TN0157A TAI-SAW | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 18

Technical content

TAI-SAW TECHNOLOGY CO., LTD. FR-71S03-02 TST DCC Release document TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping -Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: tstsales@mail.taisaw.com Web: www.taisaw.com Product Specifications Approval Sheet Product Name: GPS L2+ Galileo E5b Band 1227.6MHz Front-End Module 1.5x1.1 mm(BW=52MHz) TST Parts No.: TN0157A (This Part is qualified with AEC-Q100) Customer Part No.: Company: Division: Approved by : Date: Checked by: Jerry Xu Approval by: Ryan Huang Date: 2019/09/04 1. Customer signed back is required before TST can pro ceed with sample build and receive orders. 2. Orders received without customer signed back will be regarded as agreement on the specifications. 3. Any specifications changes must be approved upon by b oth parties and a new revision of specifications shall be released to reflect the changes.

TAI-SAW TECHNOLOGY CO., LTD. 2TST DCC Release document TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping -Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: tstsales@mail.taisaw.com Web: www.taisaw.com GPS L2+E5b Band Front-End Module 1.5x1.1 mm MODEL NO.: TN0157A REV. NO.:1.0 A. GENERAL DESCRIPTION : 1. The TN0157A is a front-end module (FEM) designed for GPS L2 and Galileo E5b band applications. 2. The TN0157A offers low noise figure, high linearity, and high out-band rejection characteristics brought by included high performance pre-SAW filter and low noise amplifier (LNA). 3. The TN0157A offers only two external components, and very small package that is 1.5x1.1mm. B. RECOMMENDED OPERATING CONDITION : (Ta=25 ℃℃ ℃℃) PARAMETER SYMBOL MIN. TYP. MAX. UNIT Supply Voltage VDD 1.5 - 3.42 V C. ABSOLUTE MAXIMUM RATINGS : 1. Supply voltage: VDD =5 V 2. Control voltage: VCTL =5 V 3. Input power: /circle6 PIN (inband): +10 dBm(VDD =2.8 V, f=1227.6, 1215~1239.6 MHz) /circle6 PIN (outband): +25 dBm(VDD =2.8 V, f=50~1050, 1250~4000 MHz) 4. Power dissipation: PD=500 mW (4-layer FR4 PCB with through-hole(101.5x114.5 mm), Tj=100 ° C) 5. Terminating source impedance: Zs = 50 (Single-ended) Terminating load impedance: ZL = 50 (Sing le-ended) 6. Operating temperature range: -40 ° C to +105 ° C 7. Storage temperature range: -40 ° C to +110 ° C D. FEATURES 1. Low supply voltage: 1.8/ 2.8 V typ. 2. Low current consumption: /circle6 0.1 µA typ.(at VDD =1.8/ 2.8 V, V CTL =0 V (Stand-by mode)) 4. Low noise figure: Electrostatic Sensitive Device ( ESD )

TAI-SAW TECHNOLOGY CO., LTD. 3TST DCC Release document 5. High out band rejection(at VDD =2.8 V, V CTL =2.8 V): /circle6 45 dBc typ.( f=1559~1606 MHz, relative to 1227.6 MHz) /circle6 57 dBc typ.( f=1710~1980 MHz, relative to 1227.6 MHz) /circle6 67 dBc typ.(f=2400~2500 MHz, relative to 1227.6 MHz) 7. Moisture Sensitivity Level: Level 3 E. ELECTRICAL CHARACTERISTICS 1 (DC) : (General conditions: T a=+25 ° C) Parameters Description Symbol Unit Min. Typ. Max. Supply Voltage VDD V 1.5 - 3.3 Control Voltage (High) VCTL(H) V 1.5 1.8 3.3 Control Voltage (Low) VCTL(L) V 0 0 0.3 Supply Current 1 RF OFF, V DD =2.8 V, V CTL =1.8 V I DD1 mA - 3.7 - Supply Current 2 RF OFF, V DD =1.8 V, V CTL =1.8 V I DD2 mA - 3.0 - Supply Current 3 RF OFF, V DD =2.8 V, V CTL =0 V I DD3 µA - 0.1 3.0 Supply Current 4 RF OFF, V DD =1.8 V, V CTL =0 V I DD4 µA - 0.1 3.0 Control Current V CTL =1.8 V I CTL µA - 5.0 12.0 F. ELECTRICAL CHARACTERISTICS 2 (RF) (General conditions: VDD =2.8 V, V CTL =2.8 V, f RF =1227.6 MHz, 1197~1249, Ta=+25 ° C, Z s=Z l=50 ohm, with application circuit) Parameters Description Symbol Unit Min. Typ. Max. Small Signal Gain (GPS) f=1227.6MHz (GPS) Exclude PCB, Connector Losses(0.17 dB) GainGPS1 dB 17 17.9 - Noise Figure (GPS) f=1227.6 MHz (GPS) Exclude PCB,Connector Losses (0.09 dB) NFGPS1 dB - 2.2 2.8 Input Power at 1dB Gain, Compression Point f= 1227.6 MHz P-1dB(IN)1 dBm - -9.8 - Input 3rd Order Intercept Point f1=1227.6 MHz, f2=f1 +/-1 MHz, Pin=-30 dBm IIP3_1 dBm - -1.5 - Low Band Rejection f= 704 to 915MHz, relative to 1176.45 MHz BR_L1 dBc 40 46 - GPS, GNS, BeiDou Rejection f=1559 to 1606 MHz, relative to 1227.6 MHz BR_G1 dBc 40 45

TAI-SAW TECHNOLOGY CO., LTD. 4TST DCC Release document High Band Rejection f=1710 to 1980 MHz, relative to 1227.6 MHz BR_H dBc 50 57 - WLAN Band Rejection f=2400 to 2500 MHz, relative to 1227.6 MHz BR_W dBc 60 67 - RF IN Return Loss (GPS) f=1227.6 MHz (GPS L2) RLiGPS dB 14 19 - RF OUT Return Loss(GPS) f=1227.6 MHz (GPS L2) RLoGPS dB 18 23.4 - Group Delay Time Deviation f=1215 to 1237 MHz (GPS L2) GDTGLN1 ns - 12 22

TAI-SAW TECHNOLOGY CO., LTD. 5TST DCC Release document ELECTRICAL CHARACTERISTICS 3 (RF) : (General conditions: VDD =1.8 V, V CTL =1.8 V, f RF =1227.6 MHz, 1197 to 1249, Ta=+25 ° C, Z s=Z l=50 ohm, with application circuit) Parameters Description Symbol Unit Min. Typ. Max. Small Signal Gain (GPS) f=1227.6MHz (GPS) Exclude PCB, Connector Losses(0.17 dB) GainGPS 1 dB 16 17.2 Noise Figure (GPS) f=1227.6 MHz (GPS) Exclude PCB,Connector Losses (0.07 dB) NFGPS1 dB - 2.28 2.8 Input Power at 1dB Gain, Compression Point f= 1227.6 MHz P-1dB(IN) 1 dBm - -9.8 - Input 3rd Order Intercept Point f1=1227.6 MHz, f2=f1 +/-1 MHz, Pin=-30 dBm IIP3_1 dBm - -1.5 - Low Band Rejection f= 704 to 915MHz, relative to 1227.6 MHz BR_L1 dBc 40 46 - GPS, GNS, BeiDou Rejection f=1559 to 1606 MHz, relative to 1227.6 MHz BR_G1 dBc 40 46 High Band Rejection f=1710 to 1980 MHz, relative to 1227.6 MHz BR_H dBc 50 58 - WLAN Band Rejection f=2400 to 2500 MHz, relative to 1227.6 MHz BR_W dBc 60 67 - RF IN Return Loss (GPS) f=1227.6 MHz (GPS L2) RLiGPS dB 8 12 - RF OUT Return Loss(GPS) f=1227.6 MHz (GPS L2) RLoGPS dB 17 23 - Group Delay Time Deviation f=1197 to 1249 MHz (GPS L2+E5b) GDTGLN ns - 12 22 Group Delay Time Deviation f=1215 to 1239.6 MHz (GPS L2) GDTGLN ns - 2.3 10

TAI-SAW TECHNOLOGY CO., LTD. 6TST DCC Release document FREQUENCY CHARACTERISTICS 1: (Conditions: V DD =2.8 V, VCTL =2.8 V, Ta=25 ° C, Z s=Z l=50 ohm, with application circuit.) Transfer function: S21 response (span: 200 MHz) S21 response

TAI-SAW TECHNOLOGY CO., LTD. 7TST DCC Release document Group Delay (L2) Group Delay (L2+E5b)

TAI-SAW TECHNOLOGY CO., LTD. 8TST DCC Release document Reflection functions: S11 VSWR S22 VSWR

TAI-SAW TECHNOLOGY CO., LTD. 9TST DCC Release document S11 Smith Chart S22 Smith Chart

TAI-SAW TECHNOLOGY CO., LTD. 10 TST DCC Release document S11 Return Loss S22 Return Loss

TAI-SAW TECHNOLOGY CO., LTD. 11 TST DCC Release document G. MEASUREMENT CIRCUIT : Parts ID Manufacture Value L1 Murata LQW15A _00 Series 24nH C1 Murata GRM03 Series 1000pF L3 Murata LQW15A Series 10nH C3 Murata LQW15A Series 8.0pF C2 Murata GRM03 Series 1.0pF L4 Murata GRM03 Series 6.8nH

TAI-SAW TECHNOLOGY CO., LTD. 12 TST DCC Release document H. PACKAGE OUTLINE : UNIT: mm Top View Side View Bottom View Electrode Dimensions clearance: ±0.05 mm Stand-off: 0.1 mm max. Substrate: Ceramic Terminal treat: Au Lid: Epoxy film Weight (typ.): 5 mg

TAI-SAW TECHNOLOGY CO., LTD. 13 TST DCC Release document I. OUTLINE DRAWING : PIN CONFIGURATION : TRUTH TABLE “H”=V CTL (H), “L”=V CTL (L) VCTL Mode H Active mode L Stand-by mode

TAI-SAW TECHNOLOGY CO., LTD. 14 TST DCC Release document No. SYMBOL DESCRIPTION 1 VDD Supply voltage terminal. Please connect bypass capacitor C1 with ground as close as possible. 2 VCTL Control voltage terminal. 3 GND Ground terminal. This terminal should be connected to the ground plane as close as possible for excellent RF performance. 4 PreIN RF input terminal. This terminal connects to i nput of pre-SAW filter. 5 GND Ground terminal. This terminal should be connected to the ground plane as close as possible for excellent RF performance. 6 PreOUT Pre-SAW filter output terminal. This termin al connects to LNAIN with L1. 7 LNAIN RF input terminal. This terminal requires only a matching inductor L1, and does not require DC blocking capacitor because of integrated capacitor. 8 LNAOUT RF output terminal. This terminal requires no DC blocking capacitor since this terminal has integrated DC blocking capacitor. 9 GND Ground terminal. This terminal should be connected to the ground plane as close as possible for excellent RF performance. 10 GND Ground terminal. This terminal should be connected to the ground plane as close as possible for excellent RF performance. K. EVALUATION BOARD PCB Substrate: TLX-9 Thickness: 0.12 mm Microstrip line width: 0.322 mm(Z0=50 Ω) Size: 14.0 mm x 14.0 mm

TAI-SAW TECHNOLOGY CO., LTD. 15 TST DCC Release document <PCB LAYOUT GUIDELINE> PRECAUTIONS

  • Please layout ground pattern under this FEM in order not to couple with RFIN and RFOUT terminal.
  • All external parts should be placed as close as possible to the FEM.
  • For good RF performance, all GND terminals must be connected to PCB ground plane of substrate, and via-holes for GND should be placed near the FEM. GND Via Hole Diameter = 0.2 mm PKG Terminal PCB PKG Outline

TAI-SAW TECHNOLOGY CO., LTD. 16 TST DCC Release document L. RECOMMENDED FOOTPRINT PATTERN : : Land : Mask (Open area) *Metal mask thickness: 100 µ m : Resist (Open area) PKG: 1.5 mm x 1.1 mm Pin pitch: 0.39 mm

TAI-SAW TECHNOLOGY CO., LTD. 17 TST DCC Release document M. PACKING SPECIFICATION :

TAI-SAW TECHNOLOGY CO., LTD. 18 TST DCC Release document N. RECOMMENDED REFLOW PROFILE : Cautions on using this product This product contains Gallium-Arsenide (GaAs) which is a harmful material.

  • Do NOT eat or put into mouth.
  • Do NOT dispose in fire or break up this product.
  • Do NOT chemically make gas or powder with this pro duct.
  • To waste this product, please obey the relating law of your country. This product may be damaged with electric static di scharge (ESD) or spike voltage. Please handle with care to avoid these damages.