TMXJT01 RAKON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

Issue: Rev 3, 5 December 2022 Specifications are subject to change without notice Copyright © 2018 to 2022 Rakon Limited. All rights reserved www.rakonxpress.com Table of Contents TMX JT01 SAW Filter datasheet 5.0 x 5.0 x 1.35 mm, SMD

SAW Bandpass Filters | Wireless Communications Issue: Rev 3, 22 December 2022 Specifications are subject to change without notice Copyright © 2018 to 2022 Rakon Limited. All rights reserved Page 1 of 4 www.rakonxpress.com

Features

Parameter Min. Typ. Max. Unit Storage temperature range (Tstg) -40 85 °C Operating temperature range (TA) -10 65 °C DC voltage (VDC) 10 V RF Power (in Bandwidth) 10 dBm Frequency and Electrical Characteristics (Reference temperature @ 25°C) Parameter Min. Typ.1 Max. Unit Center frequency (fC) 433.92 MHz Insertion Loss (IL, fc ± 2 MHz) 2.2 4.2 MHz Bandwidth (BW @ 3 dB, passband width) 2.00 dB Amplitude ripple (pk-pk, fc ± 2 MHz) 1.5 dB Absolute Attenuation From DC to (fc - 20.0) MHz From (fc + 25.0) to (fc + 100.0) MHz dB

1 Typical values are nominal performances at room temperature

Features Applications 5.0 x 5.0 x 1.35 mm  433.92 MHz center frequency  Ceramic package for Surface Mounted Technology  Typical Passband Width: 2 MHz  Low loss RF Filter and low amplitude ripple  No matching network required for operation at 50 Ω  Remote control - RF  Wireless applications: o Home appliances o Security systems

SAW Bandpass Filters | Wireless Communications Issue: Rev 3, 22 December 2022 Specifications are subject to change without notice Copyright © 2018 to 2022 Rakon Limited. All rights reserved Page 2 of 4 www.rakonxpress.com Model Outline, Pin Connection and Marking Test Circuit Pin Connections

1 Input / Output ground

2 Input/ Output

5 Output / Input ground

6 Output / Input

3, 7 To be grounded 4, 8 Case ground Code Dimensions (mm) A 2.08 B 0.60 C 1.27 D 2.54 E 1.20 F 1.35 G 5.00 H 5.00 Marking Note Line 1 JT01 Reference to RakonXpress part number with only the last 4 digits Line 2 S803 S = Production Code 8 = Year 2085 03 = Week 03 Line 3 • AA • = Identify black dot AA = Internal Code (Wafer Batch) Unit: mm Input DUT From 50Ω source GND GND Output To 50Ω load OPTION A Output DUT From 50Ω source GND GND Input To 50Ω load OPTION B

SAW Bandpass Filters | Wireless Communications Issue: Rev 3, 22 December 2022 Specifications are subject to change without notice Copyright © 2018 to 2022 Rakon Limited. All rights reserved Page 3 of 4 www.rakonxpress.com Frequency Characteristics TYPICAL FREQUENCY RESPONSE

SAW Bandpass Filters | Wireless Communications Issue: Rev 3, 22 December 2022 Specifications are subject to change without notice Copyright © 2018 to 2022 Rakon Limited. All rights reserved Page 4 of 4 www.rakonxpress.com Recommended Reflow Soldering Profile NOTE:

  • The components shall remain within the electrical specifications after it soldered on the 1mm thickness PCB board and dipped in the solder at 260 ± 5°C during 10 ± 1 seconds.
  • The components shall remain within the electrical specifications after it soldered by electric iron, solder at 350 ± 10 °C during 3~4 seconds. Recovery time: 2 ± 0.5 hour.
  • Ultrasonic cleaning may cause deterioration and destruction of the component. Please avoid ultrasonic cleaning.
  • Only leads of components may be soldered. Please avoid soldering another part of the component.