TMCD6P0040C

TMCGD6SP0040C CK-COMPONENTS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

J–11 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com TM Series Miniature Snap-acting Switches Features/Benefits

• Broad range of operating forces available
• Wide variety of actuator and terminal styles
• Cost-effective solution Typical Applications
• Pumps and motors
• White goods
• Consumer appliances Specifications CONTACT RATING: From low level* to 15 AMPS @ 250 V AC. ELECTRICAL LIFE: 150,000 cycles at 15 AMPS @ 250 V AC, models with 150 grams operating force. 350,000 cycles at 10 AMPS @ 250 V AC, models with 75 grams operating force. INSULATION RESISTANCE: 1,000 M οηµ min. DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level. OPERATING TEMPERATURE: –67ºF to 302ºF (–55ºC to 150ºC). OPERATING FORCE: 50, 75 and 150 grams at actuator available; refer to chart for lever style forces. MOUNTING: Torque screws 2-5 in/lbs. * Low Level=conditions where no arcing occurs during switching, i.e., 0.4 VA max. @ 20 V AC or DC max. Materials SWITCH HOUSING: Thermoplastic or general purpose phenolic (UL 94V-0). ACTUATOR BUTTON: Thermoplastic (UL 94V-0). SPRING: Copper alloy. PIVOT: Brass alloy. MOVABLE CONTACTS: Gold alloy for ratings 1 AMP @ 125 V AC or less. Fine silver for ratings greater than 1 AMP @ 125 V AC. STATIONARY CONTACTS: Gold alloy for ratings 1 AMP or less. Fine silver for ratings greater than 1 AMP . TERMINALS: Brass alloy for ratings up to 10 AMPS @ 250 V AC. Copper alloy for 15 AMPS @ 250 V AC ratings. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages J-12 through J-16. For additional options not shown in catalog, consult Customer Service Center. Available extended electrical life per UL 1054, rated for 100,000 operations, consult factory. Series TM SP, Mom. Operating Force CG 2.65 oz./75 grams CJ 5.29 oz.,/150 grams CF 1.76 oz./50 grams Electrical Rating D6 1O A @ 125 & 250 V AC; 1/3 HP @ 125 & 25O V AC;1/2 A @ 125 V DC; 1/4 A @ 250 V DC G6 15 A @ 125 & 250 V AC; 1/4 A @ 250 V DC; 1/2 A @ 125 V DC; 1/2 HP @ 125 & 250 V AC;

3 A @ 125 V AC “L”

F5 1 A @ 125 V AC; 1 A @ 30 V DC H3 5 A @ 250 V AC; 1/6 HP @ 125 & 25O V AC Actuator P00 Pin plunger A10 .81" lever roller, high force A15 1.34" lever roller, high force A20 1.02" lever roller, low force A25 1.56" lever roller, low force T10 .84" lever, high force T13 1.34" simulated roller, high force T14 1.29" simulated roller, high force T15 1.40" lever, high force T16 2.34" lever, high force T17 2.00" lever, high force T18 2.75" lever, high force T20 1.06" lever, low force T23 1.56" simulated roller, low force T24 1.50" simulated roller, low force T25 1.62" lever, low force T26 2.56" lever, low force T27 2.22" lever, low force T28 2.97" lever, low force Terminations 40 .187" quick connect

10 Solder

4A .250" quick connect

60 Screw

W SPST N.C. Y SPST N.O. Mounting Style S Standard V Metric T M * All models

J–12 Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ck-components.com TM Series Miniature Snap-acting Switches SERIES OPERATING FORCE ELECTRICAL RATING TM MINIATURE SNAP-ACTING SWITCHES – SP MOMENTARY * All models Contact Customer Service Center for availability and delivery of nonstandard ratings. * Low Level=conditions where no arcing occurs during switching, i.e., 0.4 VA max. @ 20 V AC or DC max. 1.76 50CF 5.29 150CJ 2.65 75CG BASIC SWITCH OPERATING FORCE (OZ./GRAMS)OPTION CODE Operating Force option ‘CF’ not available with ‘T18, T27 and T28’ actuator options. Operating force varies with actuator option, see ACTUATOR option section. OPTION CODE RoHS COMPLIANT * RoHS COMPATIBLE * MOVABLE CONTACT STATIONARY CONTACT ELECTRICAL RATING D6 Yes Yes Fine Silver Fine Silver 10 AMPS @ 125 & 250 V AC; 1/3 HP @ 125 & 250 V AC; 1/2 AMP @ 125 V DC; 1/4 AMP @ 250 V DC. F5 Yes Yes Gold alloy Gold alloy From low level* to 1 AMP @ 125 V AC, 1 AMP @ 30 V DC. G6 Yes Yes 15 AMPS @ 125 & 250 V AC; 0.25 AMP @ 250 V DC; 0.5 AMP @ 125 V DC; 1/2 HP @ 125 & 250 V AC; 3 AMPS @ 125 V AC “L”. H3 Yes Yes 5 AMPS @ 250 V AC; 1/6 HP @ 125 & 250 V AC. CONTACT MATERIAL Fine SilverFine Silver * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.

Miniature Snap-acting Switches ELECTRICAL RATING MOUNTING STYLE V MetricS Standard

• AVAILABLE x NOT AVAILABLE
• ••H3 xx •G6
• ••F5
• ••D6 MAXIMUM OPERATING FORCE (OZ./GRAMS) 1.76/50 2.65/75 5.29/150 CF CG CJ ELECTRICAL RATING AVAILABLE COMBINATIONS * All models Contact Customer Service Center for availability and delivery of nonstandar d ratings. * Low Level=conditions where no arcing occurs during switching, i.e., 0.4 VA max. @ 20 V AC or DC max. Recommended maximum screw size: 4-40. NOTE: Torque mounting screws 2-5 in/lbs. Recommended maximum screw size: 3 mm. J–13 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com

Miniature Snap-acting Switches ACTUATOR FIG. 3 A B C Lever FIG. 4 A B C D Simulated Roller —.600 ± .080 (15,24 ± 2,03) .58 (14,7) 1.62 (41,1)3T25 .25 dia. (6,4Ø) .740 ± .090 (18,80 ± 2,29) .58 (14,7) 1.50 (38,1)4T24 .19 dia. (4,8Ø) .810 ± .065 (20,57 ± 1,65) .58 (14,7) 1.56 (39,6)4T23 —.600 ± .045 (15,24 ± 1,14) .58 (14,7) 1.06 (26,9)3T20 —.600 ± .093 (15,24 ± 2,36) .36 (9,1) 2.75 (69,9)3T18 —.600 ± .052 (15,24 ± 1,57) .36 (9,1) 2.00 (50,8)3T17 —.600 ± .062 (15,24 ± 1,57) .36 (9,1) 2.34 (59,4)3T16 —.600 ± .040 (15,24 ± 1,02) .36 (9,1) 1.40 (35,6)3T15 .25 dia. (6,4Ø) .740 ± .050 (18,8 ± 1,3) .36 (9,1) 1.29 (32,8)4T14 .19 dia. (4,8Ø) .810 ± .040 (20,57 ± 1,02) .36 (9,1) 1.34 (34,0)4T13 —.600 ± .020 (15,24 ± 0,51) .36 (9,1) .84 (21,3)3T10 2.56 (65,0)T26 HIGH FORCE, LOW MOTION PIVOT POSITION LOW FORCE, HIGH MOTION PIVOT POSITION NOTE: Lever actuator options are available in either of two pivot positions. Levers located in the forward pivot position have lower forces and higher motions. Levers located in the rear pivot position have higher forces and lower motions. Available with actuators A10, A15, T10, T13, T14, T15, T16, T17 and T18. Available with actuators A20, A25, T20, T23, T24, T25, T26, T27 and T28. FIG. 1 A B C D Lever Roller FIG. 2 A C Pin Roller .19 dia. (4,8Ø) .810 ± .080 (20,57 ± 2,03) .58 (14,7) 1.56 (39,6)1A25 .19 dia. (4,8Ø) .810 ± .050 (20,57 ± 1,27) .58 (14,7) 1.03 (26,2)1A20 .19 dia. (4,8Ø) .810 ± .040 (20,57 ± 1,02) .36 (9,1) 1.34 (34,0)1A15 .19 dia. (4,8Ø) .810 ± .020 (20,57 ± 0,51) .36 (9,1) .81 (20,6)1A10 —.578 ± .015 (14,68 ± 0,38)—.80 (20,3)2P00 3 .56 (14,7) — .600±.125 (15,24±3.18) 2.22 (56,4)T27 3 .58 (14,7) — .600±.125 (15,24±3.18) 2.97 (75,4)T28 3 .58 (14,7) — .600±.187 (15,24±4.75) J–14 Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ck-components.com

J–15 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com TM Series Miniature Snap-acting Switches ACTUATOR NOTE: For basic switch operating forces, see page J-12. .280 (7,11) .750 (19,05) .187 (4,75)N/A .04 .07 1 2N/A .07 .14 2 4 .200 (5,08) .500 (12,70) .125 (3,18)N/A .04 .11 13N/A .11 .21 .60 .88 17 25 .035 (0,89) .056 (1,42) .013 (0,33) .35 .53 1.06 10 15 30 .71 .99 2.12 20 28 60 1.76 2.65 5.29 50 75 150 P00 .125 (3,18) .312 (7,92) .070 (1,78) .04 .07 .18 125 .11 .18 .35 35 1 0 .53 1.06 1.59 15 30 45A25 .060 (1,52) .140 (3,56) .025 (0,64) .11 .18 .35 35 1 0 .25 .35 .71 7 10 20 1.06 1.76 3.17 30 50 90A20 .065 (1,65) .160 (4,06) .030 (0,76) .11 .14 .35 34 1 0 .21 .35 .71 6 10 20 1.06 1.59 2.82 30 45 80A15 .035 (0,89) .070 (1,78) .013 (0,33) .25 .53 1.06 7 15 30 .49 .99 1.69 14 28 48 2.12 3.17 6.35 60 90 180A10 N/A .42 .63 12 18T28 N/AT27 .100 (2,54) .330 (8,38) .070 (1,78) .04 .07 .16 1 2 4.5 .07 .14 .32 249 .71 1.06 1.41 20 30 40T25 .110 (2,79) .312 (7,92) .080 (2,03) .05 .07 .18 1.5 25 .11 .18 .35 3 51 0 .53 1.23 1.76 15 35 50T24 .125 (3,18) .312 (7,92) .070 (1,78) .04 .07 .18 125 .11 .18 .35 35 1 0 .53 1.06 1.59 15 30 45T23 .065 (1,65) .160 (4,06) .030 (0,76) .11 .18 .35 3 51 0 .21 .32 .71 6 92 0 1.06 1.59 3.17 30 45 90T20 .160 (4,06) .375 (9,52) .078 (1,98)N/A .04 .14 14N/A .14 .28 48N/A .71 1.23 20 35T18 .110 (2,79) .220 (5,59) .062 (1,57) .07 .07 .21 2 26 .14 .21 .42 4 61 2 .71 .88 1.76 20 25 50T17 .140 (3,56) .312 (7,92) .090 (2,29) .05 .07 .18 1.5 2 5 .11 .18 .35 35 1 0 .53 .71 1.41 15 20 40T16 .075 (1,90) .160 (4,06) .032 (0,81) .11 .14 .35 34 1 0 .21 .32 .71 69 2 0 1.06 1.59 2.28 30 45 80T15 .062 (1,57) .140 (3,56) .050 (1,27) .11 .14 .35 3 41 0 .25 .35 .71 7 10 20 1.06 1.76 3.17 30 50 90T13 .065 (1,65) .160 (4,06) .030 (0,76) .11 .14 .35 34 1 0 .21 .35 .71 6 10 20 1.06 1.59 2.82 30 45 80T13 .035 (0,89) .080 (2,03) .013 (0,33) .25 .53 1.06 7 15 30 .49 .99 1.69 14 28 48 2.12 3.17 6.35 60 90 180T10 MINIMUM OVERTRAVEL ALL FORCES MAXIMUM PRETRAVEL ALL FORCES MAXIMUM DIFFERENTIAL TRAVEL ALL FORCES MINIMUM RETURN FORCE (OZ./GRAMS) MINIMUM RELEASE FORCE (OZ./GRAMS) MAXIMUM OPERATING FORCE (OZ./GRAMS) CF CG CJ (50) (75) (150) OPTION CODE SWITCH CHARACTERISTICS CF CG CJ (50) (75) (150) CF CG CJ (50) (75) (150) T26 N/A .35 .71 20 N/A .07 .18 5 N/A .04 .07 .110 (2,79) .500 (12,7) .250 (6,35)

Miniature Snap-acting Switches CIRCUITRY TERMINATIONS

60 SCREW TERMINALS

4A .250" QUICK CONNECT 40 .187" QUICK CONNECT Y SPST N.O. (Single Pole, Single Throw, Normally Open) W SPST N.C. (Single Pole, Single Throw, Normally Closed) C SPDT (Single Pole, Double Throw) Not available with ‘F5’ rating option. Not available with ‘F5’ rating option.Not available with ‘F5’ rating option. Torque screws to 6 in. lbs max. J–16 Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ck-components.com