TMXW333

TMXW333 RAKON | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 4

Technical content

Issue: Rev 4, 10 January 2023 Specifications are subject to change without notice Copyright © 2016 to 2023 Rakon Limited. All rights reserved www.rakonxpress.com Table of Contents TMX W333 SAW Filter datasheet 3.0 x 3.0 x 1.3 mm, SMD

SAW Bandpass Filters | Audio Issue: Rev 4, 10 January 2023 Specifications are subject to change without notice Copyright © 2016 to 2023 Rakon Limited. All rights reserved Page 1 of 3 www.rakonxpress.com

Features

Parameter Min. Typ. Max. Unit Storage temperature range (Tstg) -40 85 °C Operating temperature range (TA) -40 80 °C DC permissive voltage 10 V Maximum RF Power 10 dBm Frequency and electrical characteristics Parameter Min. Typ.1 Max. Unit Source impedance2 (Single ended) 50 Ω Load impedance2 (Single ended) 50 Ω Center frequency (fc) 864 MHz Bandwidth (BW, passband width) 3.00 MHz Absolute Attenuation From 300 MHz to 848 MHz From 848 MHz to 853.3 MHz From 878 MHz to 882 MHz From 882 MHz to 1200 MHz dB dB dB dB Insertion Loss (IL, 862.5 – 865.5 MHz) 2.5 3.4 Amplitude Ripple (862.5 – 865.5 MHz) 0.5 1.5 VSWR 2.2 Temperature Coefficient of Frequency -30.0 ppm/K

1 Typical values are nominal performances at room temperature

2 No external matching circuit is required

Features Applications 3.8 x 3.8 x 1.3 mm  864 MHz center frequency  Ceramic package for Surface Mounted Technology  Frequency Low Loss (typically 2.5dB) within PassBand Width 862.5 to 865.5 MHz  Maximum RF power: 10 dBm  No matching network required for operation at 50Ω  Audio

SAW Bandpass Filters | Audio Issue: Rev 4, 10 January 2023 Specifications are subject to change without notice Copyright © 2016 to 2023 Rakon Limited. All rights reserved Page 2 of 3 www.rakonxpress.com Model outline, pin connection and marking Test circuit Pin Connections

2 Input

1, 3 Output 1, 3, 4, 6 Ground Marking Note Line 1 W333 RakonXpress designation Line 2 S610 S = production Code 6 = Year 2016 10 =Week 10 Line 3 •AA

• = Identify black dot “AA" = internal production batch code, it corresponds to the wafer 50 Ω / 50 Ω Configuration Unit: mm SAW Filter Input Single, 50 Ω Output Single, 50 Ω GND 1, 3, 4, 6 BOTTOM VIEW 1.5 1.6 1.3 0.85 (x5) 0.6 (x6) RECOMMENDED PAD LAYOUT TOP VIEW 2.15 2.20 0.80 (x6) 1.70 FRONT VIEW 0.9±0.08 1.5 max TOP VIEW 3.0 ±0.1 SQ W333 S610

SAW Bandpass Filters | Audio Issue: Rev 4, 10 January 2023 Specifications are subject to change without notice Copyright © 2016 to 2023 Rakon Limited. All rights reserved Page 3 of 3 www.rakonxpress.com Frequency characteristics