TMXW365 RAKON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

Issue: Rev 2, 9 January 2023 Specifications are subject to change without notice Copyright © 2005 to 2023 Rakon Limited. All rights reserved www.rakonxpress.com Table of Contents TMX W365 SAW Filter datasheet 2.5 x 2.0 mm, SMD

SAW Bandpass Filters | Wireless Communications Issue: Rev 2, 9 January 2023 Specifications are subject to change without notice Copyright © 2005 to 2023 Rakon Limited. All rights reserved Page 1 of 3 www.rakonxpress.com

Features

Parameter Min. Typ. Max. Unit Storage temperature range (Tstg) -25 85 °C Operating temperature range (TA) -40 85 °C Frequency and Electrical Characteristics (Reference temperature @ 25°C) Parameter Min. Typ.1 Max. Unit Source impedance (Single ended) 50 Ω Load impedance2 (balanced drive) 200 Ω Center frequency (fc) 2140 MHz Bandwidth @ -3dB (BW, passband width) 60.00 MHz Absolute Attenuation From 180 to 200 MHz From 200 to 1000 MHz From 1000 to 1880 MHz From 1880 to 1980 MHz From 1980 to 2050 MHz From 2050 to 2255 MHz From 2255 to 2300 MHz From 2300 to 2490 MHz From 2490 to 2550 MHz From 2550 to 3200 MHz From 3200 to 6000 MHz dB Insertion Loss (IL, 2110 – 2170 MHz) 3.1 4.1 dB Symmetry in band (referenced to the matched operating condition) Output amplitude balance: |S31 / S21|: 2110 – 2170 MHz -2.9 0 1.4 dB Output phase balance: (S31) – (S21)+180°: 2110 – 2170 MHz -10 0 15 ° Input VSWR (2110 – 2170 MHz) 1.7 2.4 Output VSWR (2110 – 2170 MHz) 1.8 2.4

1 Typical values are nominal performances at room temperature

² External matching network is required Features Applications 2.5 x 2.0 mm  2140 MHz center frequency  Ceramic package for Surface Mounted Technology  5O Ω Single Input / 200 Ω Balanced Configuration  60 MHz useable Passband  RF Filter for WCDMA Rx

SAW Bandpass Filters | Wireless Communications Issue: Rev 2, 9 January 2023 Specifications are subject to change without notice Copyright © 2005 to 2023 Rakon Limited. All rights reserved Page 2 of 3 www.rakonxpress.com Amplitude3 ripple within 2110 ~ 2170 MHz 0.9 1.8 dB Model Outline, Pin Connection and Marking Test Circuit

3 The amplitude variation is defined as the maximum level – minimum level over the given bandwidth

50 Ω / 200 Ω Configuration Pin Connections G Input C, D Output B, E Case Ground Marking Note Line 1 PC P = Product Code Identification C = Partner Identifier Line 2 YW Y = Last digit of the year W = Week Code (“A” to “Z” for Week 1 to 26 and “a” to “z” for the week 27 to 52) Line 3 • • = Identify black dot Unit: mm SAW Filter Input Single, 50 Ω B, E C G Output Balanced, 200 Ω D 18 nH 2.5±0.12 3.0±0.12 P C Y W A TOP VIEW 1.0 max FRONT VIEW BOTTOM VIEW A F E G 0.9 0.55 1.4 0.50 0.08 0.55 0.1 D B C R0.15 (x4) 0.75 SIDE VIEW

SAW Bandpass Filters | Wireless Communications Issue: Rev 2, 9 January 2023 Specifications are subject to change without notice Copyright © 2005 to 2023 Rakon Limited. All rights reserved Page 3 of 3 www.rakonxpress.com Frequency Characteristics FREQUENCY RESPONSE Packaging REEL DETAILS: Pb-Free label Label ESD prevention label Scanning orientation