.45 MHz BR_H dBc 52 65 - WLAN Band Rejection f=2400 to 2500 MHz, relative to 1176.45 MHz BR_W dBc 60 66 - RF IN Return Loss (GPS) f=1176.45 MHz (GPS L5) RLiGPS dB 8.5 11 - RF OUT Return Loss(GPS) f=1176.45 MHz (GPS L5) RLoGPS dB 8.5 12.5 - Group Delay Time Deviation f=1164 to 1189 MHz (GPS L5) GDTGLN ns - 7 20

TAI-SAW TECHNOLOGY CO., LTD. 6 TST DCC Release document FREQUENCY CHARACTERISTICS 1: (Conditions: VDD=2.8 V, VCTL=1.8 V, Ta=25 °C, Zs=Zl=50 ohm, with application circuit.) Transfer function: S21 response (span: 300 MHz) S21 response(span: 3 GHz)

TAI-SAW TECHNOLOGY CO., LTD. 7 TST DCC Release document Group Delay

TAI-SAW TECHNOLOGY CO., LTD. 8 TST DCC Release document Reflection functions: S11 VSWR S22 VSWR

TAI-SAW TECHNOLOGY CO., LTD. 9 TST DCC Release document S11 Smith Chart S22 Smith Chart

TAI-SAW TECHNOLOGY CO., LTD. 10 TST DCC Release document S11 Return Loss S22 Return Loss

TAI-SAW TECHNOLOGY CO., LTD. 11 TST DCC Release document G. MEASUREMENT CIRCUIT : Parts ID Manufacture Value L1 Murata LQW15AN_00 Series 27nH C1 Murata GRM03 Series 1000pF

TAI-SAW TECHNOLOGY CO., LTD. 12 TST DCC Release document H. PACKAGE OUTLINE : UNIT: mm Top View Side View Bottom View Electrode Dimensions clearance: ±0.05 mm Stand-off: 0.1 mm max. Substrate: Ceramic Terminal treat: Au Lid: SnAg/Kovar/Ni Weight (typ.): 5 mg

TAI-SAW TECHNOLOGY CO., LTD. 13 TST DCC Release document I. OUTLINE DRAWING : □ : Year/Month Code (Follow the table) YEAR/Month 1 2 3 4 5 6 7 8 9 10 11 12

2021 A B C D E F G H J K LM

2022 N P Q R S T U V W X YZ

2023 a b c d e f gh j k l m 2024 n p q r s t u v w x y z

2025 A B C D E F G H J K L M

2026 N P Q R S T U V W X Y Z

2027 a b c d e f g h j k l m 2028 n p q r s t u v w x y z J. PIN CONFIGURATION: TRUTH TABLE “H”=VCTL(H), “L”=VCTL(L) VCTL Mode H Active mode L Stand-by mode e

TAI-SAW TECHNOLOGY CO., LTD. 14 TST DCC Release document No. SYMBOL DESCRIPTION 1 VDD Supply voltage terminal. Please connect bypass capacitor C1 with ground as close as possible. 2 VCTL Control voltage terminal. 3 GND Ground terminal. This terminal should be connected to the ground plane as close as possible for excellent RF performance. 4 PreIN RF input terminal. This terminal connects to input of pre-SAW filter. 5 GND Ground terminal. This terminal should be connected to the ground plane as close as possible for excellent RF performance. 6 PreOUT Pre-SAW filter output terminal. This terminal connects to LNAIN with L1. 7 LNAIN RF input terminal. This terminal requires only a matching inductor L1, and does not require DC blocking capacitor because of integrated capacitor. 8 LNAOUT RF output terminal. This terminal requires no DC blocking capacitor since this terminal has integrated DC blocking capacitor. 9 GND Ground terminal. This terminal should be connected to the ground plane as close as possible for excellent RF performance. 10 GND Ground terminal. This terminal should be connected to the ground plane as close as possible for excellent RF performance. K. EVALUATION BOARD PCB Substrate: TLX-9 Thickness: 0.12 mm Microstrip line width: 0.322 mm(Z 0=50 Ω) Size: 14.0 mm x 14.0 mm

TAI-SAW TECHNOLOGY CO., LTD. 15 TST DCC Release document <PCB LAYOUT GUIDELINE> PRECAUTIONS Please layout ground pattern under this FEM in order not to couple with RFIN and RFOUT terminal.

• All external parts should be placed as close as possible to the FEM.
• For good RF performance, all GND terminals must be connected to PCB ground plane of substrate, and via-holes for GND should be placed near the FEM. GND Via Hole Diameter = 0.2 mm PKG Terminal PCB PKG Outline

TAI-SAW TECHNOLOGY CO., LTD. 16 TST DCC Release document L. RECOMMENDED FOOTPRINT PATTERN : : Land : Mask (Open area) *Metal mask thickness: 100 m : Resist (Open area) PKG: 1.5 mm x 1.1 mm Pin pitch: 0.39 mm

TAI-SAW TECHNOLOGY CO., LTD. 17 TST DCC Release document M. PACKING SPECIFICATION : (Please refer to FR-75D10 for packing quantity) 2.TAPE DIMENSION Direction of Feed

TAI-SAW TECHNOLOGY CO., LTD. 18 TST DCC Release document N. RECOMMENDED REFLOW PROFILE : Cautions on using this product This product contains Gallium-Arsenide (GaAs) which is a harmful material.  Do NOT eat or put into mouth.  Do NOT dispose in fire or break up this product.  Do NOT chemically make gas or powder with this product.  To waste this product, please obey the relating law of your country. This product may be damaged with electric static discharge (ESD) or spike voltage. Please handle with care to avoid these damages.