TMPG06-43A VISHAY | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 5
Technical content
Vishay General Semiconductor TMPG06-6.8 thru TMPG06-43A Document Number 88404 13-Dec-06 www.vishay.com Automotive Transient Voltage Suppressors High Temperature Stability & High Reliability Conditions
FEATURES
- Patented PAR ® construction Available in Unidirectional polarity only 400 W peak pulse power capability with a 10/1000 µs waveform, repet itive rate (duty cycle): 0.01 % Excellent clamping capability Very fast response time Low incremental surge resistance Typical I D less than 1.0 µA above 10 V rating Solder Dip 260 °C, 40 seconds Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive and telecommunication. MECHANICAL DATA Case: MPG06, molded epoxy over passivated junction Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002B and JESD22-B102D HE3 suffix for high re liability grade (AEC Q101 qualified) Polarity: Color band denotes cathode end Patented* * Patent #'s 4,980,315 5,166,769 278 094 Case Style MPG06 MAJOR RATINGS AND CHARACTERISTICS V(BR) 6.8 V to 43 V PPPM 400 W PD 1.0 W IFSM 40 A Tj max. 185 °C Note: (1) Non-repetitive current pulse, per Fig. 3 and derated above TA = 25 °C per Fig. 2 (2) Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL LIMIT UNIT Peak power dissipation with a 10/1000 µs waveform (1) (Fig. 1) P PPM Minimum 400 W Peak pulse current with a 10/1000 µs waveform (1,2) (Fig. 3) I PPM see next table A Power dissipation on infinite heatsink at TL = 75 °C (Fig. 5) P D 1.0 W Peak forward surge current 8.3 ms single half sine-wave (2) I FSM 40 A Maximum instantaneous forward voltage at 25 A (2) V F 3.5 V Operating junction and storage temperature range T J, TSTG - 65 to + 185 °C
www.vishay.com Document Number 88404 13-Dec-06 Vishay General Semiconductor TMPG06-6.8 thru TMPG06-43A Note: (1) Pulse test: tp ≤ 50 ms (2) Surge current waveform per Fig. 3 and derated per Fig. 2 (3) All terms and symbols are consistent with ANSI/IEEE C62.35 ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) DEVICE TYPE MAXIMUM BREAKDOWN VOLTAGE V(BR) (1) AT IT (V) TEST CURRENT IT (mA) STAND- OFF VOLTAGE VWM (V) MAXIMUM REVERSE LEAKAGE AT VWM ID (µA) REVERSE LEAKAGE AT VWM TJ = 150 °C ID (µA) PEAK PULSE CURRENT IPPM (2) (A) MAXIMUM CLAMPING VOLTAGE AT LPPM VC (Volts) MAXIMUM TEMP. COEFFICIENT OF V(BR) (%/°C) MIN MAX
Document Number: 91000 www.vishay.com Revision: 08-Apr-05 1 Notice Specifications of the products displayed herein are subjec t to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale.