TMXFT01 RAKON | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
Issue: Rev 2, 1 December 2022 Specifications are subject to change without notice Copyright © 2012 to 2022 Rakon Limited. All rights reserved www.rakonxpress.com Table of Contents TMX FT01 SAW Filter datasheet 5.0 x 5.0 x 1.5 mm, SMD
SAW Bandpass Filters | Wireless Communications Issue: Rev 2, 1 December 2022 Specifications are subject to change without notice Copyright © 2012 to 2022 Rakon Limited. All rights reserved Page 1 of 3 www.rakonxpress.com
Features
Parameter Min. Typ. Max. Unit Storage temperature range (Tstg) -10 70 °C Operating temperature range (TA) -40 85 °C DC voltage (VDC) 3 V Input Power Level 10 dBm Frequency and Electrical Characteristics (Reference temperature @ 25°C) Parameter Min. Typ.1 Max. Unit Center frequency (fc) 169 MHz Insertion loss (IL) at ILmin2 1.5 2.8 dB Bandwidth (BW @ -3dB, passband width) 6.00 8.80 dB Relative Attenuation (Relative to ILmin) From 119 to 139 MHz From 139 to 154 MHz From 199 to 219 MHz dB Source impedance3 (Single ended) 50 Ω Load impedance3 (Single ended) 50 Ω
1 Typical values are nominal performances at room temperature
2 ILmin is the minimum of the pass band attenuation. The center frequency Fc is the mean value of the upper and lower frequencies at the 3dB filter attenuation level relative to the ILmin.
3 No external matching circuit is required
Features Applications 5.0 x 5.0 x 1.5 mm 169 MHz center frequency Ceramic Package for Surface Mounted Technology RF SAW Filter Wireless M-Bus Wireless applications: o Smart Building o Smart Industry
SAW Bandpass Filters | Wireless Communications Issue: Rev 2, 1 December 2022 Specifications are subject to change without notice Copyright © 2012 to 2022 Rakon Limited. All rights reserved Page 2 of 3 www.rakonxpress.com Model Outline, Pin Connection and Marking Test Circuit Pin Connections
2 Input
6 Output
1, 3, 4, 5, 7, 8 Ground Marking Note Line 1 FT01 Reference to RakonXpress part number with only the last 4 digits Line 2 T227AA T = Partner identifier 2 = Last digit of the year 27 = Number of week in the year AA = Lot number in the week (from AA to ZZ) Line 3 • • = Identify black dot Unit: mm SAW Filter Input Single, 50 Ω Output Single, 50 Ω GND 1, 3, 4, 5, 7, 8 RECOMMENDED PAD LAYOUT (TOP VIEW) BOTTOM VIEW FRONT VIEW TOP VIEW 0.64 (x8) 1.17 (x7) 2.08 2.54±0.15 5.2 0.71 0.43 0.84 (x8) 1.47 (x7) 2.28 SIDE VIEW FT01 T227AA 5.0±0.2 SQ 1.7 max 50 Ω / 50 Ω Configuration
SAW Bandpass Filters | Wireless Communications Issue: Rev 2, 1 December 2022 Specifications are subject to change without notice Copyright © 2012 to 2022 Rakon Limited. All rights reserved Page 3 of 3 www.rakonxpress.com Frequency Characteristics