TM663D-S MORNSUN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

MORNSUN reserves the copyright Specifications subject to change without notice. TMXXXD/S A/0-2008 Page 1 of 2 mV-LEVEL SIGNAL AMPLIFIER

DESCRIPTION

Part Number Power Supply Input Output Isolation Power Output Channels TM663D/S 24V 100mV 0-5V None 1 TMS63D/S-24 24V 24mV 0-5V None 1 TM6S3AD-3 24V ±100mV 0-3V None 1 Note: We could also offer customer design for special input and output.

ELECTRICAL CHARACTERISTICS

Power Supply (Nominal Power Supply) ±5% Power Dissipation ≤2W Power Supply Data Power Protection Reverse protection Input Impedance ≥10 MΩ Input Data Overload ≤15V ＞1KΩ（Vout=max） Output Data Load ≤500Ω（Iout=max） TRANSMISSION CHARACTERISTICS Offset 0.1%F.S. Gain Error 0.1%F.S. Temperature Drift 0.0035%F.S./℃(-25℃ to +71℃) ISOLATION CHARACTERISTICS Galvanic Isolation Three port Isolation(input, output, power supply) Isolation Voltage 3KVDC(Tested for 1minute and 1mA max, humidity < 70%) Insulation Resistance 100MΩ，500VDC (Among signal input ,signal output and power supply) OTHER CHARACTERISTICS Operation temperature:-25℃ to +71 ℃ Ambient temperature Transport and Storage temperature:-50℃ to +105 ℃ Weight About 10g Application environment No dusts, gases of fiercely vibration, impulsion or gases that may erode to the components surrounded mV-level amplifier can receive the mV-voltage signal input from the scene, and transmit a standard output signal to the control room or DCS through isolation. W ith characteristics of high output accuracy, good line arity and low temperature drift, it needs an independent power supply, and three port Isolation among input, output and power supply.

FEATURES

  • Three port Isolation(input, output, power supply)
  • High accuracy (0.1% F.S.)
  • High linearity (0.1% F.S.)
  • Isolation voltage(3000VDC/60S)
  • High frequency response
  • Low temperature drift(35PPM/℃)
  • Industry class(Operation temp.: -25℃ to 71℃)
  • High reliability(MTBF＞500,000 hours) MODEL SELECTION TMXXXD Package style Power supply Signal output Signal input Isolation amplifier mV Signal input MORNSUN Science & Technology co.,Ltd. Address: 2th floor 6th building, Huangzhou Industrial District, Guangzhou, China Tel: 86-20-38601850 Fax:86-20-38601272 Http://www.mornsun-power.com Note: 1 .All specifications measured at TA=25°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified. 2 .See application circuits for more details.

MORNSUN reserves the copyright Specifications subject to change without notice. TMXXXD/S A/0-2008 Page 2 of 2 SCHEMATIC DIAGRAM APPLICATION NOTE 12- 11+ 1- 23+ 24- Vin- Vout+ Vin+ Vout- Power supply InputOutput APPLICATION CIRCUIT DIAGRAM 2414 13151620212223 234511 109 Pin+ Pin- NC Sin+ Sgnd NC NC NC NC Vout+ NC NC Sin- TMxxxDNC NC Input NC NC Iout+ Powersupply Output 1. Please read instruction book carefully before using the product. If you have any question, please contact with our technical support. 2. Please don ’t install in the dangerous zone. 3. The power supply is direct voltage. 220V alternating current is forbidden. 4. Don ’t divide the product privately in case the equipments ineffective or go wrong. AFTER SERVICE 1. Products are carefully inspected and controlled before going out from our factory. If they operated abnormally or there were anything wrong in the inner parts, please contact with our agents near you or technical support in our company as soon as possible. 2. 3 years warranty since the delivery date. During the period of quality guarantee ，our company will repair or change free of charge if product has any quality problem in the process of normally using. APPLICATION CIRCUITS See A GUIDE TO INSTRUMENTATION ISOLATION AMPLIFIERS for more detail. PACKAGING SIZE AND TERMINAL DESCRIPTION Vin+ Vin- NC Sin+ Sgnd NC NC NC NC Iout+ NC NC Sin- NC NC 2134591011 14151620212223 1324 2.00 0.079 1.00 0.039 10.20 (0.397) 1.150.15± 0.70 0.30 14.40 32.30(1.272) (0.560) 17.78(0.700) 10.20 4.00 0.65 27.94(1.100) (0.157) (0.397) (0.026) 14.40 32.30(1.272) (0.560) Vin+ Vin- NC Sin+ Sgnd N C N C NC NC Iout+ N C N C Sin- NC NC 213459101112 141516202122231324 PinFunction Output- Outputcurrent- Input+ Powersupply + FOOTPRINT DETAILS 1(Sgnd) 2(Iout+) 11(Sin+) 12(Sin-) 24(Vin-) 23(Vin+) Others NC 0.70 NC:No connection Pin Function 0.0450.006± (0.028) (0.012) (0.028) 19.24 (0.757) NC NC Vout+ NC NC Vout+ 3(Vout+) RECOMMENDED FOOTPRINT Top view,grid:2.54mm(0.1inch) diameter:1.00mm(0.039inch) Note: Unit:mm(inch) Pin section:0.50*0.30mm(0.020*0.012inch) Pin tolerances:0.10mm(0.004inch) General tolerances:0.25mm(0.010inch) First Angle Projection Outputvoltage+ Input- Powersupply -