TMPIC07030F TRANSKO | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
Rev 2: 04 -15 -2019
- Alloy Powder Molding • Low DCR
- Magnetic shielded • Low acoustic noise
- Halogen Free RoHS compliant
FEATURES
Power Inductor SMD (6.8 X 7.3 X 3.0mm) TMPIC07030F -100M 10 ±20% 67.0 (62.0) 5.5 4.8 TMPIC07030F -220M 22 ±20% 200 (180) 3.0 2.9 DC Resistance (mΩ) Rated DC Current (A) Typ. Part No. Inductance (µH) Tolerance (%) Max. (Typ.)
- Measurement frequency of Inductance value : at 100KHz, 1V
- Test equipment: CH1062A / CH1320 DIMENSION SOLDER PATTERN SCHEMATIC A B C D E G H I mm XXX XXXX SPECIFICATION
Rev 2: 04 -15 -2019 REEL DIMENSIONS (1500 pcs per reel) W D C T1 N T2 E A0 B0 K0 t
Rev 2: 04 -15 -2019 RELIABILITY TEST 1.Operating temperature range -55 TO + 125°C (Includes temperature when the coil is heated) 2. External appearance On visual inspection, the coil has no external defects. 3. Terminal strength After soldering. Between copper plate and terminals of coil. Push in two directions of X.Y withstanding at below conditions. Terminal should not peel off. (refer to figure at right) 5.0N 60 sec. 4. Insulating resistance Over 100MΩ at 100V D.C. between coil and core. 5. Dielectric strength No dielectric breakdown at 100V D.C. for 1 minute between coil and core. 6. Temperature characteristics Inductance coefficient (0~2,000)x10 -6 /°C ( -25~+80°C) inductance deviation within ±5.0%, after 96 hours 7. Humidity characteristics (Moisture Resistance) Inductance deviation within ±5%, after 96 hours in 90~95% relative humidity at 40 ±2°C and 1 hour drying under normal condition. 8. Vibration resistance Inductance deviation within ±5%, after vibration for 1 hour. In each of three orientations at sweep vibration (10~55~10 Hz) with 1.5mm P -P amplitudes. 9. Shock resistance Inductance deviation within ±5%, after being dropped once with 981m/s 2 (100G) shock attitude upon a rubber block method shock testing machine, in three different orientations. 10. Resistance to Soldering Heat: 260°C, 10 seconds (See recommend reflow) 11. Storage environment Temperature: 0°C~35°C; -55°C~125°C (after mounting on PCB) Humidity Range: 50% ~ 70% RH 12. Use components within 12 months. If 12 months or more have elapsed, check solderability before use. Transko Electronics, Inc reserves the right to make changes to the product (s), service (s), and specification (s) described herein without notice. See “Terms of Sale” for details on our website. LEAD -FREE HEAT ENDURANCE TEST LEAD -FREE RECOMMENDED REFLOW