TMPG06-27 RECTRON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
FEATURES
- Designed for the hood applications * Available in uni-directional only * Glass passivated chip construction * Excellent clamping capability * Low incremental surge resistance * Fast response time: typically less than 1.0ps from 0 Volts to V(BR) * For devices with V(BR)>=10V, ID are typically less than 1.0uA MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. TMPG06-27 R-1 300 WATT PEAK POWER 1.0 WATT STEADY STATE TRANSIENT VOLTAGE SUPPRESSOR Dimensions in inches and (millimeters) MAXIMUM RA TINGS (At TA = 25 o C unless otherwise noted) Electrical characteristics apply in uni-directional only 2002-4 Ratings at 25 o C ambient temperature unless otherwise specified. 3. Lead temperature at TL = 75 o C NOTES : 1. Non-repetitive current pulse, per Fig.3 and derated above TA = 25 o C per Fig.2. 4. Measured on 8.3mS single half sine-wave or equivalent square wave, duty cycle = 4 pules per minute maximum. 5. Peak pulse power waveform is 10/1000uS. RATINGS Steady State Power Dissipation (Note 2) Peak Pulse Current with a 10/1000uS waveform ( Note 1, 2, Fig.3 ) Maximum Instantaneous Forward Voltage at 25A (Note 4) SYMBOL IFSM V F TJ, TSTG Volts -55 to + 150 0 C UNITS Amps Peak Power Dissipation with a 10/1000uS (Note 1, Fig.1) 300 3.5 VALUE Operating and Storage Temperature Range P PPM Watts IPPM AmpsSEE TABLE 1 Peak Forward Surge Current per Fig.5 (Note 2,4) P M (AV ) 1.0 Watts MECHANICAL DATA * Case: Molded plastic black body * Epoxy: Device hasUL flammability classification 94V-O * Lead: MIL-STD-202E method 208C guaranteed * Mounting position: Any * Weight: 0.19 gram .787 (20.0) MIN. .106 (2.7) .126 (3.2) .787 (20.0) MIN. .102 (2.6) .091 (2.3) DIA. .025 (0.65) .021 (0.55) DIA.
RATING AND CHARACTERISTIC CURVES ( TMPG06-27 ) FIG. 2 - PULSE DERATING CURVE PEAK PULSE POWER (P PP ) OR CURRENT TA, AMBIENT TEMPERATURE,( ¢J) 02 5 5 0 75 100 125 150 175 200 1.00 .75 .50 .25 (IPP ) DERATING IN PERCENTAGE,% Measured at Zero Bias Measured at Stand off Voltage,V WM f = 1.0 MHz Vsig = 50mVp-p T J = 25¢J FIG. 4 - TYPICAL JUNCTION CAPACITANCE C J, CAPACITANCE, pF V(BR ), BREAKDOWN VOLTACE, VOLTS 1.0 10 100 200 10000 1000 100 Pulse Width (td) is Defined as the Point Where the Peak Current Decays to 50% of I PPM 10/1000usec. Waveform as Defined by R.E.A. Peak Value I PPM tr = 10usec. FIG. 3 - PULSE WAVEFORM IPPM , PEAK PULSE CURRENT,% t, TIME,mS 1.0 2.0 3.0 4.0 100 150 HALF VALUE - IPPM td FIG. 1 - PEAK PULSE POWER RATING CURVE PPPM , PEAK PULSE POWER, kW TP, PULSE WIDTH, sec Non-Repetitive Pulse Waveform Shown in Fig.3 T A = 25¢J 100 1.0 0.1 0.1uS 1.0uS 10uS 100uS 1.0mS 10mS IFSM , PEAK FORWARD SURGE FIG. 5 - MAXIMUM NON-REPETITIVE FORWARD NUMBER OF CYCLES AT 60 Hz 10 100 8.3ms Single Half Sine-Wave (JEDED Method) T J = TJ max. SURGE CURRENT UNIDIRECTIONAL CURRENT AMPERES
TRANSIENT VOLTAGE SUPPRESSORS 300W SERIES TVS DIODES / R-1 300W (TABLE 1) TYPE Breakdown Voltage VBR (Volts) MIN. MAX. @I T (mA ) Reverse Stand off Voltage VWM (Volts) Maximum Reverse Leakage at VWM ID (uA) Maximum Peak Pulse Current IPPM (Amps ) Maximum Clamping Voltage at IPPM VC (Volts)