TMPIT05030F TRANSKO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

Rev 1: 09 -04 -2018 Power Inductor SMD (5.4 X 6.0 X 3.0 mm)

  • Iron Powder Molding • Low DCR
  • Shielded Construction • Low acoustic noise
  • Halogen Free RoHS compliant

FEATURES

TMPIT05030F -100M 10±20% 128 (110) 3.5 2.75 TMPIT05030F -150M 15±20% 190 (165) 2.6 2.1 TMPIT05030F -220M 22±20% 250 (220) 1.7 1.9 TMPIT05030F -330M 33±20% 440 (380) 1.6 1.6 DC Resistance (mΩ) Rated DC Current (A) Typ. Part No. Inductance (µH) Max. (Typ.)

  • Measurement frequency of Inductance value : 100KHz, 1V DIMENSION SOLDER PATTERN SCHEMATIC A B C D E G H I mm XXX

Rev 1: 09 -04 -2018 TMPIT05030F -R22M TMPIT05030F -R33M TMPIT05030F -1R5M TMPIT05030F -1R0M TMPIT05030F -R68M TMPIT05030F -R47M

Rev 1: 09 -04 -2018 TMPIT05030F -2R2M TMPIT05030F -3R3M TMPIT05030F -100M TMPIT05030F -6R8M TMPIT05030F -5R6M TMPIT05030F -4R7M

Rev 1: 09 -04 -2018 TMPIT05030F -150M TMPIT05030F -220M TMPIT05030F -330M

Rev 1: 09 -04 -2018 1.Operating temperature range -55 TO + 125°C (Includes temperature when the coil is heated) 2. External appearance On visual inspection, the coil has no external defects. 3. Terminal strength After soldering. Between copper plate and terminals of coil. Push in two directions of X.Y withstanding at below conditions. Terminal should not peel off. (refer to figure at right) 5.0N 60 sec. 4. Insulating resistance Over 100MΩ at 100V D.C. between coil and core. 5. Dielectric strength No dielectric breakdown at 100V D.C. for 1 minute between coil and core. 6. Temperature characteristics Inductance coefficient (0~2,000)x10 -6 /°C ( -25~+80°C) inductance deviation within ±5.0%, after 96 hours 7. Humidity characteristics (Moisture Resistance) Inductance deviation within ±5%, after 96 hours in 90~95% relative humidity at 40 ±2°C and 1 hour drying under normal condition. 8. Vibration resistance Inductance deviation within ±5%, after vibration for 1 hour. In each of three orientations at sweep vibration (10~55~10 Hz) with 1.5mm P -P amplitudes. 9. Shock resistance Inductance deviation within ±5%, after being dropped once with 981m/s 2 (100G) shock attitude upon a rubber block method shock testing machine, in three different orientations. 10. Resistance to Soldering Heat: 260°C, 10 seconds (See recommend reflow) 11. Storage environment Temperature: 0°C~35°C; -55°C ~ 125°C (after PCB) Humidity Range: 50% ~ 70% RH 12. Use components within 12 months. If 12 months or more have elapsed, check solderability before use. LEAD -FREE HEAT ENDURANCE TEST LEAD -FREE RECOMMENDED REFLOW RELIABILITY TEST Transko Electronics, Inc reserves the right to make changes to the product (s), service (s), and specification (s) described herein without notice. See “Terms of Sale” for details on our website.