TN0081B

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 22

Technical content

TAI-SAW TECHNOLOGY CO., LTD. FR-71S03-02 AI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping -Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: tstsales@mail.taisaw.com Web: www.taisaw.com Product Specifications Approval Sheet Product Description: GPS, GLONASS, Beidou and Galileo Front-End Module 2.5x2.5 mm TST Part No.: TN0081B Customer Part No.: Checked by: Hayley Chou Approved by: Andy Yu Date: 2020/07/08 1. Customer signed back is required before TST can pro ceed with sample build and receive orders. 2. Orders received without customer signed back will be regarded as agreement on the specifications. 3. Any specifications changes must be approved upon by b oth parties and a new revision of specifications shall be released to reflect the changes. Customer signature required Company: Division: Approved by : Date:

TAI-SAW TECHNO LOGY CO., LTD. 2 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping -Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: tstsales@mail.taisaw.com Web: www.taisaw.com GPS, GLONASS, BeiDou and Galileo Front-End Module 2 .5x2.5 mm MODEL NO.: TN0081B REV. NO.:2.0 A. GENERAL DESCRIPTION: 1. The TN0081B is a front-end module (FEM) designed for GPS, GLONASS, BeiDou and Galileo applications. 2. The TN0081B offers high gain, low noise figure, high linearity and very high out-band rejection characteristics brought by included high performance pre- SAW filter, low noise amplifier (LNA) and post- SAW filter. 3. The TN0081B offers only two external components and very small HFFP10-CD package that is 2.5x2.5 mm. 4. Moisture Sensitivity Level: Level 1(MSL1) B. ABSOLUTE MAXIMUM RATINGS 1. Supply voltage: VDD =5 V 2. Control voltage: VCTL =5 V 3. Input power: /circle6 PIN (inband): +15 dBm(VDD =2.8 V, f=1575, 1597~1606 MHz) /circle6 PIN (outband): +27 dBm(VDD =2.8 V, f=50~1460, 1710~4000 MHz) 4. Power dissipation: PD=580 mW (4-layer FR4 PCB with through-hole(101.5x114.5 mm), Tj=110 ° C) 5. Terminating source impedance: Zs = 50 (Single-ended) Terminating load impedance: ZL = 50 (Sing le-ended) 6. Operating temperature range: -40 ° C to +105 ° C 7. Storage temperature range: -40 ° C to +110 ° C C. FEATURES 1. Available for GPS, GLONASS, BeiDou and Galileo 2. Low supply voltage: 1.8/ 2.8 V typ. 3. Low current consumption: /circle6 0.1 µA typ.(at VDD =1.8/ 2.8 V, V CTL =0 V (Stand-by mode)) 1559~1591 MHz ) 5. Low noise figure: Electrostatic Sensitive Device ( ESD )

TAI-SAW TECHNO LOGY CO., LTD. 3 6. High out band rejection(at VDD =1.8/ 2.8 V, V CTL =1.8 V): /circle6 85 dBc typ.( f=704~915 MHz, relative to 1575 MHz) /circle6 75 dBc typ.( f=1710~1980 MHz, relative to 1575 MHz) 8. Moisture Sensitivity Level: Level 1 D. ELECTRICAL CHARACTERISTICS 1 (DC) (General conditions: T a=+25 ° C) Parameters Description Symbol Unit Min. Typ. Max. Supply Voltage VDD V 1.5 - 3.3 Control Voltage (High) VCTL(H) V 1.5 1.8 3.3 Control Voltage (Low) VCTL(L) V 0 0 0.3 Supply Current 1 RF OFF, V DD =2.8 V, V CTL =1.8 V IDD1 mA - 3.3 6.4 Supply Current 2 RF OFF, V DD =1.8 V, V CTL =1.8 V IDD2 mA - 2.6 5.9 Supply Current 3 RF OFF, VDD =2.8 V, V CTL =0 V IDD3 µA - 0.1 5.0 Supply Current 4 RF OFF, V DD =1.8 V, V CTL =0 V IDD4 µA - 0.1 5.0 Control Current V CTL =1.8 V I CTL µA - 5.0 15.0 E. ELECTRICAL CHARACTERISTICS 2 (RF): (General conditions: VDD =2.8 V, V CTL= 1.8 V, f RF =1575 MHz, 1597~1606 MHz, 1559~1591 MHz Ta=+25 ° C, Zs=Z l=50 ohm, with application circuit) Parameters Description Symbol Unit Min. Typ. Max. Small Signal Gain (GPS)1 f=1575 MHz (GPS) Exclude PCB, Connector Losses(0.19 dB) GainGPS1 dB 17.0 18.5 - Small Signal Gain (GLONASS)1 f=1597~1606 MHz(GLONASS) Exclude PCB, Connector Losses(0.19 dB) GainGLN1 dB 17.0 18.5 - Small Signal Gain (BeiDou, Galileo)1 f=1559~1591 MHz(BeiDou, Galileo) Exclude PCB, Connector Losses(0.19 dB) GainBG1 dB 17.0 18.5 - Noise Figure (GPS)1 f=1575 MHz (GPS) Exclude PCB, Connector Losses(0.09 dB) NFGPS1 dB - 1.6 2.1 Noise Figure (GLONASS)1 f=1597~1606 MHz (GLONASS) Exclude PCB, Connector Losses(0.09 dB) NFGLN1 dB - 1.7 2.2 Noise Figure (BeiDou, Galileo)1 f=1559~1591 MHz(BeiDou, Galileo) Exclude PCB, Connector Losses(0.09 dB) NFBG1 dB - 1.7 2.2

TAI-SAW TECHNO LOGY CO., LTD. 4 Input Power at 1dB Gain Compression Point 1 f=1575, 1597~1606 MHz, 1559~1591 MHz P-1dB(IN)1 dBm - -15.0 - Input 3rd Order Intercept Point 1 f1=1575 MHz, f2=f1+/- 1 MHz, Pin=-30 dBm IIP3_1 dBm - -3.0 - Out of Band Input 2nd Order Intercept Point 1 f1=824.6 MHz at +15 dBm, f2=2400 MHz at +15 dBm, fmeas=1575.4 MHz IIP2_OB1 dBm - +72 - Out of Band Input 3rd Order Intercept Point 1 f1=1712.7 MHz at +15 dBm, f2=1850 MHz at +15 dBm, fmeas=1575.4 MHz IIP3_OB1 dBm - +50 - 700MHz Harmonic1 Input jammer tone: 787.76 MHz at +15 dBm Measure the harmonic tone at 1575.52 MHz 2fo1 dBm - -30 - Out-of-Band Input Power 1dB Compression 1 fjam=900 MHz, fmeas=1575 MHz at Pin=-40 dBm P-1dB(IN) _OB1-1 dBm - +24 - fjam=1710 MHz, fmeas=1575 MHz at Pin=-40 dBm P-1dB(IN) _OB1-2 dBm - +24 - Low Band Rejection 1 f=704~915 MHz, relative to 1575 MHz BR_L1 dBc - 85 - High Band Rejection 1 f=1710~1980MHz, relative to 1575MHz BR_H1 dBc - 75 - WLAN Band Rejection f=2400~2500 MHz, relative to 1575 MHz BR_W1 dBc - 72 - RF IN Return Loss(GPS)1 f=1575 MHz (GPS) RLiGPS1 dB - 7.5 - RF IN Return Loss(GLONASS)1 f=1597~1606 MHz(GLONASS) RLiGLN1 dB - 7.5 - RF IN Return Loss(BeiDou, Galileo)1 f=1559~1591 MHz(BeiDou, Galileo) RLiBG1 dB - 4.2 - RF OUT Return Loss(GPS)1 f=1575 MHz(GPS) RLoGPS1 dB - 11 - RF OUT Return Loss(GLONASS)1 f=1597~1606 MHz(GLONASS) RLoGLN1 dB - 15 - RF OUT Return Loss(BeiDou, Galileo)1 f=1559~1591 MHz(BeiDou, Galileo) RLoBG1 dB - 7.4 - Group Delay Time Deviation (GLONASS)1 f=1597~1606 MHz(GLONASS) GDTGLN1 ns - 8.0 - Group Delay Time Deviation (BeiDou, Galileo)1 f=1559~1591 MHz(BeiDou, Galileo) GDTBG1 ns - 35 - F. ELECTRICAL CHARACTERISTICS 3 (RF) (General conditions: VDD =1.8 V, V CTL =1.8 V, f RF =1575 MHz, 1597~1606 MHz, 1559~1591 MHz, Ta=+25 ° C, Z s=Z l=50 ohm, with application circuit) Parameters Description Symbol Unit Min. Typ. Max. Small Signal Gain (GPS)2 f=1575 MHz (GPS) Exclude PCB, Connector Losses GainGPS2 dB 15.5 17.5 -

TAI-SAW TECHNO LOGY CO., LTD. 5 Small Signal Gain (GLONASS)2 f=1597~1606 MHz (GLONASS) Exclude PCB, Connector Losses GainGLN2 dB 15.5 17.5 - Small Signal Gain (BeiDou, Galileo)2 f=1559~1591 MHz (BeiDou, Galileo) Exclude PCB, Connector Losses GainBG2 dB 15.5 17.5 - Noise Figure (GPS)2 f=1575 MHz (GPS) Exclude PCB, Connector Losses NFGPS2 dB - 1.65 2.20 Noise Figure (GLONASS)2 f=1597~1606 MHz (GLONASS) Exclude PCB, Connector Losses NFGLN2 dB - 1.75 2.35 Noise Figure (BeiDou, Galileo)2 f=1559~1591 MHz (BeiDou, Galileo) Exclude PCB, Connector Losses NFBG2 dB - 1.75 2.35 Input Power at 1dB Gain Compression Point 2 f=1575, 1597~1606 MHz, 1559~1591 MHz P-1dB(IN)2 dBm - -17.0 - Input 3rd Order Intercept Point 2 f1=1575 MHz, f2=f1+/- 1 MHz, Pin=-30 dBm IIP3_2 dBm - -6.0 - Out of Band Input 2nd Order Intercept Point 1 f1=824.6 MHz at +15 dBm, f2=2400 MHz at +15 dBm, fmeas=1575.4 MHz IIP2_OB2 dBm - +72 - Out of Band Input 3rd Order Intercept Point 2 f1=1712.7 MHz at +15 dBm, f2=1850 MHz at +15 dBm, fmeas=1575.4 MHz IIP3_OB2 dBm - +50 -

700 MHz Harmonic2

Input jammer tone: 787.76 MHz at +15 dBm Measure the harmonic tone at 1575.52 MHz 2fo2 dBm - -30 - Out-of-Band Input Power 1 Db Compression 2 fjam=900 MHz, fmeas=1575 MHz at Pin=-40 dBm P-1dB(IN)_ OB1-2 dBm - +24 - fjam=1710 MHz, fmeas=1575 MHz at Pin=-40 dBm P-1dB(IN)_ OB2-2 dBm - +24 - Low Band Rejection 2 f=704~915 MHz, relative to 1575 MHz BR_L2 dBc - 85 - High Band Rejection 2 f=1710~1980 MHz, relative to 1575 MHz BR_H2 dBc - 75 - WLAN Band Rejection f=2400~2500 MHz, relative to 1575 MHz BR_W2 dBc - 72 - RF IN Return Loss (GPS)2 f=1575 MHz (GPS) RLiGPS2 dB - 7.5 - RF IN Return Loss (GLONASS)2 f=1597~1606 MHz (GLONASS) RLiGLN2 dB - 7.5 - RF IN Return Loss (BeiDou, Galileo)2 f=1559~1591 MHz (BeiDou, Galileo) RLiBG2 dB - 4.1 - RF OUT Return Loss(GPS)2 f=1575 MHz (GPS) RLoGPS2 dB - 10 - RF OUT Return Loss(GLONASS)2 f=1597~1606 MHz (GLONASS) RLoGLN2 dB - 13 - RF OUT Return Loss(BeiDou, Galileo)2 f=1559~1591 MHz (BeiDou, Galileo) RLoBG2 dB - 6.9 - Group Delay Time Deviation (GLONASS) 2 f=1597~1606 MHz (GLONASS) GDTGLN2 ns - 8.0 - Group Delay Time Deviation (BeiDou, Galileo) 2 f=1559~1591 MHz (BeiDou, Galileo) GDTBG2 ns - 36 -

TAI-SAW TECHNO LOGY CO., LTD. 6 G. FREQUENCY CHARACTERISTICS 1: (Conditions: V DD =2.8 V, V CTL =1.8 V, Ta=25 ° C, Z s=Z l=50 ohm, with application circuit.) Transfer function: S21 response (span: 250 MHz) S21 response

TAI-SAW TECHNO LOGY CO., LTD. 7 Group Delay

TAI-SAW TECHNO LOGY CO., LTD. 8 Reflection functions: S11 VSWR S22 VSWR

TAI-SAW TECHNO LOGY CO., LTD. 9 S11 Smith Chart S22 Smith Chart

TAI-SAW TECHNO LOGY CO., LTD. 10 S11 Return Loss S22 Return Loss

TAI-SAW TECHNO LOGY CO., LTD. 11 H. FREQUENCY CHARACTERISTICS 2: (Conditions: V DD =1.8 V, V CTL =1.8 V, Ta=25 ° C, Z s=Z l=50 ohm, with application circuit.) Transfer function: S21 response (span: 250 MHz) S21 response

TAI-SAW TECHNO LOGY CO., LTD. 12 Group Delay

TAI-SAW TECHNO LOGY CO., LTD. 13 Reflection functions: S11 VSWR S22 VSWR

TAI-SAW TECHNO LOGY CO., LTD. 14 S11 Smith Chart S22 Smith Chart

TAI-SAW TECHNO LOGY CO., LTD. 15 S11 Return Loss S22 Return Loss

TAI-SAW TECHNO LOGY CO., LTD. 16 I. MEASUREMENT CIRCUIT : Parts list Parts ID Manufacture L1 LQW15A Series (MURATA) C1 GRM03 Series (MURATA)

TAI-SAW TECHNO LOGY CO., LTD. 17 J. PACKAGE OUTLINE : SIDE VIEW TOP VIEW BOTTOM VIEW Unit: mm

TAI-SAW TECHNO LOGY CO., LTD. 18 K. PIN CONFIGURATION : No. SYMBOL DESCRIPTION 1 GND Ground terminal. This terminal should be connected to the ground plane as close as possible for excellent RF performance. 2 VCTL Control voltage terminal. 3 VDD Supply voltage terminal. Please connect bypass capacitor C1 with ground as close as possible. 4 NC(GND) Ground term inal. Please connect this terminal with ground plane as close as possible for excellent RF performance. 5 PreIN RF input terminal. This terminal connects to i nput of pre-SAW filter. 6 GND Ground terminal. This terminal should be connected to the ground plane as close as possible for excellent RF performance. 7 PreOUT Pre-SAW filter output terminal. This termin al connects to LNAIN with L1. 8 LNAIN RF input terminal. This terminal requires only a matching inductor L1, and does not require DC blocking capacitor because of integrated capacitor. 9 NC(GND) Ground terminal. This terminal should be connected to the ground plane as close as possible for excellent RF performance.

10 PostOUT

RF output terminal. This terminal requires no DC blocking capacitor since this terminal has integrated SAW that also works as DC blocking capacitor in nature. Exposed Pad GND Ground terminal. TRUTH TABLE “H”=V CTL (H), “L”=V CTL (L) VCTL Mode H Active mode L Stand-by mode

TAI-SAW TECHNO LOGY CO., LTD. 19 L. EVALUATION BOARD : <PCB LAYOUT GUIDELINE> PRECAUTIONS

• Please layout ground pattern under this FEM in order not to couple with RFIN and RFOUT terminal.
• All external parts should be placed as close as possible to the FEM.
• For good RF performance, all GND terminals must be connected to PCB ground plane of substrate, and via-holes for GND should be placed near the FEM. PCB Substrate: FR-4 Thickness: 0.2 mm Microstrip line width: 0.4 mm(Z0=50 Ω) Size: 14.0 mm x 14.0 mm

TAI-SAW TECHNO LOGY CO., LTD. 20 M. RECOMMENDED FOOTPRINT PATTERN : Metal MASK

TAI-SAW TECHNO LOGY CO., LTD. 21 N. PACKING SPECIFICATION :

TAI-SAW TECHNO LOGY CO., LTD. 22 O. RECOMMENDED REFLOW PROFILE : Cautions on using this product This product contains Gallium-Arsenide (GaAs) which is a harmful material.

• Do NOT eat or put into mouth.
• Do NOT dispose in fire or break up this product.
• Do NOT chemically make gas or powder with this pro duct.
• To waste this product, please obey the relating law of y our country. This product may be damaged with electric static di scharge (ESD) or spike voltage. Please handle with care to avoid these damages.