WATERQUALITY CAMPBELL | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Products for Stand-alone Water Quality Monitoring and Control Campbell Scientific builds systems for unattended, long-term monitor- ing of water quality in many natural and industrial environments, in- cluding streams, watersheds, wells, caves, water/wastewater treatment plants, aquaculture operations, landfills, and processing plants. Our systems include Campbell dataloggers, and a huge variety of sensors and communication peripherals, customized for each application. www.campbellsci.eu/water-quality More info: +44(0) 1509 828 888 RELIABLE Measurements Datalogger Power Communications Description TMS120/TMS185 Turbidity Monitoring Stations turbidity CR200X
12 Vdc recharge-
measure sediment in water- ways. They can be used in remote locations with no access to AC power. OBS-3A Turbidity and Temperature Monitoring System turbidity, tem- perature, pressure, conductivity Inte- grated Three D-cell batteries Laptop Combines our OBS® probe with pressure, temperature, and conductivity sensors in a battery- powered recording instrument. MAJOR SYSTEMS Custom Systems Most of the systems we sell are customized. Tell us what you need and we’ll help you configure a system that meets your exact needs. Dataloggers used in Water Quality Monitoring Our dataloggers feature wide operating temperature ranges, low power consumption, and the ability to directly interface with a large variety of sensors. Because our dataloggers operate on bat- teries (with or without solar panels), they are ideal for long-term, stand-alone operation, such as at remote streams or wells. Most of our dataloggers are expandable using multiplexers and other pe- ripherals. Data are typically displayed and stored in the desired units of measure (e.g., specific conductance as mS/m, µS/cm, Ohms). Powerful on-board instruction sets allow unattended control decisions based on time or conditional events. For example, if measured water quality levels are outside a predetermined range, the datalogger can actuate water samplers, sound alarms, open valves, actuate injectors, and make a phone call to report conditions. The dataloggers can easily provide the necessary water sampler control to meet EPA-mandated first-flush and follow-up sample schedules. All data is time-stamped and data from event-triggered samples is marked for later analysis.
80 Hathern Road, Shepshed, LE12 9GX UK | +(0)1509 828888 | sales@campbellsci.co.uk | www. campb ellsci. eu UK | AUSTRALIA | BRAZIL | CANADA | CHINA | COSTA RICA | FRANCE | GERMANY | SE ASIA | SOUTH AFRICA | SPAIN | USA © 2000, 2017 Campbell Scientific December 13, 2017 Water Quality Applications Lakes/Reservoirs Streams/Rivers Groundwater Watersheds Caves Aquaculture/Fisheries Wells Effluent Landfills Tailings ponds Processing plants Water/wastewater plants Water Quality Measurements Turbidity Dissolved oxygen Conductivity Temperature pH ORP Chloride Bromide Nitrate Salinity Ammonia Water Quality Case Studies Our systems have helped a variety of organizations reach their goals. The following are just a few of these: Campbell Scientific’s CR850 dataloggers are at the core of mea- surement stations that monitor water quality in coal-mine runoff at the West Coast of New Zealand. Automatic lime dosing raises the pH of the Mangatini stream to ecologically viable conditions. www.campbellsci.com/new-zealand-mine A Campbell automated monitoring and control system maintains optimal dissolved-oxygen levels on Lee’s multiple-pond catfish farm in Macon, Mississippi. Our equipment eliminated the need to manually check dissolved-oxygen concentrations several times a night. Alarms are sent via RF to a computer. www.campbellsci.com/macon-mississippi Campbell gear is used to monitor the cleanup of the Susie Mine near Rimini, Montana. Our CR1000 datalogger acquires and stores data from multiple sensors and transmits the data to a stationary ground unit, from where it is sent to an Internet site. The sensors measure temperature, pH, dissolved oxygen, and water flow. www.campbellsci.com/susie-mine For the New Zealand coal-mine, our equipment monitors turbidity, water temperature, pH, water level, general weather, and present weather. OBS300 Turbidity Probe Sensors for Water Quality Measurements Almost any water quality sensor, individual or multi- parameter, may be used with the system, allowing the system to be customized for each application. We helped create the original SDI-12 standard, so you can be sure our systems are SDI-12 compat-ible. In addition, nearly all available flow, level, and meteorological sensors can be measured, generally without external signal conditioning. Communications The availability of multiple telecommunications and on-site options for retrieving data also allows systems to be customized to meet exact needs. Options include: voice-synthesized phone, telephone, cellphone, satellite, radio, Ethernet, short haul, meteor burst, coaxial cable, and storage module. Protocols supported include SCADA, DNP3, and Modbus. Systems can be programmed to send alarms or report site condi- tions by calling out to computers, phones, radios, or pagers. Real- time or historical data can be displayed or processed with Campbell Scientific software. Data can also be exported as ASCII files for fur-ther processing by spreadsheets, databases, or analysis programs. CS511 Dissolved Oxygen Sensor